VB 2010 Ultimate Lost Saved File?
Jun 18, 2012
from yesterday night i have done a part of my practical and i saved to my pendrive... the folder name as <Chapter 3>and today i went to college computer lab continue to finish another part and i also saved to my pendrive, since i open the .sln file from pendrive.and i go rename those folder names and .sln name and others possible to rename as <Practical 3>when i back home want continue to do, the folder is still exist but inside folder's files are lost.
View 3 Replies
ADVERTISEMENT
Jun 8, 2009
I just had an absolute nightmare scenario. Somehow while working in VS 2008, the wrong sequence of keystokes occured and I deleted all the controls on my userfom. The form is extensive. I could not undo the deletion and restore my form. So I decided to copy all the code from behind the form to a text file. I then deleted the project and then went to one of my latest back-up copies and dropped it inot my project folder for VS 2008. I opened this back-up file in VS 2008 and simply pasted the entire code from the text file (5,000 lines) into the form. The backup file has the same name as the original.
When I go to run the code, the form loads properly, but none of my control events seem to be firing.There are not any errors showing up in the Error Window. I then started getting an error prompt saying "Project XYZ cannot be modified at this time." Anyways after several attempts, I decided that instead of copying the entire piece of code from my text file, I would only copy pieces that I recall as being updated. Now everything loads properly and the routine runs. But I know have yet another control event not firing. The control exists, the event is there but no firing.Given that I was prudent enough to make back-ups AND I have the actual code from the crashed file how in ____ do I copy this code back into my form and have it work?
View 11 Replies
Mar 7, 2012
Is it ok to install my VS 2010 Ultimate even if I already have VB 2010 Express Edition? or should I uninstall the express edition first?
View 3 Replies
Jun 14, 2010
i have tabcontrol1 and has 7 tabs and 1 button i want that button to recognize the active tab and do something.. else if anothor tab is active do something else... and so on i searched the net but i couldnt find what i am looking for
View 4 Replies
Jan 24, 2012
I'm running Windows 7 Pro and am trying to install Visual Studio 2010 Ultimate from a zip drive. When I double-click on the "setup.exe" app, I get the following popup errors (see attached screenshots).
I would think there would be no compatability issues but that's just me!
View 11 Replies
Apr 13, 2009
I am creating a simple button based rpg and was wondering if someone could help me with 3 things how to hold information within the game until the player save's the game, Saving the game, and Loading the game.I want the saved games to be saved onto a encryted file like .db or .dat file..
View 3 Replies
Aug 1, 2011
I am about to publish my program and I need IIS for Visual Studio 2010 Ultimate, does anyone where to get it.
View 3 Replies
Apr 26, 2010
I have a program I am trying to create in Visual Studio 2010 Ultimate, and have a few questions as to whether what I would like the program to do is even possible - Here is the idea of my program:
I have a main form with a ComboBox1, Pic1, ImageList1, and Label1 - In my ComboBox I have 118 entries, and 118 corresponding Images in the ImageList control - Right now I have it set to show the Image from the ImageList when a ComboBox1 entry is clicked, by the Index number:
If ComboBox1.SelectedIndex <> -1 Then
Pic1.Image = ImageList1.Images(ComboBox1.SelectedIndex)
Else
Pic1.Image = Nothing
End If
What I want to know is, Can I make it so I can add/update entries in the ComboBox1 and ImageList1 at runtime? Such as, have an 'Open' dialog to import the Image I want to add, and a simple InputBox to add to the Combo1 list? Also, if this IS possible, if I add Items at runtime, won't it mess up my Indexes, and then the correct Images from the ImageList1 won't be the ones that show?
I know, lot of questions, but I am trying to cleanse my mind of VB6, and focus on .NET - More complicated, but I like the appearance of the finished programs much better, without stupid additional OCX's
View 2 Replies
Jun 12, 2012
Apparently Crystal Reports doesn't come with VS 2010 Ultimate like I thought it did. When I went to create a new report, I got prompted to download it free and install it. Then, after installing it, I tried to recreate a report and got the same prompt to download it again.
View 2 Replies
Jan 24, 2012
I have been using the VB IDE for many months on a VB6 translation to vb.net 2010. I have had no troubles building and running in debug,until the message below just appeared. This now prevents me from running in debug. I have not used Publish in the Build menu or used ClickOnce. The Project - application page has "enable XP visual styles" checked. I do not want this unchecked, which will remove the error message below.
