The program I have created will ping 4,000 ip addresses--each on a different thread. If the ping comes back successful, then it will update a database with its IP address.I get an error message saying "Could not update; currently locked" after about 30 seconds of updating the database.
View 8 Replies
Environment = VB.NET 2005 & Pervasive SQL 9.5 ADO.NET In a simplified example, I have single database table (customers) with the columns "customer_code_PK" and "customer_name" This table is presented in VB.NET 2005 as a single form datagrid (bindingsource/dataset). In this example, the database table is populated with the following data
customer_code_PK customer_name
SHELLShell Oil
BPBritish Petrolium
MOBMobile
In very simplified terms, code does the following;
sub on form load
fill dataset with database records (select * from customers)
[code]....
The datagridview loads the records correctly.Here is the sequence of operations that produces the bizzar behaviour.In the editable datagrid;
1.remove the row with PK = MOB -> save_button -> Database correctly updates
2.add a new row with PK = KFC -> save_button -> Database correctly updates
3.remove row with PK = SHELL -> save_button -> Database exception occurs
On this last command, the row SHELL is INSERTED!!, not removed.However, If I change ths save_button routine to this
save_button
call generate_custom_updateinsertdeletecommands
bindingsource endedit
[code]....
It works correctly !Is it correct that you would need to "refresh" the sql update commands after every tableadapter.update?
I'm using TableAdapters in VB.NET (VS2008) to an SQLCE DB. These are associated with a range of DataTables in my DataSet.
I'm trying to simplify my app and I'm wondering : If I call the Update method of a table adapter and there have been no changes, then will the TableAdapter still open the underlying database, or is it smart enough not to bother?
At present I'm using simple boolean flags to keep track of which DataTables have modified data - and it works fine - but I'm just thinking I might be able to simplify my code just by always letting it call the updates. But I only want to do if it won't add an overhead.
I have a form that has a datagrid thats being filled by data from a temporary database (called Scratchpad3) and what I'm needing to do is to update another table that's not part being called with my table adapter. My table adapter looks as follows:
Me.Scratchpad3TableAdapter.Fill(Me.MDRDataSet.scratchpad3)
and the table that I need to update is called ExceptionsEdit.
I have a VB windows Form project that connects to several DataTables in an Access DB. On my form I have several textboxes, comboboxes and datetimepickers that are bound to those sources. With one table in particular when I try to update the tableadapter after editing one of the textboxes the update method fails. No exceptions are thrown, but the update method returns a zero value and the data is not updated. The update will work when just the comboboxes or datetimepickers are edited, but as soon as a textbox is edited also, update will not work.
Other DataTables within the project are set up in the same manner but are not having update issues. I can't figure out what about this one particular table is causing an issue. Can anyone give me any thoughts on where or what to troubleshoot?
I´m trying to update the database i´ve already have de data set BDHERGAIMDataSet with all my tables(tbboletines is one of them) i add a new row, and set the values of each column of the row in the table and then try to update the database.It doesn´t give me any errors when I run it but it doesn´t write nothing on the database table....
Dim newvobol As BDHERGAIMDataSet.tbboletinesRow
newvobol =Me.BDHERGAIMDataSet.tbboletines.NewtbboletinesRow
newvobol.idnaturaleza = 1
[code]....
In VS STUDIO 2008 I have made a datagrid , where i have set yes too edith, new and delete.this works fine, but now i need some code in form closing to Update my tableadapter to the value from my datagrid
Yes i know there are many Question about this i have read and read this answers but i Can't fine out how to make yhis to work
Why does my code not update my Table...
Private Sub btnSaveChanges_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSaveChanges.Click
Me.EmployeeBindingSource1.EndEdit()
[Code]....
I am working on V Studio 2005, VB. I got the following error:
'update' is not a member of DataSetTableAdapters.TableAdapter
I cannot understand why this happened? and now because of it, I am not able to update values in the table.
someone pls help me with this.
I am writing some data to my Database using TableAdpater.Update and the operation can take up to one minute to complete.
Is there some way to report the progress of this to the user because they think it has stopped responding.
how would i go about resetting or refreshing a table adapter before it fills a data grid view (load event). As i have tried a number of things to get it to refresh but it seems that the data connection to the Database is simply not closing and re- openingwould i have to program it to be a manual thing to retrieve the data from the database or am i just not doing it right
View 2 Replieshow would i go about resetting or refreshing a table adapter before it fills a data grid view (load event). As i have tried a number of things to get it to refresh but it seems that the data connection to the Database is simply not closing and re- opening would i have to program it to be a manual thing to retrieve the data from the database or am i just not doing it right.
View 2 RepliesAddNodesTableRows As SampleDatabaseDataSet.NodesRow
Dim i As Integer
For i = 0 To 10
AddNodesTableRows = SampleDatabaseDataSet.Nodes.NewNodesRow()
[code]....
End Try I've get no errors or exceptions from this code but it will not put the data into the database file. It always run through the "update successfull" yet nothing is ever written out to the file.
I am trying to use VB.net to update a datarow (record) using a tableadapter but it won't update.
I created a tableadapter based on the following query which will add a new row, but can't find the way to update the row already in the database.
SELECT Player_ID, FirstName, LastName, Gender, Notes
FROM tblPlayerInfo
WHERE (Player_ID = @Selected_Player_ID)
[Code]....
I have two tables that i got from northwind Database and made one out of it from order_details and products and the new table is DataTable1 it has data from both previous tables how do i update that new tableFPENA
View 2 RepliesI have a dataset that fills a tableadapter and I'd like to be able to post changes made to the dataset to a database with a date marking the changes. I've never used the TableAdapter.Update method before and was wondering if someone has any good tutorial links for that method. Here is the
[Code]...
