I'm trying to create a recordset with 4 fields. So I created the recordset as: Dim rs As New ADODB.Recordset..I am new to VB .net and I dont know how to define the four fields in rs.
View 2 RepliesThe field's names of hashtable are same of fields adodb.recordsetHow can i import the fields value of hashtable in fields adodb.recordset without do it manually?[code]....
View 1 RepliesI am developing an application on VB2008 with MySql as database. I opened the connection without any errors. I have three fields/columns in my database and on the form. When I am running vb form data is not reflecting on to form fields.
I have written the following code in form load event.
'Dim cn As ADODB.Connection
'Dim rs As New ADODB.Recordset
'cn = New ADODB.Connection
'cn.ConnectionString = "DRIVER={MySQL ODBC 3.51 Driver};" + "SERVER=localhost;" + "DATABASE=in_out;" + "UID=root;" + "PASSWORD=pacvision;" + "OPTION=3;"
'cn.Open()
'MessageBox.Show("Connection Opened Successfully")
'rs.Open("Select * from deptno", cn.ConnectionString, ADODB.CursorTypeEnum.adOpenKeyset, ADODB.LockTypeEnum.adLockOptimistic)
I got a DataGrid Control that uses an Adodb.Recordset as a data source. I'd like to change the data type of the dodb.Recordset.Fields at run time. PS:I tried use the Type property but I got a message that it can't perform the operation when the object is open. Then I tried closing it with Close() but then it says the field is not available.
View 4 RepliesI have some code from this site CodeProjectLink to convert a datatable to a recordset. This code had been working fine until I changed to .NET 4 (was previously 2), now when I call the following line:
Dim result As New ADODB.Recordset()
result.CursorLocation = ADODB.CursorLocationEnum.adUseClient
Dim resultFields As ADODB.Fields = result.Fields
Dim inColumns As System.Data.DataColumnCollection = inTable.Columns
For Each inColumn As DataColumn In inColumns
[Code] .....
I tried changing my line to just:
resultFields.Append(inColumn.ColumnName, TranslateType(inColumn.DataType))
But this gave the same error. The TranslateType function is correctly returning ADODB.DataTypeEnum.adVarChar so this seems valid as well
I have some code from this site CodeProjectLink to convert a datatable to a recordset. This code had been working fine until I changed to .NET 4 (was previously 2), now when I call the following line:
Dim result As New ADODB.Recordset()
result.CursorLocation = ADODB.CursorLocationEnum.adUseClient
Dim resultFields As ADODB.Fields = result.Fields
[code].....
create code for my further reference and analysis.
[Code].....
moved to .net forum. :Moved to .Net forum. VB6 forum is for VB6, not .Net
I migrate a project from vb 6.0 to vb.net 2008.
[Code]...
recordset.AddNew()
recordset("Filenumber") = arrText(0)
recordset("ClientName") = arrText(1)
[code].....
I would like to define a class as something like a constant, and use the class directly rather than having to always create an instance. Is this possible? I've tried a handful of combinations of syntax, but nothing I've tried lets me do what I'm after. To give an idea of what I'm after:
[Code]...
How do you change an ADODB recordset to ADO.Net recordset?
View 4 RepliesI just do not understand the combo box theory when you need to define the selectedvalue in a datagridview combo box. anyone have a working example? JMC had a lot of definition in other posts but.. i just did not grasp it. This combo box is in DataGridView1
[Code]...
How can i call sqlserver 2008 user define function in vb.net?
View 1 RepliesI downloaded HWID Which lets me create lock to pc for my app Original source works but when i try and add that to my app it dosent m i Missing something ?This is the code
Imports System.Net
Imports System.Management
Public Class Form1
[code]....
I coppyed original source as u see above to my form3 which will be loading screen but some reason I get errors above code is exacly the same?
1 - Need to create a kind of composite property, like the font property, that it's showed with a plus sign to expand. For example i need to define a new pen, i need to define the color and the width... 2 - I need to define the color for one brush, but if i create a property of the type brush in the PropertyGrid it appears like "System.Drawing.SolidBrush"
View 2 RepliesI have created a User Control (UC) where user type the information it needed and save it ti MS SQL Database and also have created a User Control dedicated for it's button, since my main form has split container and has two panels, one for UC which contain the button only and the other one for my Main UC where user enter the information.I created a Module that contain the function on adding the data type in UC Main to the database.
[Code]...
on My UCButton named "Save" I just call the function AddUserInformation. But the problem is the variable where it bind to the ucUserControlMain textbox remains Blank, When i query the my database table, only the UserInforID and the DateAdded has been updated and the other column remains blank where the variable get it in the UCMain Textbox...
