Well I know this could work for a browser with no tabs:
Private Sub WebBrowser1_DocumentCompleted(ByVal sender As System.Object, ByVal e As System.Windows.Forms.WebBrowserDocumentCompletedEventArgs) Handles WebBrowser1.DocumentCompleted
End Sub
But the thing is, I do have a tabbed browser. I tried this code, But it didn't work.
[Code]....
How can I tell if my app's web browser or the user's default browser has completed loading the page?
View 6 RepliesI've made a tabbed web browser and I'm using
CType(TabControl1.SelectedTab.Controls.Item(0), WebBrowser).Stop()
instead of WebBrowser1.Stop() for navigating.
but I want to know when a web page has finished loading?
Normally the following works, but not with tabs
Private Sub WebBrowser1_DocumentCompleted(ByVal sender As Object, ByVal e As System.Windows.Forms.WebBrowserDocumentCompletedEventArgs) Handles WebBrowser1.DocumentCompleted
End Sub
how to cause it so that my program will not proceed while a web page is loading. For example, if I use this:
webbrowser1.navigate(www.amazon.com")
sometimes it will have finished loading the webpage before the program proceeds. Other times, even if it says it is done, it is not done and it causes my program to crash.
how I can cause my program to stop and wait until it is sure the webbrowser has completed loading?
Is their a syntax to tell if the webbrowser has finished loading?
View 8 RepliesI typically write my own servers, javascript, etc in vi. I've been given a project to enhance a VB.Net / ASP.Net application and I'm having some troubles figuring out how to get the user control to render BEFORE the page finishes loading.When I use normal browser as the viewer, everything works OK. When I try to use generate the page as a report, the report generator spits out the PDF while my JavaScript graph drawing stuff is still in it's initialize functions.They are using EvoPDF as the PDF generator. It appears the page is being considered complete after the page is loaded but before the javascript is executed.I admit I'm a bit lost when it comes to ASP.NET, but I know HTML/HTTP/JavaScript very well.How can I force the page load to wait until my usercontrol finishes rendering?
View 2 RepliesFirst off the Treelist does not display data until it is almost finished loading the files. I tried to refresh the treelist but it still does the same.
Private Sub BtnBrowse_Click(sender As System.Object, e As System.EventArgs) Handles BtnBrowse.Click
Try
If FolderBrowserDialog1.ShowDialog() = Windows.Forms.DialogResult.OK Then
' List files in the folder.
[Code] .....
I've got a webbrowser. It's prettey advanced, given that I've spent quite a lot of time coding it, and here is my code which will get the Favicon of the current website when a the webbrowser has finished navigating:
frmBrowser.BrowserTabs.SelectedTab.Icon = Controller.GetFavicon(Me.Url.Host & "/favicon.ico")
Sometimes, a user has switched tabs before the webbrowser has finished navigating. So my question is: Is there any way in which I can determine what tab the favicon belongs to and set it to that tab, rather than just setting the favicon to the selected tab?
Intended use of program:
1. User enters 1-3 websites they wish to monitor
2. User clicks go next to textbox with data entered, then button and a copy of form refered to as browse is created.
3. Form refered to as browse is directed to the url refered to on the form refered to as monitor, in the associated textbox(passed as a parameter to copyForm)
4. A timer is used to refresh the webpage every 10 seconds
What I wanted to happen was the program turn the associated picturebox in form1 green if page is loaded, and black is loading.
[Code]...
1. I want to load pages in web browser without loading scripts and Pictures(Jpeg,gif,png).
2. When Web Page Loads my Application Stops Responding. After that it responds. In one place of my Code i have added thread.sleep(10000). is it reason for that?
how do I create a label that when clicked by the user, it will open a website using the default browser. I have seen the control LinkLabel but I do not know how it works or how to use it.
View 3 RepliesI need my problem to check if internet explorer 8 is running a website.I'll be more specific. When internet explorer 8 navigates to [URL], an event should be triggered, like pressing a button.The "If" statement is ofcorse needed.
View 4 RepliesI want to check for a website if its online or not
I want something like below if www.mysite.com is offline then
MsgBox(Offline)Else MsgBox(Online)End If
I know all about File.Exists in VB. I know that it should work, but in my situation, it is not. Currently our site builds an image string based on the user id, then goes to our image folder on the server and retrieves it. If the image doesn't exist, it displays the broken image icon. I tried implementing the File.Exists method using the path and image name it was already using to pull the file. Even if the file exists, if returns false. I have read other posts saying that it could be a security issue, but it seems to me that if it can pull the image, it should be able to check and see if it exists. [Code]
View 1 RepliesI am trying to create a small application that will tell me if a website is up and running. This application will monitor if the site goes down. The problem is that there are several websites sharing the same IP address, and I cannot use ping to monitor it for the same reason. I do not know what type of code can I use to query the availability of the website. I read about webRequest and webResponse but I do not know how to get the response information that will tell me if the site is up or down. The code should be able to tell if a site like "mundo.reporters.com is accessible. That is the only thing.information to point to a potential solution will be more than welcomed.
The server is hosting 8 websites that share the same ip address, and I need to constantly monitor if they are functional.
I have a form which asks for a username and password to connect to a MySQL database. Before I load the login form I would like to place a check to see if the connection information is stored in the My.Settings.<connection string..I am using Sub New() in the Form.Designer to do this by placing the following [code]The connection form does show but when i close the form there is a blank form that shows up.
