I have list box with item priced. when a user select item and add to the cart then calculate it should display subtotal. My error is when I do it again my previous subtotal add to the next one.
this is my code
Option Explicit On
Option Strict On
Option Infer Off
[Code]......
I've actually gotten this program running on paper, BUT, when I try to write a code for it, it doesn't work . . . somewhat . . . When the user clicks the compute button, the total value of inventory is computed by multiplying the cost per item times the quantity of the item and then adds the result to the value in an accumulator variable.
So far this is what I've come up with:
CODE:
The quantity and cost per item is suppose to multiply each row, but it only multiplies the first row.
I am using vb.net 2010. I have a datagridview whose data source is a data table. I dynamically add rows to the data table.
[Code]...
After adding the new row, m_table is correct. However, DVGCusClient not only adds this row, but also adds two additional blank rows at the bottom. I have no idea where these two blank rows come from. Why I use above code is as follows: Use a data grid view to display data. When a user clicks a row, another form is opened which allows user to search/input some data.When the user closes the form, all data is saved to a data table and shown on the data grid view.
In my form, I have textbox + combobox to enter datas which are saved to ms access. I have search option too. Also i have DataGrid to show the result of the search. What I want now is, 1. To show the search result in the textbox/combox as well (I already am able to make the result show on datagrid)2. When there are multiple result showing on DataGrid, if i click on a particular result on DataGrid, let the textbox/combobox automatically loads the details of the one i clicked.
View 6 RepliesIn Datagridview, Set as DatagridView1.ReadOnly=True,
Dgv1.Rows.Add()
When i tried to add a Row, it is copying previous Row data to new row,and also blank the previous row, why?Like Insert Row, Why...?
I'm pulling the data from a database (via dataset) and presenting in a Datagridview.
I need to have a column to display the total of �amount� column.
How can I do this?
This is not for ASP.NET but for VB.NET 2008.
I'm pulling data from a database (via dataset) and presenting in a Datagridview.
And i need to have a column to display the total of amount column.
This is what I have, but its not working for the total at the end..the IF bit at the subtotal...
Description
Qty
Unit Price
Total
FORMTEXT
[CODE]...
I am having trouble adding a 5% discount to a subtotal of 50.00 or more and then have it display in the discount box and then having the total show up in the total box.
Here is my code.
Public Class GroceryStore
Private Sub CalculateButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CalculateButton.Click
'Calculate totals
Dim subtotal As Double
[Code] .....
I am using crystal report for displaying reports. I want to display group by customers in report that i am displaying using group by funtion but i also want subtotal of that group by customers. I want to display received amt date, received amt and balance amout between given two dates. That i am getting. output is like first customer name and below that list of there received and balance amt with received amt date. But before displaying second customers list i want to display subtotal of received and balance amt. and in last in page footer i am displaying grand total of received and balance amt.
All data are displayed instead of subtotal of all customers. how to display subtotal of all customers received and balance amt?
I need to get a subtotal from multiple forms and add them together on the main form. I can add two forms together but not the third.
View 1 RepliesI'm having trouble removing both the number of adult golfers and children golfers in a group. I want to remove the item as well as update the order subtotal.
The Minigolf form code
Dim intTotalGolfers As Integer = 0
If IsNumeric(txtNumberOfAdults.Text) Then
If CInt(txtNumberOfAdults.Text) >= 0 Then
[Code]....
I dont know how to get the program to do the total calculation after i delete an item from the listbox. Basically i have 2 forms. One is the shopping item list and the other is the shopping cart.
Here is my codes:
Public Class Form1
Public totalBuy As Single
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code].....
I am working on a project for a class, and am having trouble getting my program to automatically calculate the subtotal every time an item is added to the shopping cart list. I've tried sub procedures and functions, but I can't seem to get it to work.
[Code]...
I am currently having a headache on how to solve this problem that i am facing. here is the situation: I have a combobox and a list box on the main form. The combobox will get the data from the ms access database. In the database, i have the details of a person's IC, Name and DOB say for eg on one entry I have D215311523C,SHAWN,13/04/1987 So now, my combobox on form load will show the list of dates in the database to allow the user to search base on the date itself by clicking on the selected date. So when the user clicks on the particular date say 13/04/1987, people in the database whose birthday is 13/04/1987 will be shown on the listbox.Meaning to say if i have 3 entries whose dates are the same 13/04/1987, 3 entries will appear. If there is only two entry, then two results will be shown. But now, when i do a single click on the date, one result will be shown. That is correct. But the problem is when i click on the same date again, three of the same results will be shown on the list box. that is it will display : 13/04/1987 13/04/1987 13/04/1987 which is not the case. Then it will show more duplicates of the same results if i click more times on the same date which should not be the case.
Dim n As Integer
Dim numbers() As Integer
Dim StartFrom As Integer
Dim EndAt As Integer
[code].....
I am using a datagrid in my where i am having four columns. In first column the parameter values are entered and in the second column measured value is entered and in third column the nominal value is entered.Inthe fourth column the result is displayed by subtracting the measured value and nominal values. I am doing this calculation in Datagrid cell validated event. What i want is,there will be many rows in the grid,when typing the value in the third column the corresponding result will be displayedin the rowof theresult column,save button will be displayed while the form loads,when the calculate part is completed that is there should not any cell of the resut column empty then i should enable the save butto.
View 2 RepliesI am encountering the following issue So i have a device that sends stuff at the serial port, i then parse it and put it into an array of bytes like that:
Dim HCI_Command_Rcvd_Byte() As Byte All good till here What i wanna do is make an array and put this result every time the serial port gives me a new result, for example:
[Code]...
