Way To Exit A Program
Mar 30, 2010I have this program and I want to put either a Quit button or Exit Button to quit the program (besides using the 'x' at the upper right corner)
View 3 RepliesI have this program and I want to put either a Quit button or Exit Button to quit the program (besides using the 'x' at the upper right corner)
View 3 RepliesI'm developing a program using VB 2005.I've tried to use the following instructions to "kill" the application
Application.Exit()
Environment.Exit(0)
(not at the same time)
[code]....
I added a banning function to my program, to prevent certain people from using it (obviously). It checks for their IP and hostname, and if either match, display an error inside my error form. When that form closes, close the program. In the project properties, it's set to start shut down when the LAST form closes. This is the form closing code.
Private Sub DenyAccess_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
For i As Integer = My.Application.OpenForms.Count - 1 To 0 Step -1
[code].....
I am trying to build a small program which will allow some one to click on the exit button and the sound will play and at the end of the sound the program will then close. The sound clip is about 3 seconds long Here is what I have:
Imports Microsoft.DirectX
Imports Microsoft.DirectX.DirectSound
Public Class Form1
Private Dsound As CSoundDevice
[code]....
I've been working on two projects, one needs to have multiple forms, but when I open one form, it needs to close the sender.
But, when I try it, the program exits! I don't want it, I just want to close the form, not the app.
I tried the 'Form1.Hide()' too, but it doesn't sound good to me. There is other approach?
I have main program and use the componant , and I need to stop and exit the program from the component
View 10 RepliesI've got the following code that just does a WMI connect to a remote machine - I haven't setup any code to query anything yet but when I step through the code I don't get any errors. I get to the last debug.print statement and when I step over it the program exists. Almost like I've called a End. No errors or anything - it just exists. How come it doesn't take me back to the form? IF I comment out " scope.Connect()" then it ends the sub and returns to the form.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim displayString As String = ""
Dim pcTag As String = "server"
[code]....
I have just started a simple project in VB 2008 express (having previous experience (not much though) in VB6). At the moment I have only 1 form and when I click on the red x close button the form closes but the process is still running in task manager. I have the following code which I assumed would exit the program and terminate the process but it doesnt seem to work[code]...
View 6 RepliesI have an application that the main screen currently has all exit functionality removed by use of a class. I want a certain key combination to exit the program, but cannot figure out how to do this. I.E. Ctrl + X.
[Code]...
When I close my program, it stays in Processes? Is there any way I can make sure it does not?
View 12 Replieshow I can allow the program to exit while the textbox is empty but I can't figure out how it works really..it will not allow me to exit,enter, or tab out of the textbox while its empty.
Private Sub gradeTextBox_KeyPress(sender As Object, e As System.Windows.Forms.KeyPressEventArgs) Handles gradeTextBox.KeyPress
Select Case e.KeyChar
Case "0" To "9", vbBack, vbCr
e.Handled = False
[code]....
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Hide()
Dim value As String = """" + Application.ExecutablePath + """ -nogui"
[code]....
I want the program to exit the sub after the timer has been started. But if theres no args, it should just show itself. The problem is that it seems to not care about the exit sub thingy, cause it shows itself anyway.
I'm having a bit of a problem getting my application to close properly. Basically I have one main form from which all other forms open. If a user tries to close that main form, I want to bring up a MessageBox asking if they want to exit the application.However, when I try to do that it asks the question twice. It seems that the Application.Exit() is triggering the FormClosing event again for some reason, but I don't know of another way to exit the application. BTW, the main form isn't the startup form so I can't use the option to close when the startup form closes.
View 9 Replieshow to display folder on desktop:What I did was:My program read external text files and generate word documents files on d:stage-in.After program finished (exit VB application), how to display folder "d:stage_in" on screen.
View 3 RepliesI'm not asking how to exit the program( dispose() ) instead I have a program that checks if a certain process is running and if so it displays a message box, stops the process and (Should) exit the program. If the process is not detected then the program loads normally and opens an external program. My problem is that it stops the process and still runs the program. How can I fully stop the code and exit my program?
View 4 RepliesI have a mini form application. What I need is to have a message box asking the user to confirm exist. Yes/No. This should happen if the user click the exit button on the form or the (X) on the title bar.
I have this piece of code attached to the exit button on the form. I'm trying to use an if statement but don't have a clue as to how I can apply it to what I already have.
Private Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
MessageBox.Show("Are you sure you want to exit?", "Confirmation", _
[Code].....
