I've recently learned a new trick. I never realized you could write a sub and then handle multiple controls' events right in the sub.instead of handling each controls click event, for example.
[Code]...
The event handlers in my parent class are never called though the events are raised in the child class.
The Code:
Public Class childForm
Public Event checkboxchangedEvent(ByVal checkbox1 As Boolean, ByVal checkbox2 As Boolean)
Private Sub checkboxchanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged, CheckBox2.CheckedChanged
[code]....
I am having issues with a user created event being detected by the event handler. This program is in VB.net, defined in an OO way, and there are several other classes that implement the same interface and their class instances all detect the appropriate Event, except for one.
The following code is the base class:
Public Class CommandSpeedTest Implements testInterface
Private SpeedTest As New ArrayList()
Public Event testComplete(ByVal test As IEnumerable) Implements
[Code]...
This exact structure is being applied to three other classes (all of which are instanced using WithEvents in class gui) and being cuaght correctly.
Single stepping through code just executes the RaiseEvent line and goes to the next. It should jump to the event handler and execute the code there.
How do I get a Event Handler to fire from within a nother Event Handler?
View 6 RepliesCan someone help me with the code for an Event Handler for colorAnimation in VB.net. All I get so far is code in c#, which I do not follow very well. Please also show how to call or raise it from a control e.g. a button.
View 8 RepliesHow can i add one more parameter in System Events for ex : I want to add a parameter in Button Click Event.
View 5 Repliesif you have this in your Application events: Private Sub MyApplication_UnhandledException(ByVal sender As Object, ByVal e As Microsoft.VisualBasic.ApplicationServices.UnhandledExceptionEventArgs) _ Handles Me.UnhandledException 'test to make ceratin handlers both fire Debug.WriteLine("AppEventFired") End Sub nd to test it you do this
Throw New Exception("1") shouldn't the Debug.WriteLine("AppEventFired") line execute? It isn't that I can tell and I have checked that I am running in Debug, not Release.
Perhaps surprisingly I haven't added an event handler programatically before and I'm having trouble getting my head around AddHandler.I am creating a series of DataGridView controls in a loop and want to subscribe to the CellFormatting event on each of them.The event handler signature is as follows;Private Sub ConfigureRows(ByVal sender As System.Object, yVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs)This works fine when I enter it in the visual editor properties box but I can't figure out how to give it the correct arguments using AddHandler.
View 2 RepliesI have this code
If e.KeyCode = Keys.D0 Or e.KeyCode = Keys.D1 Or e.KeyCode = Keys.D2 Or e.KeyCode = Keys.D3 Or e.KeyCode = Keys.D4 Or e.KeyCode = Keys.D5 Or e.KeyCode = Keys.D6 Or e.KeyCode = Keys.D7 Or e.KeyCode = Keys.D8 Or e.KeyCode = Keys.D9 Or e.KeyCode = Keys.Oemplus Then
[Code]....
The output WILL be 189 when I press the - sign. But when I check "Keys.OemMinus" it stands for 189 and when I replace "Keys.OemMinus" with 189 it won't work either!
I checked the Resources file and it's correct. The picture just doesnt change, only shows the last pressed button...
Simply stated, I want to call the Panel1_Paint event handler from the Button1_Click event. Is this possible? If so, How? IE: Click the button and it paints the panel.
View 6 RepliesI have a simple, but important question: How can I raise events of my form1 on another module/form?My form tempalte is crowded with events (50 of them contextmenustrip events)How can I place those events on another form/module to clean it up a little?
View 7 RepliesWith reference to my previous thread on Paint event handler.. [URL] I went to read up more on Paint Event Handler.. I have a button which draw out a path based on the user selection.. Below contains the drawing of the path portion of the button click event code
[Code]...
However It did not activate the paint event when I clicked on the button.. Instead, the paint event still activate even before I click on the button? So can anyone teach me on how to activate the paint event when I click on a button?
remove an event handler from within the event handler?
I have a class that gets data from a hand scanner. When the scan is complete and the data is validated, the class fires a custom "ScanComplete" event and returns the data in a custom EventArgs.