I'm currently refactoring an old Visual Basic DLL (VB.Net), which stores all of its data in one module called Globaldefinitions as public fields. There are about 200 fields, referenced thousands of times all around the code:
Public Module Globaldefinitons
Public a As Short
...
Public zz10 As Double
[Code]...
I need to change the module into a class with non-shared fields. This means, each and every of these thousands of references needs to reference the instance of that class:
globalDefinitionsInstance.a = 5
How do I go about this efficiently?
Regular expressions operating on the source fall flat. Refactoring tools like Re-Sharper or CodeRush don't seem to offer this functionality. Visual Studio 2010 cannot do it automatically either.
Class Foo
ReadOnly name As String
Public Sub New(name As String, dependentUpon As Foo)
Me.name = name
[code]....
The output of New Bar() is:
Dependent created. Dependent upon nothing.
Independent created. Dependent upon nothing.
It seems fields are initialized in the same order as they appear in the source code, which (a) leads to an unexpected result, and (b) seems a little puzzling, given that one is normally not permitted to read from uninitialized variables in .NET, yet that seems to be working fine above.I would've expected VB.NET to be smart enough to initialize referenced fields first, and only then those that reference it; i.e. I'd have liked to see this output instead:
Independent created. Dependent upon nothing.
Dependent created. Dependent upon Independent.
how to get VB.NET to behave like that instead, without simply having to swap the declaration order of dependent and independent inside class Bar?
I'm trying to create a table in Word using data from a table in Access. There are four fields in the access table that I need. 3 fields are text which I can populate the Word without any issues. However the fourth field is a memo with >255 characters.I'm struggling to come up with the proper code to allow me to populate the Word field with the memo data that has more than 255 characters. The code I have so far is listed below. But when it hits the memo field, it crashes on the line I marked with **. I know it's not text, but I've tried many different field types, but nothing has worked so far.[code]...
View 1 RepliesMy intent is to have the code - on a button.click event - check the Username and Password fields and return an error depending on which is wrong. Or if both are wrong, return a different error message. I've set the username as parts and the password as parts (still learning how to use external authentication). [Code]
View 2 RepliesI have several sqldatasources for my gridview. All of the columns are autogenerated. However they all have some consistent fields and I'd like to make those fields template fields so I can modify the edit template for them such as adding a drop down menu. Is this possible?
View 1 Replieshow do I search for records using keywords from a textbox in all fields within my table (within my database).I am only aware of filtering rows based on a single column value only
View 2 Repliesexperience on how to create an engine using C# (VB.NET is okay too) that is generic enough to handle most cases of MS Word text fields I need to fill with data I'm getting from a database? In short, I'm about to embark on this little Office automation excursion and I'm hoping a little bit of feedback here.
View 2 RepliesIn the long rung, I'm trying to setup a program to have a local database of files (It's a media player, so think of the library in WMP). I'm just trying to figure out how to do it, so this is a proof of concept thing I'm having a problem with.
Here's the code:
Code:
Dim dsDataset As New Database1DataSet
Dim drRow As Database1DataSet.FilesRow
[code].....
I'm using a SQL Express 64 database on a separate server virtual machine. I've been developing my app for some time now in VS2008 on XP SP3. Using .Net 3.5 I've just come across a strange problem. If I update a checkbox from unchecked (the default) to checked, it saves OK. If I click to uncheck it, the change does not get saved. I'm using the UpdateAll method. I tried a single Update command as well, just for that table, but it was the same.
[Code]...
im new to this Submit information to web fields but this is what i came up with... im not sure if its corrent. that the WebBrowser1.Document.Submit is wrong def but here is my code
[Code]...
I have the following SQL Expression Field in my Crystal Report 11.5
{fn CONCAT({fn CONCAT("SPR_PRODUCT"."PRODUCT_ID","SPR_PRODUCT_SUB_ITEM"."P_SUB_ITEM_ID" )},{fn CONCAT("SPR_PRODUCT_ITEM"."P_ITEM_ID","SPR_PRODUCT_GROUP"."P_GROUP_ID" )} )}
It works well in the Preview Mode. But when I use the report in my VB.NET 2008 Project it says the following:
[Code]...
I've been attempting to tinker around with connecting a MS access database to a vb 2008 app. I've successfully connected and can access the data by using the add data sources tab. But what I'm trying to do is create a form that has a (1) single line text box, (1) button, and (1)multi line text box. I enter a name in the single line text box, click the button(search db), and when the info is found, it is displayed in the multi-line text box.
View 1 RepliesCan I display two fields of a data in a combo box. E.g. when I have to select a customer, its name and city should be shown.... Like...
M/s Ananad Traders, Mumbai
M/s Anand Traders, Kolkata and so on.
I want to display in a combobox the names of the fields of a table (table is in SQL server 2005).
View 6 Replies