My problem is that Application.Exit doesn't work, and the program just continues along as normal.The General Overview of My Code Follows:
Private Sub Run()
'Some Code
If problem found (i.e. incorrect data in file) Then[code].....
Now I have a sub to validate a bunch of textboxes and combo boxes.I previously used many IF statements to validate and pop up different messageboxes and Exit Sub in every IF statement.But I heard that too many Exits will decrease the efficiency and they were not recommended to use. Instead, nested IF is better because it will let the process naturally go to the end.Then I found out that if I use nested IF,it will be hard to read, since messageboxes are all separated from conditions.
View 2 RepliesHow do I exit from the recursive loop from the code below. I would like to notify the end-user to select a checkbox in a msgBox before I exit the loop.
[Code]....
I'm trying to make it so when you hover over the Exit button it shows "Click here to exit the program."
I have this under the Exit buttons ToolTip1.SetToolTip(ExitButton, "Click here to exit the program")
But when I hover my mouse over the exit button nothing pops up..
I have just done my program, just skeleton not completely, the final problem has not been solved up to this time.When I run my application, the Icon of its will be showed at TaskTray. I would like the icon is there when I exit fom of application and then If I double click on the Icon, the application will be showed.
View 5 RepliesHow to exit from iframe?.I have a pages called "Master.aspx","Parent.aspx(inside that iframe is there)","Child.aspx".I am calling "Child.aspx" inside "Parent.aspx" page using iframe.If "strBillingAddress1" is null then i need to redirect to page Master.aspx".It is redirecting but showing inside iframe.I dont want this behavior.I need to open as new page itself?This is the code.
If String.IsNullOrEmpty(Session("strBillingAddress1")) Then
Response.Redirect("Master.aspx")
Response.End()
End If
How can i exit a for each statement i mean say i had the code below (not real code its sudo code)
CODE:
but i don't want to exit just this for loop i want to exit the previous for loop at line 1
CODE:
I have the following code which gives me an error at run time. The problem is when TxtSearch.Text - is not an integer a message box should be prompted saying- Only a numeric value is allowed in this field, otherwise continue with the sub.
Private Sub ButtonSearch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ButtonSearch.Click
Dim query As String
[Code].....
The error I receive is showing ''saved_prac = cmd.ExecuteScalar()''..
First it brings the Message box - Only a numeric value is allowed in this field. When I OK it, then it brings another message box "error converting data type varchar to numeric". When you click OK the application crashes...
I have a VB.NET form (CopyScenarioForm) with a OK button (DialogResult property = OK) and also assigned it as 'Accept Button" for the Form.
I show this form from my main Form (mainForm) using
If DialogResult.OK = CopyScenarioForm.ShowDialog() Then
DoSomething()
End if
Now when user clicks on the CopyScenarioForm.OK button, I want to validate his entries and if invalid I want to 'Exit Sub' from the OK button's click handler but when I do that the form still closes out and DoSomething() gets executed. Is there a way to stop this and keep the form alive and only exit if the inputs are valid. I noticed, if I change the OK button's DialogResult property to 'NONE' instead of 'OK' then it doesn't cause it to close. but then how Do I know how the user exited the form to execute DoSomething().
I have been playing with adding labels and text boxs to a form by using code I would like to add a exit button
Private Sub MainForm_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Me.Text = "InputCode"
[Code]....
I have done a lot of searching and cannot find a solution to my problem of, my application appearing in the processes even after exit.
Note: It doesnt appear in the processes due to the type of exit i have used after the click function happens.
Public Class FCAM
Public Sub Launch(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Launch_FCAM_FarCry.Click
Process.Start("....Bin32FarCry.exe", "-MOD:FCAM")
System.Windows.Forms.Application.Exit()
[code]....
I have recently implemented to following code on a good deal of my forms.
Public Overrides Function InitializeLifetimeService() As Object
Return Nothing
End Function
It has worked great to solve some of my odd application hangs when the application has been running > 1 week.However, when the user closes the program I now get an Application Crash screen.how to stop this? how to put it back to "normal" with a global variable?
Public Overrides Function InitializeLifetimeService() As Object
if readytoExit then
' Return... not nothing?[code]......
My application exits sometime without any exception. I am using loop in separate thread to read HID device.
Private Sub USBListenServer()
If (readHandle IsNot Nothing) AndAlso (Not readHandle.IsInvalid) Then
Try
[Code].....
Can anyone tell me what the technical difference is between Application.Exit() and End?Why would you choose to use one over the other, for example?
View 5 Replies