The error message is:
Error 2 Could not find file 'Microsoft.Windows.Common-Controls, Version=6.0.0.0, Culture=*, PublicKeyToken=6595b
[code].....
View 18 Replies
Oct 24, 2010
Installed DirectX11 June 10 SDK on Win7 machine with VS2010 Ultimate. Project written in Visual Basic, targeting .net 2.0. Just need the directx audio player capability.
Tried to add reference to the SDK Developer Runtime Files.
Nothing from DirectX11 shows up in the add reference COM for the project.
I can't seem to make my project see or accept the DirectX11 .dll's.
Unclear of which one I need other than maybe XAudio2 (I think) to play a .wav file.
DirectX11 SDK Release Notes say's the following but I don't understand it.
MS says VC++ directories are depricated.
[Code]...
View 3 Replies
Mar 16, 2011
OK, So I am making a program in Visual Studio 2010 Ultimate. I have gotten all the forms and everything correct. Except the text color. I need to make it so when they reach the end and it says if they got it right or not, that the program changes the textbox's text color. The code I currently have is when form2 = the first word in the spelling test. Form2.textbox1 is the first place where the user puts the answer. Form1.Textbox1 is where the user puts the original word.
Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged
If Form1.TextBox1.Text = Form2.TextBox1.Text Then
TextBox1.ForeColor = Color.Green
Else
[Code]...
This code does nothing and there is no errors. P.S. If you need a copy of the program, you can download the solution here: [URL]...
View 6 Replies
Dec 12, 2010
I am a visual basic developer and I use Microsoft Visual Studio 2010 Ultimate Edition. I've been making applications that can play only in my PC because it requires .NET Framework 4, which is not installed at even Windows 7 nor Windows Vista nor Xp. So, I decided to use Visual Studio 2008 which uses .NET Framework 3.5 SPI. It still doesn't run in common PCs. I believe it is pointless building applications that can perform only on programers' PCs. Is there any way to avoid using 4 or including it for the installation. I also downloaded .Net Framework 4.0 from this location [URL].. on a XP computer and my app couldn't perform because it was 3.5 SPI.
View 5 Replies
Apr 3, 2012
how can i add ribbon control in my visual studio 2010 ultimate toolbar , i m used vb.net and i have also try download ribbon for wpf and install it and right click on toolbar chose item and in wpf tab i select ribbon but its not working and i cant find the ribbon control.
View 3 Replies
Aug 14, 2010
I'm trying to code some programs and i want to use something called " (its in the dialog menu) FileOpen.dialog" i think thats what its called. Anyway i was seeing that if i just clicked on the OpenFile dialog it wouldn't open the file. So i knew i needed a code. I just dont want the OpenFile dialog i was just using that for example.
View 6 Replies
Aug 18, 2011
I must be loosing my mind! I came back to working on a small project after not being able to work on it for some time and now the IDE layout is totally different. For instance, there used to be a toolbar that showed a run button, step into, step over and such but now its not there, and, for the life of me I can't find it! I went to reseting the layout options to default, VB and so forth but cannot find it. In addition, when I hit F5 nothing happens. I can't figure out how to run my project from the IDE. Have I lost my mind or what?
View 2 Replies
Feb 23, 2011
I have set up a form that will act as my parent (this hasnt been set up as an MDI).On this form I have a Panel that I will be loading forms into. I have a form that contains a DGV. On the load of the parent form, I then load this "child" form into the Panel. In the onLoad event of the "child" I go off to the database and populate my DGV. Then I run through the rows in the DGV and add in a logo image in the first column and change some cell colors based on values in those cells.
This all works great, however, when the child form finishes loading all the changes are lost. eg The logo images go back to the red cross and the cell coloring is gone.If I call Me.Refresh() in the child window as the last line in its Form_load event I can see the logo and cell colors update to what I want, but as soon as it has updated, its like it immediately refreshes again and all the changes are gone.
View 1 Replies
Feb 12, 2011
Got a new one...
Private Sub Form3_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles MyBase.KeyDown
e.SuppressKeyPress = True 'makes it quit dinging when press enter
[code].....
