how can i split the recieved data to my vb.net application and then save it, so for example whatever starts with e must be appended to a textfile and whatever starts with a must be display in the label.[URL]..
View 4 RepliesI am doing a project on Sending/ Recieving SMS through VB.Net 2008. I am getting the following string while recieving a message from the modem
+CMGR: "READ READ", "+919223336661",,"08/10/10,12:45:00+22"THIS IS A TEST MESSAGE
Now I want to break it and store in database as
Sender= +91223336661
Date Time= 08/10/10,12:45:00+22
Message=THIS IS A TEST MESSAGE
Where Sender, Date Time and Message are the column name of the database. The maximum length of the Message is 160 characters.
I am doing a project on Sending/ Recieving SMS through VB.Net 2008..I am getting the following string while recieving a message from the modem +CMGR: "READ READ","+91922333666 1",,"08/10/10,12:45:00+22"THIS IS A TEST MESSAGE..Now I want to break it and store in database as [code]where Sender, Date Time and Message are the column name of the database. The Maximum length of the message is 160 characters.
View 2 RepliesI am using Visual Basic express to create a serial interface to a multi-room audio controller. I have started by creating a form that can connect to the controller and I can receive data from the Controller and display Zone status, volume etc in corresponding texts box thaks to help from Stanav and Tassa in my previous thread.
My next problem is to do with receiving lots of data from the serial port and my application getting out of sync. This is mainly caused by turning the volum control as each time it is turned a little bit the controller sends out the new status of the Zone being effected
eg
****Turning Volume knob on Zone 1***
Status returned from Controller:
#Z01PWRON,SRC3,VOL05<CR>
[Code].....
I am trying to click on certain rows in a datagridview and have the information in the rows sent to a textbox. It does not append each row to the textbox though, which is what I want it to do. it just replaces it with the row I click on. What's wrong with my code. I have tried cell click too.
Private Sub dgProducts_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles dgProducts.Click
Dim i As Integer
[Code]....
I built a server to receive data from clients.But how can I know the length of every data package.
Dim bteAcceptData(1024) As Byte
Dim myAsyncCallBack As New AsyncCallback(AddressOf ReceiveData)
intByte = EndSocket.EndReceive(pIAsyncResult)
[Code].....
I am constantly receiving 2 lines of data via my serial port, example:
GPRMC, 151243.000 , A, 3723.2475, N, 10354.0208,E,1.26, 290.95, 9.0,,,A*67
GPGGA, 151244.000, 0122.4098, N, 10354.0212, E, 1, 04, 2.1, 71.4, M, 4.3, M,,0000*5F
Apart from the starting 5 alphabets which is the message ID, the other numbers are constantly changing every second. I wish to pick out specific values from these GPRMC and GPGGA and constantly update their respective text boxes, how do I go about doing that?
The 4th, 6th & 8th values of the GPRMC message (in this case '3723.2475' 10354.0208' and '1.26')The 10th value of the GPGGA message (in this case that value is '71.4')
the problem I am having is probably mainly because of I am very new at VB.net, anyway, the thing is, I am able to receive data from microcontroller successfully. The format of the data coming from the Microcontroller is shown below
0,2 1023,1023 1023,1023 1023,1023
1,5 1023,1023 1023,1023 1023,1023
2,8 1023,1023 1023,1023 1023,1023
[code].....
I am trying to communicate to a local AS3 Air app on my PC via sockets. The VB.Net app is acting as a server in this case while the Air app is a client. The .Net app sends data every 25ms to the Air app. I have not send any message termination. I just receive the data on Air app and process it.
[Code]...
I have the following code that listens to a serial port and writes the incoming data to a listview control (the serial data are a delimited string taht arrives once per second that I parse into separate listview subitems). I would like to be able to close/disconnect the serial port once a specific value in the incoming string is detected. For example, in this case one of the columns of data in the incoming string represents depth, I would like to close the serial port when the depth falls below a given number. I have tried the code below, but my program crashes on the SerialPort.CLose method.
dim m_strOBS() as string
Private Sub SerialPort_OBS_DataReceived(ByVal sender As Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) _
[code].....
