i have a panel docked at the top of my form with a button and a textbox. Also have a webbrowser docked below the panel filling the rest of the form.when i run the form and maximize it, the panel and webbrowser resizes correctly as they are docked but the button and textbox stays where it is, how would i make the button and textbox always stay center screen so if i maximize it will be center.
View 2 RepliesI need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 RepliesI have a panel in my form and 5 buttons. All the buttons are docked to the top. Also in the panel I have a treeview ctl that is set to fill. What I am trying to accomplish is when you push one of the buttons the remainder move to the bottom and the treeview ctl fills between the buttons.
View 2 RepliesI have 5 columns of text boxes 5*5=25 textboxes and I want to put buttons that will stop every column like on off.
View 32 RepliesWhen a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
I have a grid which users enter their contact information - fname,lname then phone number.I want to know how i can when the usr clicks a button create an extra row of input boxes..And if possible be told how to make the form scrollable, so i can have many, many input boxes present when required.
View 8 RepliesI need to figure out how to get the center of a panel box to x = 0 and y = 0 with the max x and y values are 100 and the min x and y values = -100.
View 3 RepliesI have a form with 6 buttons, when form get maximize the buttons is not in the center anymore, how can I do the buttons get in the center always?
View 5 RepliesI have a list of images (paths) and when I click one the image is shown in a picturebox which is located in a panel which I can resize at runtime. The location of the picturebox = 0;0 and sizemode = autosize, because I don't know what size the images are.How do I make it so that the (small) images are always shown in the center of the panel?
View 1 Repliesi put Picturebox in the Panel control i set Autoscroll Propertu of Panel set to True i maximize the size of PictureBox OnClick Event of PictureBox
PictureBox1.Size =
New Size(PictureBox1.Width + 50, PictureBox1.Height + 50)i want to Center and Clicked Location mean adjust the scroll of Panel according to the Clicked Location like Windows Picture and Fax Viewer?
i put Picturebox in the Panel control i set Autoscroll Propertu of Panel set to True i maximize the size of PictureBox OnClick Event of PictureBox
PictureBox1.Size =
New Size(PictureBox1.Width + 50, PictureBox1.Height + 50)i want to Center and Clicked Location mean adjust the scroll of Panel according to the Clicked Location like Windows Picture and Fax Viewer?
I need to know how to have a button on a tab to create another button on a second tab that contains a panel, with appropriate spacing, the same size as other buttons already present, and the name of the tab that generated this new button as the text on the newly created button. I.e. button1 on tab1 will create and place a new button on a panel in tab2 that already has a grid of buttons (maybe 3x10 buttons) which will be placed underneath a particular column with the text tab2 on the new button which can also refer back to that tab automatically. Hopefully we can get all this code under a single button event.
I also don't know how to have a button on tab1 that focuses on tab2, which sets the back button on tab2 with a reference to go back to tab1 in order to remain dynamic. I.e. clicking on tab1's button will go to tab2 and set the back button there with a link back to the tab it was referred from.
I'd also like to know if there's an easy way to create and destroy tabs with a specific layout. I.e. We have home tab, and comment tab. (This is for the sake of argument) On the comment tab1 (which contains all posted comments), we have a new comment button which creates a comment tab2 (or a dialog box for that matter) with appropriate textboxes, labels, and buttons in the right places which could also make use of the issues I posted above. So the new comment button on the comment tab1 will create either a new comment tab2 with appropriate objects, or a dialog box with the same, and then the submit button on this comment tab2 or box will create a new textfield/buttons on the panel containing the grid of buttons with the information provided in the fields from comment tab2/dialog box which is then destroyed.
I hope i haven't made the examples too confusing, but I can't figure out how to even make progress in these directions. Trying either fails completely, or semi-fails in getting these examples to function 100%.
I've already tried posting in other forums, but with no replies. Hopefully you all can help me figure this out.EDIT: This is not homework, I have scoured forums and google trying to find the answer to these problems. I'm hoping that because these are mainly VB based forums I can find some answers here.
This works if I don't have an IfElse statement but even then it only shows 1 txtBox().I want 4 panels and 4 rows of textboxes in each one. with multiple txtbox()'s in each oneI'm just starting on it, but as usual I hit an error, see below. Also, how do I get this code in here without the double spacing problem?