I have a dataset that fills a tableadapter and I'd like to be able to post changes made to the dataset to a database with a date marking the changes. I've never used the TableAdapter.Update method before and was wondering if someone has any good tutorial links for that method.
[Code]...
I have a TableAdapter I created in the DataSet designer. It contains joined tables and I set it up to automatically generate Insert/Update/Delete commands. I understand that I have to write my own UpdateCommand. I did so, in the DataSet Designer, for this particular TableAdapter.
The issue is that the Update Method is not showing up via IntelliSense, when I attempt to write code like this:
vb.net Dim x as Integer = Me.DPTableAdapter.Update(), IntelliSense does not show the Update Method with the parameters I set up.I created the same exact method with another TableAdapter, in the same manner, and it worked just fine.
I also call EndEdit on the BindingSource, I just did not put it in this post.
I'm an experienced Office & VBA programmer, I am new to .NET programming. I'm in the process of migrating an Access 2007 database application from Access to Visual Studio Visual Basic project for further development. In particular, I am interested in using .NET controls to display data in a user-friendly hierarchical grid control.The data for each hierarchical display is stored in two separate tables (I call them tblData and tblExtraInfo), and then I use a query to join the data and prepare for display (I call the query qryBOM).
[Code]...
Whenever I create a table adpater the wizard does not create and update command. It creates Select Insert and Delete but no Update command. I have a primary key in the data and have completely deleted my dataset and created connection and table adtaer from scratch with still no update command wizard says it will create it but does not.
View 5 RepliesI use this save code which is generated when I drog and drop table from data source to form[code]...
View 1 RepliesTableAdapter.Update(...) Inserts NULL Values in all columns for a new record?
View 4 RepliesI need your support here. I have one dataset with numerous table adapters in one project. All fine. Now, in another project I am referencing the same dataset. I have added it as a link.So far so good. However, when I change a tableadapter in my main project store and close, and then open my other project the changes to the tableadapter are not there. For example, I have been adding an additional field to an adapter. But when running the second project that field is not part of the tableadapter.
After investigating a bit, I can say that, for whatever reason, when I link the datasets XSD file it created a copy of the respective Designer File. There is now a link to FundResultContainer.designer.vb, as a child of FundResultContainer.vb. But there is also a FundResultContainer1.Designer.vb as a child of FundResultContainer.xsd.
Like this:
FundResultContainer.xsd - FundResultContainer.vb -- FundResultContainer.designer.vb - FundResultContainer.xsc - FundResultContainer.xss - FundResultContainer1.Designer.vb
This could be causing my problem. However, to clean it up, I have removed the whole tree (dataset) and linked only the XSD file again. IT does again create a second designer file, exactly as above.
I have a project which contains a large number of lookup tables, and I have all of these lookup tables represented in a single typed DataSet, which contains TableAdapters for each lookup. I've designed an editor for these lookup tables, which should allow editing of one of these at a time. My front-end is written in VB and WinForms, the back-end is a SOAP web service; I can successfully pass the changes to the DataSet back to the web service, but can't find a way to use a TableAdapter to update the single table that has been changed.
What I'm trying to do is instantiate the appropriate TableAdapter for the updated DataTable by sending the name of the table back to the web service along with the DataSet, then referring to the TableAdapter with a dynamic name. The normal way to instantiate a TableAdapter is this:
Dim ta As New dsLookupsTableAdapters.tlkpMyTableTableAdapter
What I'd like to do is this, but of course it doesn't work:
strTableName = "tlkpMyTable"
Dim ta As New dsLookupsTableAdapters(strTableName & "TableAdapter")
Is there any way to achieve this, or am I taking the wrong approach altogether? My other alternative is to write separate code for each table, which I'd prefer to avoid!
I have a gridview in which when I click edit, update, and cancel button comes. I have a variable named status. If status=false then update should change to insert and if status=true then update should be update itself.
<asp:TemplateField >
<ItemTemplate>
<asp:LinkButton ID="lnkEdit" runat="server" CommandName="Edit" Text="Edit">
</asp:LinkButton>
[code].....
We have two update panels on our webpage. Now first update panel is having button cancel. While second update panel is having a file upload control.Now if the user uploads a file that is going to upload in about 2 mins, and in between, say after 30 seconds the user clicks the cancel button, the upload taking place in update panel 2 should stop.
View 2 Repliesupdate statement, i am trying to update a row within a access 2007 database here is my code.
[Code]...
I am using vb.net with access database. I am using sql. How can i update database with the value 40'6"(Feet and inches values)
View 5 RepliesI have an issue with a data base updating it won't update for me in debgging mode it is stopping here on this bit of code which is highlighted in red. the error which comes up is .(update requires a valid update command when passed datarow collection with modified rows.)
Public Sub UpdateDataSource(ByVal ChangedRows As database.dataset1)
Try
'The data source only needs to be updated if there are changes pending.
If (Not (ChangedRows) Is Nothing) Then
[CODE]...
I am using an update panel and when I click a button it will update all the panels. updapanel1.update() is very simple, but my data is not updating unless I hit the button twice. My gridviews shows data for a selected user, and then all the grids reflect that users data. works fine all the update panels work for the gridviews. Now for somereason when i try to do a row count and update the panel with the summary, it does not work, i get either the previous users summary or if i hit update again for the same user i get the correct data.
[Code]...