View 3 RepliesDue to the July 13 end of life support for IE6 minus SP3, I am planning on checking the build version of the browser once logging in. I am able to return the browser major and minor versions but cannot find a way to get to the build/patch version which tells what SP the user has. I need to confirm the user is using an IE version higher than 6.00.2900.5512.
View 9 RepliesHow would I go about checking if a control (in this case a textbox) is selected? I have searched Google as well as gone through all of the possible functions and still found nothing. I know it's relatively easy as I've seen it done before but I can't remember how.
View 3 RepliesMy code follows. I have six items (indices 0-6) and I'm trying to check if one has been selected or not. If not, then messagebox yells at you to select one. If it does, it tells you what you have selected. I'm having a horrible brain fart and contemplated coming here for about 45 minutes as I couldn't get it.
If ListBox1.SelectedItem.ToString <> "" Then
MessageBox.Show("You selected " + ListBox1.SelectedItem.ToString)
Else
MessageBox.Show("Please select an item.")
End If
I have a CheckBoxList where one of the options includes a textbox to fill in your own value. So I need to have that textbox become enabled when its checkbox (a ListItem in the CheckBoxList) is checked.This is the code behind, I'm not sure what to put in my If statement to test if that certain ListItem is checked.
Protected Sub CheckBoxList1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CheckBoxList1.SelectedIndexChanged
If ___ Then[code]......
I have a test Listview with four rows. In the code below when I start at the top and check each row the textbox is populated with the selected value. When I randomly check a row the correct value (checked row) does not consistently populate.
Private Sub lvwInjuredWorker_ItemCheck(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ItemCheckEventArgs) Handles lvwInjuredWorker.ItemCheck
If lvwInjuredWorker.Items.Count > 0 Then
For Each lvitem As ListViewItem In Me.lvwInjuredWorker.Items
[Code] .....
I have a tabControl with some tabPages on it.What i want to do is i need to perform an action based on the currently selected tabpage.I have this code but it is still not working[CODE].......
View 2 RepliesI'm currently trying to teach myself VB. I'm trying to automate a web-browser to go to a certain website. I wish to place the script on my desktop. But I keep getting syntax error 800A03EA. Here's my code.
'webbrowser.vbs'
WScript.CreateObject(' "InternetExplorer.Application" "IE_" ' )
ie.Visible = true
ie.navigate("www.google.com")
Could you give me an example of how to make a website?Remember, I was trying to make my business in the future.I will accept the codes if you can give me an example of how to make a website.
View 4 RepliesI'm trying to load a specific game (Kingdoms at war, www.kingdomsatwar.com) into a web browser on my visual basic 2010 project (i dont mind if its a webbrowser, AxWebbrowser or Axshockwaveflash, it just needs to be in my form).
To answer this question you may need to go the extra mile and join the game to try what im asking Ok so details:
I have a few issues when trying this, I create a form with a standard web browser and change the url to www.kingdomsatwar.com , when it runs it will go to the website however when clicking the login button it will go to a black screen with a bit of writing cut off in the top left corner (which i found out was "Page Loaded"), so thats the first issue.
However this can be temporarily fixed by right clicking and going to "forward" or "play". After this you will go to a login screen where you can enter your details, however after this it will load the game with a "cannot connect security" (which may be a game issue, however i need to know how to make the vbwebbrowser work like internet explorer, which will load it).
This game runs in flash, so i need to know if there is any special way to make the vbwebbrowser work properly like the internet explorer version works with the game.
I tried running the game's url itself (using mochigames), which is http:games.mochiad.../play.swf?q=243 , (i have tried this in the vbwebrowser, axwebbrowser and axshockaveflash) and they all won't load the game (they will load the game when not logged in but wont load an account)
I know this is a very specific question and can probably not be solved but if anyone has some spare time, could they create an account and give it a shot. All i need is a form which will load a www.kingdomsatwar.com account on it.
How do i checked that within a GroupBox 1 radio button has been selected? I want to provide the user with a message box telling them they have not made a selection from one of the 12 radiobuttons within the group box?
View 3 RepliesI have this url as an example: [URL] As one can see, it returns a nice picture--just what I need. Now, I need to put that "picture" inside a picture box or perhaps save it to a file. I would prefer the first as I believe it would be faster. Note the picture comes to us in a .gif format. I use vb 2005.
View 4 RepliesWell i hate Web browser, sometimes I use this code to check if the document completed and it stops there for ever.
PHP
While MyBrowser.ReadyState <> WebBrowserReadyState.Complete Application.DoEvents() End While
Sometimes it stops on that code and I don't know why!!!So is there any other method to read a text from a website, or if the code i am using is wrong, whats the right one ? I use this code to check if the document completed loading.
I am building an desktop app. In which I have to use a web browser. (with url: facebook.com) but I have a problem. This website runs in regular browser smoothly but in application it halts the computer and on and off I think it is due to heavy use of memory.
View 7 RepliesHow do I make an if statement that would check if the user has selected an option from the select list named cboGrade and also to check if the user has selected a radio button from the group named gbCalcType? I have an action that is carried out when a button is clicked, but before that action is carried out, I need to check the above.
I have this so far:
If rbPlus.Checked Or rbMinus.Checked Or rbMultiply.Checked Or rbDivide.Checked Then
instructions are here
End If
This checks that one of the radio buttons are selected. How do i check that an option is selected from the option list? There are three options: 3rd, 4th, and 5th. And the text starts out saying Select One and it locks the control once they choose one.