I'm trying to make it so when you hover over the Exit button it shows "Click here to exit the program."
I have this under the Exit buttons ToolTip1.SetToolTip(ExitButton, "Click here to exit the program")
But when I hover my mouse over the exit button nothing pops up..
I am trying to build a small program which will allow some one to click on the exit button and the sound will play and at the end of the sound the program will then close. The sound clip is about 3 seconds long Here is what I have:
Imports Microsoft.DirectX
Imports Microsoft.DirectX.DirectSound
Public Class Form1
Private Dsound As CSoundDevice
[code]....
I'm developing a program using VB 2005.I've tried to use the following instructions to "kill" the application
Application.Exit()
Environment.Exit(0)
(not at the same time)
[code]....
I have eight labels which is supposed to get message using the tool tip. I have used code to set tooltip message using the following:
strinpErr = "Message for tooltip
Me.ToolTip1.SetToolTip(Me.lblinpErr, strinpErr)
ToolTip1.Active = True
But I am not getting any tooltip message.
I have a form which checks on load if an host (ip) is available. If not it shows a messagebox and exits the application.
Here is when the problem occurs.
Now the messagebox shows just a short time, then the app exits automatically. But what I would like is, after a user hits the OK button the app exits.
Here is the code I use:
Private Sub SplashScreen1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Try
[code].....
I am trying to make my form when user clicks on the exit button it will go to the tasktray bar. But when right clicked it will exit the application. How would I do this? I have a ToolWindow
View 3 Repliesi need to run sql database backup tasks everytime i click on Exit button. Suppose my database name is -myauthor which contains tables,views,procedures and this is my windows forms. as soon as i click on Exit button i want my database myauthor should create a backup file or is there any other way to do with windows forms.
View 2 RepliesI have this program and I want to put either a Quit button or Exit Button to quit the program (besides using the 'x' at the upper right corner)
View 3 RepliesI added a banning function to my program, to prevent certain people from using it (obviously). It checks for their IP and hostname, and if either match, display an error inside my error form. When that form closes, close the program. In the project properties, it's set to start shut down when the LAST form closes. This is the form closing code.
Private Sub DenyAccess_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
For i As Integer = My.Application.OpenForms.Count - 1 To 0 Step -1
[code].....
I've been working on two projects, one needs to have multiple forms, but when I open one form, it needs to close the sender.
But, when I try it, the program exits! I don't want it, I just want to close the form, not the app.
I tried the 'Form1.Hide()' too, but it doesn't sound good to me. There is other approach?
I have main program and use the componant , and I need to stop and exit the program from the component
View 10 RepliesI've got the following code that just does a WMI connect to a remote machine - I haven't setup any code to query anything yet but when I step through the code I don't get any errors. I get to the last debug.print statement and when I step over it the program exists. Almost like I've called a End. No errors or anything - it just exists. How come it doesn't take me back to the form? IF I comment out " scope.Connect()" then it ends the sub and returns to the form.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim displayString As String = ""
Dim pcTag As String = "server"
[code]....
I have just started a simple project in VB 2008 express (having previous experience (not much though) in VB6). At the moment I have only 1 form and when I click on the red x close button the form closes but the process is still running in task manager. I have the following code which I assumed would exit the program and terminate the process but it doesnt seem to work[code]...
View 6 RepliesI have an application that the main screen currently has all exit functionality removed by use of a class. I want a certain key combination to exit the program, but cannot figure out how to do this. I.E. Ctrl + X.
[Code]...
When I close my program, it stays in Processes? Is there any way I can make sure it does not?
View 12 Replieshow I can allow the program to exit while the textbox is empty but I can't figure out how it works really..it will not allow me to exit,enter, or tab out of the textbox while its empty.
Private Sub gradeTextBox_KeyPress(sender As Object, e As System.Windows.Forms.KeyPressEventArgs) Handles gradeTextBox.KeyPress
Select Case e.KeyChar
Case "0" To "9", vbBack, vbCr
e.Handled = False
[code]....
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Hide()
Dim value As String = """" + Application.ExecutablePath + """ -nogui"
[code]....
I want the program to exit the sub after the timer has been started. But if theres no args, it should just show itself. The problem is that it seems to not care about the exit sub thingy, cause it shows itself anyway.