In the calling program, I'm creating an instance of the scanning class and adding a handler for the "ScanComplete" event. In the event handler I get the data that was scanned and then remove the handler.
It seems to be working but it feels wrong to remove the handler while I'm running inside the handler. Will this cause a problem?
I am teaching myself VB, and when I try to run this program, I am getting "An error occurred creating the form. See Exception.InnerException for details. The error is: Object reference not set to an instance of an object." If I was to declare the variables inside each event handler, the program runs, but why won't it run when I make the scope public? Seems repititous having to declare the variables in every event handler. [code]
View 7 RepliesI'm trying to complete this airline reservation application, but having a problem in this part of the question:Creat an event handler for the FlightBindingSource's PositionChanged event: select FlightBindingSource in the class Name combobox then select position changed in method name combobox to creat the FlightBindingSource's PositionChanged event handler. Write a code to access the currently displayed flight object and pass its flightNumber to method DisplayPassengers as a decimal.This Is my code so far:
HTML
Public Class AirlineReservationForm
Private database As New ReservationsDataClassesDataContext()
Private Sub FillAll()[code].....
Below I create an array of labels. I would like to add an click event to my labels. Can someone point me in a direction?
[Code]...
When I utilize AddHandler in VB to add my own method to the Click event :
AddHandler Button.Click, AddressOf myButton_Click
I see that my code executes last - after other event handlers for the Button_Click event. Is there a way to insert my event handler in front of other events so that it executes first?
Is there a way to attach a Sub or Function to an event of many controls at once?For instance, to clear a bound combobox I use this routine on the KeyDown event of the combobox:
VB
Private Sub MyComboBox_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles cboID.KeyDown If e.KeyCode = Keys.Delete Then sender.SelectedIndex = -1 End IfEnd Sub
But if I have many comboboxes, I have to copy the same routine over and over to all of them...Is there a way to attach the routine to the KeyDown event of all comboboxes?
Pseudocode example:
VB
Sub AttachEventOnKeyDown For Each ctl As Control In Me.Controls If TypeOf (ctl) Is ComboBox Then ' On ctl.KeyDown execute "MyDeleteRoutine(ctl)" End If NextEnd Sub
How can this be done?
I am using sockets to send message between computers. I send the messages alright. What I want is when the message "x0x" comes, the client must be closed within 5 minutes. Teh admin can cancel the request by sending message "-xx" as well. The routine that checks for incoming connections and accepts messages uses WHILE TRUE...END WHILE since it must always listen. Once I get a message, I need to fire a timer control or other that fires within 5 minutes. But the program cant leave the WHILE TRUE at all. If i exit it early, the timer fires and the program does get exit. How do I fire the timer or other routine while still the WHILE TRUE routine checks for incomin connections and messages?
View 5 Repliesis there any way to reference a particular code routine in VB.net external to the current loop/routine?Example:
If Var01 < 5
[Routine A]
Else
[Routine B]
End If
where Routine A and Routine B are code sequences at the end of the entire program -- such as outside of the current sub or class? The idea would be to reference an otherwise repetitive code.
In my windows application, I want to check which part of code (or routine) has caused un-handled exception event to occur from application events in its running mode (not debugging).
If this is possible then please guide me how to do this.
If any clarification regarding this is required,
First, I launch a website in Internet Explorer from VB.net and automatically login the user with ther username and password. As soon as the username and password fields are automated, I send "enter" to the website so it goes to the next website. This part works perfectly. However, my problem is that i want to send a mouse click event, which i have already written, to click a hyperlink on the next website page. I tried a few different things, none of which worked. My program is automatically logging in the user and doing the mouse click event at the same time. I have tried to use the "sleep" command, but the mouse click event is still not executing after the second webpage loads. I have tried using nesting "If, then" statements and that has not worked either. Does anyone know how to make sure the webpage fully loads before executing a sendkeys routine or a mouse click event? This is my code thus far:
If (Search.ComboBox1.Text = "IWR") Then
BlockInput(True)'this disables the mouse and keyboard
Dim IE As New Object
[code].....