I am writing a small application to see what data I am sending and receiving to my COM port (for a small hardware project based on url..).The problem I want to activate a "Serialread" or "SerialWrite" procedure as soon as data is waiting in the receive or send buffer.I have some basic skills so before I start digging in I would like to get some advice. Can I use a addhandler (I have read something about this on the internet but have to clue how to use it) or something else? Is there a way to check if data is in the buffer ready to be read or write??
View 2 RepliesI am current using VS2008 to write a little app to transmit hex data via the serial port to the target device and receive back data from it and display that on a text box.
The problem i am facing is receiving "read" data "hex" back from the serial port and displaying it. I am able to send data to the target system without any problem. For example, if i send this command "&H10, &H0, &H1, &H7E, &HFF, &H49" The LEDs on the system blink 10 times and it works every time. If i send this command "&H10, &H0, &H0, &HFF, &HD" i should get 5E back and I use Realterm to verify the communication and it works great. When i use my VB app it fails, instead of getting back 5E.I get "&H35, &H45, &HD, &HA" on the buffer
Private Sub sendbutton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles sendbutton.Click
Dim send_Buffer() As Byte = {&H10, &H0, &H0, &HFF, &HD}
[Code]...
I am writing a program to read data from the serial port using the data received event. But, I realised that My data received event run more than 1 time when there is a data received at the com port and this actually makes my reading command reads the wrong data. The correct procedure is whenever I send a "+++" over to my device. It should responses with "OK."message.
Why the DataReceived Event will read more than 1 time?
Below is my coding for your reference.
Public Class ControlProgram
[code].....
Is it possible to monitor how much traffic my application has used? I'm interested to see how much data that has been sent and received over the internet from/to my own vb.net application.
View 2 RepliesI'm having a bit of an issue receiving a stream of serial data and displaying the data real-time in my GUI. I am fairly new to VB.Here's what I'm trying to achieve: I have an I2C device (bank of LED's) connected to my Arduino. Using the VB.NET (2010) GUI I request which LED I want on (via buttons) and the I2C device then sends a reply confirming which LED actually turned on (basic feedback). Ok, sounds great right? Here's where I get issues. Well when I try to read the serial data sent to VB and display the real-time stream on the GUI, a) I get a bit of a mess as an output (values are ok, just spewn across GUI) and b) when I select a new LED to turn on, the GUI data does not refresh to this change. The stream being sent from the Arduino is ok, I looked at the data in a serial monitor.
[Code]...
How do I send XML commands in vb to get data received over a serial Port?
I know the commands I'm just not sure how to send them.
I don't know why this is. I am using VB 2008.net and I am trying to receive data on the serial port.
For some reason, the following event is not executing. Here is the
[Code]...
Just simple as of right now for debugging purposes. I have a breakpoint at getMe and it doesn't hit it at all. I know for sure that the serial port should be receiving data as I am using RealTerm to monitor serial port input data before I run my program.
I am trying to write something through serial port to my device. Before that, I added the data received handler to read the data when the device response with some data. The problem now is how can i check the status of the data received event? I need to know when the data received event has started or has ended before I can proceed to do some other task like check if the result is successfully receive.
View 2 RepliesI want to create a program that will keep track of the amount of (network/internet download) data that has been received, but I have know idea how to go about doing it.Where would be a good place to start with this type of development? Or could some one give me example code that will get me started.
View 1 RepliesI'm doing a project and want to do a graphical interface using V. Studio 2010. I want to use VB.NET as a programming language.
- Do I have to add any software to define VB.net?
- What is the function that reads the data from the serial port?
- If I want to receive more than one type of data, and I want to put/read them in separate text boxes, what is the function to filter the incoming data?