I'm having a bit of a problem getting my application to close properly. Basically I have one main form from which all other forms open. If a user tries to close that main form, I want to bring up a MessageBox asking if they want to exit the application.However, when I try to do that it asks the question twice. It seems that the Application.Exit() is triggering the FormClosing event again for some reason, but I don't know of another way to exit the application. BTW, the main form isn't the startup form so I can't use the option to close when the startup form closes.
View 9 Replieshow to display folder on desktop:What I did was:My program read external text files and generate word documents files on d:stage-in.After program finished (exit VB application), how to display folder "d:stage_in" on screen.
View 3 RepliesI'm not asking how to exit the program( dispose() ) instead I have a program that checks if a certain process is running and if so it displays a message box, stops the process and (Should) exit the program. If the process is not detected then the program loads normally and opens an external program. My problem is that it stops the process and still runs the program. How can I fully stop the code and exit my program?
View 4 RepliesI have a mini form application. What I need is to have a message box asking the user to confirm exist. Yes/No. This should happen if the user click the exit button on the form or the (X) on the title bar.
I have this piece of code attached to the exit button on the form. I'm trying to use an if statement but don't have a clue as to how I can apply it to what I already have.
Private Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
MessageBox.Show("Are you sure you want to exit?", "Confirmation", _
[Code].....
My problem is that Application.Exit doesn't work, and the program just continues along as normal.The General Overview of My Code Follows:
Private Sub Run()
'Some Code
If problem found (i.e. incorrect data in file) Then[code].....
Now I have a sub to validate a bunch of textboxes and combo boxes.I previously used many IF statements to validate and pop up different messageboxes and Exit Sub in every IF statement.But I heard that too many Exits will decrease the efficiency and they were not recommended to use. Instead, nested IF is better because it will let the process naturally go to the end.Then I found out that if I use nested IF,it will be hard to read, since messageboxes are all separated from conditions.
View 2 RepliesI want to create a simple autoclick program. What I want to to is a program that makes a click were the mouse cursor is at every 5 minutes (or at any defined period of time) for instance.
View 4 RepliesHow can I make a program so you click a button and select a File using a OpenFileDialog and click send on your computer and it will send the file to a different computer and then a SaveFileDialog will show asking where to save the file on the other computer. Oh ya I cant use WinSock or whatever becuase im using Windows Vista 64 Bit. I need it because I for some reason cant use printer sharing. It might be because im on A 64bit Vista Machine and I want to print a file off of a 32bit XP Home Machine.
View 6 RepliesHow do I exit from the recursive loop from the code below. I would like to notify the end-user to select a checkbox in a msgBox before I exit the loop.
[Code]....
I have just done my program, just skeleton not completely, the final problem has not been solved up to this time.When I run my application, the Icon of its will be showed at TaskTray. I would like the icon is there when I exit fom of application and then If I double click on the Icon, the application will be showed.
View 5 RepliesHow can you add a image where when you double click on the icon and the program starts it shows a picture before the program loads. Like Photoshop startup or the new 2010 visual Basic express start up
[Code]...
I have to create a program where the user enters 2 numbers and the program outputs all the even and odd numbers between those 2 numbers.I have that part of the code complete. But now I have to enter code where if the user enters a letter instead a number in either input box, that a message pops up and tells them to enter a number, instead of a letter... I keep going round and round on this and can't seem to get it quiet right.Here's my
'Author: Ambre A. Coleman
'Purpose: To show all odd and even numbers betweeen two entered numbers
'Date: 09/14/2011[code].....
I am really confused! My program doesn't work if I don't have Visual Studio here in my PC. To test it I have uninstalled Visual Studio. But my program doesn't work though Flash Player is present there (I have used Flash animation in the first form).
To be more sure about it I have installed Flash. But it's not working! That means the Flash animation file (.swf) is not making a problem! It needs support from Visual Studio to start. Doesn't it mean that some files are not attached with a setup file as a result it needs Visual Studio to run? Let me tell you how I create a setup file of my program.
CODE:
When I click on the icon of my program it shows the error message
CODE:
Reporting details: This error report includes information regarding the condition of WindowsApplication1. When the problem occurred the operating system version and computer hardware is use; your Digital Product ID, which could be used to identify your license; and the Internet Protocol(IP) anddress of your computer.