There are no errors, everything is just executing all at once instead of letting the second webpage load and then executing the mouse click event.
Is it possible to determine using VB.NET whether a certain event has any handlers attached to it? I don't own the event, in this particular case I want to know which of the items in a Windows.Forms.MenuStrip have their ToolstripMenuItem.Click event handled.
View 1 RepliesI've been looking for a solution to this for several hours now and cannot find a solution.
The Scenario:I have a masterpage baseclass (called basemaster)All of my master pages inherit from basemaster
basemaster defines an event 'Public Event HandleClickEvent As EventHandler'I have a masterpage named master1
master1 defines an event handler 'Public Shadows Event HandleClickEvent As EventHandler'master1 has a user control named usr1 usr1 has a button that raises event ButtonClicked when clicked I have a page (thePage) that uses master1 thePage has a button click event handler that it registers like so: 'AddHandler Master.HandleClickEvent, AddressOf HandleTheClick' master1 has code something like:
Protected Sub Usr1_ButtonClicked(ByVal sender As Object, ByVal e As System.EventArgs) Handles Usr1.ButtonClicked RaiseEvent HandleClickEvent(sender, e) End Sub when thePage loads I see it register the handler on master1 when the button is clicked, Usr1_ButtonClicked is fired and I step through the RaiseEvent but HandleClickEvent on thePage is never reached.
This code is part of AjaxControlToolkitSampleSite. To be exact, it is in the AsyncFileUpload control[code]...
View 4 Replieshow to add one event handler name clearallboxes that handles the TextChanged event for both examples(Customer text box and Total text box ) This event handler should clear the values in the text boxes that display the results.
View 4 Repliesi have a page which dynanically create a link when it load, after i click on the link it should loop in the database fetch all the record and display another set of link , then when i click on these link it should give me all information about this particular record it like this one
Q: when the page loads, it creates the first link which is associated with an event handler, it fire the first event handler (Getname) but it not firing the second event handler (GetnameDetails)
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If ViewState.Item("nameload") IsNot Nothing Then
If ViewState.Item("nameload").ToString = "True" Then
[Code]....
I have a form that is derived from a base class. When the form is created a behavior class is also generated that handles event management, bindings, etc...I create a form instance(FormFoo). When the associated behavior class is created it has a method in it with a signature of: grid_EventA(....) Handles grid.eventA
I want to handle EventA in FormFoo instead of the behavior class so I remove the handler that was generated in the behavior class and add a handler that points to a method in FormFoo. This all works just peachy. The event is properly handled in FormFoo only.
Next I instantiate a modal form(FormBar) via a button click in FormFoo. I then close FormBar. Now we have a problem.When eventA fires it is now handled from the Event handler in FormFoo AND in the behavior class associated with form foo(bad).Is the event handler in the behavior class(grid_EventA(....) Handles grid.eventA) getting resubscribed when the form gets focus again? I don't understand how that event is getting resubscribed.
I figured it out I removed the Handles grid.EventA from the method signature:
grid_EventA(....) Handles grid.eventA
Then I added the handler during initialization of the BehaviorClass using:
AddHandler grid.EventA, AddressOf grid_EventA
Once I did that the problem went away. It appears that when you use MethodName(..) Handles that the event bindings get reset when the control comes back into focus.
In C# I can test for this...
public event EventHandler Trigger;
protected void OnTrigger(EventArgs e)
{
[Code]....
Is there a way to do this in VB.NET? Test for null I mean?
MORE INFO
I forgot to mention. I have classes written in C# but I am writing my unit tests in VB.NET.
I am trying this in the unit test...
If myObject.Trigger IsNot Nothing Then
''#do something
End If
This is causing a compile time error which says ... "Public Event Trigger is an Event and cannot be called directly. Use the RaiseEvent statement to raise an event."
I am trying to convert this code written in C# to VB:[code]This is what I have currently, but it always throws an error when I run it:[code]
View 3 Replies