VS 2008 SplitContainer - Display Another Form Inside The Other Part Of The SplitContainer Which Is Panel
Nov 10, 2009
I am having a problem figuring out one thing with my program. It's about SplitContainer. To elaborate, I put a SplitContainer on a form. It divided my form into two parts, which I wanted. On the left side panel there are buttons, and when I click on a button I would want to display another form inside the other part of the SplitContainer which is Panel2.
I show forms in a SplitContainer Panel, but since the FormBorderStyle is set to none I'd like to apply a drop shadow. The following code works perfect if the form is not inside the panel
Protected Overrides ReadOnly Property CreateParams() As System.Windows.Forms.CreateParams Get
I have a project with 2 Forms. Form1 with 2 SplitContainers and the code below to show the Form2 inside SplitContainer2.Panel2. Form2 with no borders and orange color.
Public Class Form1 Declare Auto Function SetParent Lib "user32" (ByVal hWndChild As IntPtr, ByVal nWndPArent As IntPtr) As Integer Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[code]....
I want to resize Form2 when change Form1 size by mouse.I use frm.Size = SplitContainer2.Panel2.Size but look in pictures what happen:This is Form1 without Form2 inside Panel2 This is the application in first run. Form2 showed in Panel2 with orange color.The size is OK (frm.Size = SplitContainer2.Panel2.Size)Now i have change the size of Form1 with mouse click (or move form corner).Look the Form2 in Panel2. Didn't change size. Stay in first run size.How to change the size of Form2 when i change the size of Form1?
I have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
Im having a problem with a datagridview which is saved on a UserControl which is then loaded into a SplitContainer. The problem is that the forms load fine but the datagridview doesn't populate on load. It will populate however when I search for results using the toolstrip.
I have a splitcontainer with horizontal orientation. I want a fixed height for panel2 only during form resize, and let splitter resize panel2. Now I'm doing it this way, but I'm not satisfy because user notice that the panel resize
Private Sub Form1_ResizeBegin(ByVal sender As Object, ByVal e As System.EventArgs) _ Handles Me.ResizeBegin spil = SplitContainer1.Height - SplitContainer1.SplitterDistance End Sub Private Sub Form1_ResizeEnd(ByVal sender As Object, ByVal e As System.EventArgs) _ Handles Me.ResizeEnd SplitContainer1.SplitterDistance = SplitContainer1.Height - spil End Sub
In Form1 I have a SplitContainer with Panels.In SplitContainer1.Panel2 i have a Form2 (Inherit) and a GroupBox1.
[code]...
When i Start the Application, Form1 Appear with 2 Panels. In SplitContainer1.Panel1 is the Button1 and in SplitContainer1.Panel2 is not visible the GroupBox1.I press the Button1 and nothing happen. Why? How can i make visible the GroupBox1 by Button1?
I have a SplitContainer on a form that has 2 panels. The top panel has a FlowPanelLayout control docked in it and the bottom panel has a DataGridView docked in it. I want the top panel to be collapsed when the form is first shown. As the user adds controls to the FlowPanel I want to grow the top panel just enough to see the controls and visa versa. When the user removes controls from the FlowPanel I want to shrink the top panel. If no controls exist I want the top panel to collapse again.
Can I do this by changing properties of all the controls at design time, because I can't figure out the right combination to make it work? Or do I have to do this programmatically?
me if it's possible to have a control (e.g. a picturebox) in one panel of the splitcontainer control, and then be able to drag the control in runtime to the other panel?
I have an MDI form and I want to add a treeview and have it docked on the left. I want to use a splitcontainer but I only need the left panel to be visible and sizeable.
I have a form that is currently being displayed in a split container with panel 1 holding a treeview and panel2 holding the form. my code for this is here. This is when selecting a item from the treeview.
[Code]....
When I view this in action however it cuts off about a quarter inch from the right of any form I use.
I have a master form which uses the SplitContainer control. The PANEL1 of the split carries the MenuStrip and Panel2 is used to call related external forms
Code (refer below): Function ResetSplitContainerPanel2 clears the Panel2 and loads the new form using the SetFormAttributesToLoadInPanel2
Issue: Although SettingSplitContainer.Panel2.Controls.Clear() clears the Panel2 but the form still maintains the form in the editable mode. If I call the same form again, I can see the values which I typed earlier
Output Expected: On Load of new form, the previous loaded form in PANEL2 should be disposed completely
Private Sub ResetSplitContainerPanel2() SettingSplitContainer.Panel2.Controls.Clear() End Sub Private Function SetFormAttributesToLoadInPanel2(ByVal formNameToChange As Form) As Boolean On Error GoTo errHandler [Code] .....
ErrHandler: MsgBox("Error Description: " & Err.Description, vbOKOnly, "Error") SetFormAttributesToLoadInPanel2 = True Exit Function End Function
how to place a visible image in the splitcontainer so it would be obvious for users to see that the area is movable. Like the split container in SplitContainer Class(System.Windows.Forms) which has the gray with
I have a form with a TabControl that is set to fill the entire form. On one page I have a SplitContainer that I set the Dock to Fill.When I resize the window the TabControl resizes with it, but not the SplitContainer. I'm assuming I just have some properties set wrong.
I'm creating a usercontrol with a splitcontainer. I can reposition the split when running, but when designing on a form I can't adjust the position graphically, I can only do it by typing a new SplitterDistance. Is there a way to get a grip on that position at design time?
I have a form called Form1. wherein Form1 has a split panel container. on the right side of Form1 is a web browser window. the right side are the buttons. one button there is calling another form. but there's a problem on this Form called Form2. I have google earth EXE and it's component files together with the same folder of the project. The Form2 will call the googleearth.exe file now... I know the program syntax
I have created a form with a panel; I have a MS Word document inmy local drive and I want to display the filenem with icon inside the panel. It is very similiar to the Ourlook when we attach a word documnet and outlook displays the filename with icon.
I am trying to access controls that were added to the form and created code all before I added them to a panel. Upon form loading I create the form handle into a dictionary. then I call that dictionary ID and add data to the controls. I can't seem to add data to the controls inside the panel.. I think it is something simple. I may just be over looking the method I need to call.
I have only recently started using VB.NET after having a little experience in VB6. I am trying hard to force myself into this OOP mindset. I want to know if a certain thing is possible.
I want to be able to call a function in the beginning of my main form's startup sub. The function call would look something like this.
Code: Private Sub frmMain_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim Username, Password, NewPassword as String
How to move a label up, down, left, right inside the panel control? The label should move up when I press a "button for up", the label should move down when I press button "button for down".
Inside a form, I would like to display a pdf file which is already available in my resources (template file "untitled"). In this pdf file, I have some fields which get their values from some texboxes in another form. My aim is, when the user triggers the button to call this form, it should insert the values inside the pdf file and display the output pdf inside the form.I have written the code to an extend but could not finish it myself after my many trials... Now here are the two things I cannot manage:I can use a directory to read the template pdf "untitled1.pdf". But my aim is to use the file inside my resources. can save the output file in a directory but this is not I want to do. I want to display the output pdf.
How does Visual Studio and other similar programs display a form in their IDE? Is it possible to achieve the same or a similar effect using C# or VB.NET?
I have a form1 with a splitcontainer. I have put a button on the left panel, whenever user click the button, form2 will be displayed in the right panel.The question now is, i am not allowed to highlight the textbox in form2 with mouse. But i still can use the keyboard to highlight.
1) Replace textbox with richtextbox
2) set formborderstyle to Windows.Forms.FormBorderStyle.None.