Basically what i wanna do is let the port parse the messages, fill in the array with the result at an empty spot in this array and then i will have a separate thread that will look in into this array in each non empty space and after it looks into the non empty space it will use or discard the info and also mark this space as empty (after it checked)
I just read about DataSet in VB.NET, it uses disconnected concept. My question is: if my apps has "List All" button that query data from 1 table in the database, and that table has "very very very" many rows, so my DataSet will be filled with those data and eat up memory. Can I limit the data that being put to the DataSet from that query? But I want to be able to retrieve the next data from the same query if the user want to see it?
For example:
I have 1000 rows in my database, and i query all of them. But I just want 200 rows being inserted to my DataSet, but if the user want to see rows number 201 and so on, I want to be able to retrieve the next 200 rows, and so on. So it just like cutting those data into a group of 200 rows. Can I do this with the concept of "disconnected" of the DataSet?
I'm using Visual Basic 2005 Express Edition and I was just wondering if someone could help me out with a few things? I'm making a Notepad-type program just to clarify things.1. I have a button which adds text to my RichTextBox1 (excuse the name), but when you click it it adds text to the end of the script. I want to make it so the text is added where your "cursor" (the blinking thing which lets you know where you're typing) is, at the current part of RichTextBox1. At the moment I'm using:
RichTextBox1.Text = RichTextBox1.Text + "The text I'm adding" If anyone could tell me the code to make it put "The text I'm adding" at your current cursor that'd be great.
2. I have a Save As button and a Save button. When you click Save As and save the file it works 100%, when you click Save and you haven't saved previously then it works 100%, but after you have saved the file and then click save it doesn't overwrite the file. Here's the code for Save:
[code]...
So if anyone can tell me the code that's needed so it will overwrite the current file 3. I have a FontDialog but I have no idea what the code is supposed to be to make RichTextBox1's font change after you click Okay in the FontDialog.
On compiling a visual basic assembly, int32 variables are cast as int64 for calls to adodb methods that require int32. This results in a method not found exceptions at run time. The unnecessary cast operation can be seen when using reflector to inspect the site of the method call and is not present in the source code.To further muddy the waters when the code is compiled on my 64bit windows 7 machine all is well, but on a 64bit windows 2008 r2 the unnecessary cast is added.
View 1 RepliesHow can I create a separate class that has the function that adds dynamic text box, so that I will just call that function to my main form. I have the code below that does add dynamic text box but it is already inside the button of my main
[Code]...
i'm working on an extended combobox control that adds it's items in sub new.
it works but for some reason the form's designer.vb file has an addrange line for the combobox, that results in the items being added twice.
does anyone know how to fix this?
I have a text box that accepts an 8 digit hex encrypted string and adds it to a listbox1. Then I have a button that when clicked takes the string from listbox1 and
1) reverses the string
2) subtracts 235
3) Converts it back to a 9 digit number
4) Adds it to listbox2 using the code:
Code:
Private Sub decrypt_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles decrypt.Click
[code]...
However something seems to be wrong because it get an arithmetic overflow exception. Does anyone know what happens to be wrong with my code?
To add Row programmatically,
Connected Datagridview with datatable
I like to add Blank Row in the datagridview, So
On the Last Cell, CellLeave Event
Datatable1.Rows.Add()
It is adding a row in the dataTable, but adding two rows in the datagridview, why...?
You can find a feedback report with instructions on how to duplicate the problem I'm having at: [URL]
View 1 RepliesI have a VB2008 application that uses SQL Server 2005 Exspress Edition. I was modifying my application and then decided to add a table to the mdf (named "Pipe.mdf"), which I have don many times before, but I must have messed something up when I made other changes. After I added the new table I opened the Dada Source Configuration Wizard to add the new table to the dataset and I don't see the new table to select it. However, it added a copy of "Pipe.mdf" and named it "Pipe.mdf1" to the Server Explorer.
If I delete this copy of the mdf, it appears again in the Server Explorer when I open the Data Source Configuratuion Wizard.
If I add a Table to the copy of the mdf ("Pipe.mdf1"), it shows up in Dada Source Configuration Wizard.
what to change so that the new table appears in the Data Source Configuration Wizard for the original mdf (Pipe.mdf) and not add the copy of the mdf?
Check process handle count:In Task manager, View, Select columns, mark Handle Count to the view.(The process when loaded has about 333 handles)
Operation:The new thread is set equal to an existing thread, then the existing thread is started and aborted. How does one restore the old handle count? Why do the handles increase by a random number and do not revert?
How can Idisposable/CloseHandle/or GC.collect, Finalize() work in this situation? I'm trying to return the handles to their original count, 333, when I start a new thread it adds 4,5, or 6 handles per new thread(even if the thread is aborted and set to nothing).
[Code]...
I'm new to VB and trying to convert numbers to a string then add the string together but VB keeps putting a space at the beginning of each number after i convert it to a string.
[Code]....
I have a situation where I want to add penalty charges after every hour. For example if a target is not met it will start to incur penalties. So after every hour an 80 pound charge is given until it reaches the 5th hour where the penalties incur a 90 pound charge. Is there a way of doing this?
View 2 RepliesI'm trying add a new row to my databaseTo add a new record a pop up form opens (form2) with a textbox for the user to input their name, they then click the save button and the popup form closes and the main form (form1) is still showing and the added row seems to updated in combobox although it is blank!.This causes a new blank row to be added to the database - the data in the textbox is never saved to the database
vb
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
[code].....