I have a TCPListener demo setup and working. The demo program has been supplied by Bill Chung, here:[URL]..the Listener uses a DataGrid to output whatever data is received but currently it doesnt store it.
Ive created a simple database and linked it to my project. what i need help with is getting the data that is currently outputted in the DataGrid to be stored into my DB table.
[Code]...
How can i monitor the HTTP data (headers including raw html data) that is sent and recieved while a user browses with a web browser control in my application?
is there some way to capture the connection itself into a socket?
my app will be parsing an array of data and generating text strings (of around 80 chars each), which I then want to append to a text file. What is the best (fastest) way to do the file appends? file size will be up to 40K lines.
View 2 RepliesI am building a simple proxy in server vb.NET and so far it has been successful, but then whenever i receive data from the internet and write it back to my browser's network stream using NetworkStream.Write the received data tends to come up slowly to my browser due to reasons i do not know of. But when I chain my application to another Proxy/listener on my local computer (e.g Privoxy), data seems to come up very fast to my browser. If anyone has an answer to this I would really love to know.btw here is the part of my code {subroutine} that receives data and forwards to my browser.
Public Sub ForwardRequest(ByVal Client As TcpClient, ByVal ClientMessage As String)
Dim Browser As TcpClient = Client
Dim BrowserStream As NetworkStream = Browser.GetStream
[code]....
I'm having trouble with parsing an XML data from serial port.Actually I need to parse it automatically after all data is received from serial port.I can display all the data in a richtextbox control and all data is received perfectly but my problem isit seems that serialdata.eof function seems like it's not firing.
here's some of my code:
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'set serial port properties
With COMPort
.BaudRate = 19200
[code]....
what i need to know is how can i automatically parse the XML data from serial port after all data is received.
I have this code I use on my form which has worked fine up until now I need to add another form to my project but the text from form 1 gets overwritten when form 2 gets added How can I append my data without overwriting the previous form.
Dim sfd As New SaveFileDialog
sfd.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
sfd.ShowDialog()
Dim writer As New System.IO.StreamWriter(sfd.FileName)
writer.Write(RichTextBox1.Text
[Code] .....
I have worked out all the other bugs in my Staffing app. A while back .paul helped me with exporting my data to excel. So what I need to do now is this:
Schedule AM RN's and export to excel DONE
Schedule PM RN's and export to excel appending to existing worksheet
Schedule AM NT's and export to excel appending to existing worksheet
Schedule PM NT's and export to excel appending to existing worksheet
Schedule AM WC's and export to excel appending to existing worksheet
Schedule PM WC's and export to excel appending to existing worksheet
I only need 1 workbook, and each new full schedule will be a new worksheet with the beginning date/ending date as the worksheet name.
Below is the code which I am using to append data to a text file.
Dim FILE_NAME As String = "C:cebsample.txt"
Dim objWriter As New System.IO.StreamWriter(FILE_NAME, True)
Dim record As String
Dim amount As Integer
Dim amt As Decimal
[Code] ....
Now I would like to save that updated file with another name.
I'm writing a program which uses sockets, Now the issue I'm having is, If the packet received is over a certain size, the socket then fails to receive anymore packets/data after it.
View 3 RepliesI am a newbie at VB.net and would like for you to review my code in order to improve its performance.My objective is to append a bunch of ".csv" files into daily data sets. Within a directory I have about 2500 individual text file (.csv). Each file represents minute intraday stock market data for an individual stock covering 5 days or one week of data. This means that each symbol has 1950 string lines..Here is an example of what a string line looks like: "2011-06-27,10:07,48.15,48.15,48.02,48.02,25421". Not that is relevant but these represent Date, time,Open, High, Low, Close & Volume. Since I have 2500 files within a directory; doing some math, I am processing 2500*1950 = 4,875,000 lines. This process takes me about 16 hrs to run.[code]
View 7 Replies