View 2 Replies
Jul 16, 2011
it's just for a program registration. i would store all of the registration codes in the access database, then export it to XML, then upload it to my web host. I would then somehow connect it to my Visual Basics login form (Which I have already made). If this can't be done, having them register through the form and having all the allowed codes on the internet (So i can easily edit them)!
View 5 Replies
Jul 14, 2009
I have an asp.net/vb file that receives data and processes it via a stored procedure. The code had the width set to 2 for the year's varchar, so it was chopped, leaving only the first two digits to get inserted into the db.Is this info possibly retrievable from a system/IIS log file or is it lost forever?
View 3 Replies
Dec 29, 2008
When i added a 2nd openfiledialog i lost the file list in both dialogs I deleted both file dialogs, added another openfiledialog and coded it the same as the first dialog was previously. now the openfiledialog and the savefiledialog does not show any file list. But when i start to type in the file name box a list of the files that are in the folder appear . if i click on one of them files and click open the image file will properly go into the picture box in the program. Here is the code for the open file dialog
[Code]...
View 8 Replies
May 30, 2011
I decided on a comma separated data file, saved as a text file. This is for data that will not change. After loading the data from the text file; then throughout the lifetime of the program the data can change. The data can then be saved back to a different binary file. The idea is to have a save state system going.Does anyone have a suggestion or is opposed to the idea. Is there a simpler way to organize something like this?
View 6 Replies
Apr 4, 2010
[code]...
I am currently using this last part to save a bitmap I created.This works, however, by saving it in the .exe directory.How would I specify an address for my .bmp to be saved..or better yet, how could I use a SavefileDialog or BrowseFileDialog to specify an address?
View 2 Replies
Jan 1, 2012
Are My.Settings values saved in the program itself or do they get stored in the registry? o, for example, if I set a My.Settings value with a program, then I copy the program itself to another PC - is the My.Settings value still set?
View 3 Replies
Feb 17, 2011
I am using VS 2010 and Access 2010 and in a table I have a Primary Key called Counter which is an Autonumber.When I save a record I need to be able to access the value of the counter field for the new record. When I try and access the field I get a value of zero.I can see the value in Access but I cannot set it in Vb.Net. I have set the fields and then
[Code]...
View 6 Replies
Jul 6, 2009
I am running vb.net in visual studio 2005 and i am fairly new to it all, whilst trying to create a windows application i have lost the .vbproj file and am only left with the .vb code that has been created whilst i have been using the toolbox to create the application graphically. Is there anyway for me to recover the .vbproj file without having to redo the whole thing?
View 3 Replies
Jul 27, 2010
I'm using this code to update my access database.
[Code]...
If i run the program in debugmode and then do a update it will be saved to the database.(must stop and run again to see the update. How to se the update directly?)
My main problem is that if a build the program and run it outside VS then update never being saved. How can i solve this. I tried using "commit"(maybe totaly wrong) but that didnt work.
View 1 Replies
Oct 12, 2010
the software im currently creating requires that a loaded powerpoint slideshow be automatically saved as a powerpoint show file (without actually creating a pps file).
View 1 Replies
Apr 24, 2009
i have this app. with a listbox , a save button, and 2 textboxes the listbox loads all the files in a folder that i save directly from my save button it automatically loads up the files when i click on a listing in the listbox, text1 is the file name, text2 the content.i want to be able to have the listbox highlight the new saved file name in the listbox once i save the file in order to show that the file was created and such.
View 5 Replies
Jul 1, 2012
I am trying to copy a file from one location to other by clicking on a link label.the original file is saved at "D:\New Folder\" and the complete address of the file is stored on the link label.whenever i click on the click label, a form appears with three button Open, Save as, and cancel file is opening normally but when i click on save as , save as dialog box appears normally, but after entering the file name when i click on save button, file is saved on the destination but without any extension.
Here is the code...
ext1 = System.IO.Path.GetExtension(LinkLabel3.Text)
saveFile1.DefaultExt = ext1
saveFile1.Filter = ext1 + "All Files|"
If (saveFile1.ShowDialog() = System.Windows.Forms.DialogResult.OK) And (saveFile1.FileName.Length) > 0 Then
System.IO.File.Copy(Form3.LinkLabel1.Text, saveFile1.FileName.ToString)
End If
View 2 Replies