Dim pnlbox(4)
As Panel
Dim txtBox(70)
[code].....
i created a panel with few buttons, all buttons have the same size, most buttons hold images, 2 of them hold string (1 or 2 digit) the string buttons will not align with the rest of them, and i have no idea why ?
[Code]...
Dim tab As Integer = -1
Dim y As Integer = 54
Dim r As Integer = 1
[code]....
Im creating a program that has a dynamic amount of tab pages, however i can only figure out how to create the buttons and textboxes for 1 tab.
TabPage1.Controls.Add(tb)
TabPage1.Controls.Add(b1)
How do i turn that control code into dynamic code that will add the same interface to every single button and textbox?
Is it possible for me to set the opacity of a button or textbox? I know that you can set the opacity for a form, but I'm not so sure about a button or textbox.
View 4 RepliesI have setup a small app to track company info and purchases, etc. I decided to move a panel with textboxes from Form1 to Form2. I did not move any code and after some thinking on it, I decided to move the panel back to form1 and continue with my original plan. Trouble came when I tried to run the app. The ide displays it perfectly but none of my code is working. Here is what I noticed ...
My original code from a textbox ...
Code:
Private Sub TxtCompany_GotFocus(ByVal sender As Object, ByVal e As System.EventArgs)
If TxtCompany.Text <> "" Then
TempCompany = TxtCompany.Text
TxtCompany.Text = ""
End If
End Sub
This used to work before I moved the panel. I went back to txtCompany's events and doubleclicked "got focus" to start a new event to see if it was the same as what I already had. It displayed this ...
Code:
Private Sub TxtCompany_GotFocus1(ByVal sender As Object, ByVal e As System.EventArgs) Handles TxtCompany.GotFocus
End Sub
It's like I somehow created a dup of panel and lost it's original status and now the ide wants me to make a copy of the code. How do I get the ide to see the panel and it's contents as the original?
How do I code different buttons to display different information on the same panel removing the previous information before displaying the new information?
View 4 RepliesI wanna set up a panel, that will, when opend up will sit on the side of the screen. It will consist of around 8 or so large buttons each with a different name on them. When the buttons are clicked on they will send the keys Ctrl+shift+F9 for example. Each different button will have a different variation of keys that it will automaticly send. The idea behind this is that I will have another program running that will be se up to perform actions when certain keys are pressed (Autohotkey if your familiar).
Now I'll be honest, I dont have a clue with visual basic, or any code other than html, hence why I'm posting here hoping I can get some help. Can anyone provide me with some information on how to set up buttons or how to do this entire task?
I have a panel that has 8 buttons located on it each named But1,But2,ect. What I am trying to figure out how to do is resize all of the buttons in width when the panel is resized in width. [Code] Is there something simpler to do this as I will eventually have 3 panels with 8 buttons on each one that would need to be resized at the same time. In VB this was controlled by an index and a for next loop, but I see no way to create a control array for all the buttons when they are on separate panels.
View 15 RepliesHow can i make my app in a different language, so people can select another language,I need to translate some buttons, textboxes and labels.
View 2 Repliesnot quite sure why this is happening but I am just debugging right now and the buttons I am using are opening the wrong forms, I have made sure of the form names, button names etc and it looks all good but specifically the btnPrintReport is opening up the form enterAuditForm while btnProcessAudit is opening printAuditForm instead of their correct ones.
Here's my code, it is rather simple. The reason why I am using a separate sub as my btnPrintReport is because I am using that also on the baseForm's OnLoad Event, which again is also opening the wrong form.
[Code]...
I have a grid which users enter their contact information - fname,lname then phone number.
I want to know how i can when the usr clicks a button create an extra row of input boxes
And if possible be told how to make the form scrollable, so i can have many, many input boxes present when required
I have a page that is based on a Master Page. The page has AJAX contolled tabs and on one tab I have 2 panels, each with 1 button. Only 1 panel is visible at a time. I am trying to get the button on the visible panel to be the DefaultButton so that when Enter is pressed the click event is fired off. The issue that I am having is that I get this error no matter what I try: The DefaultButton of 'form1' must be the ID of a control of type IButtonControl.I have tried setting the Default Button property of the panel to the buttons client id and to its unique id.
[Code]...
I have a VB.Net project. The form has a panel and few buttons inside panel... The problem is that the background image of the panel is only visible behind buttons....but not in empty space....The app is running fine on Windows 7 but the problem comes on XP....I have tried "Enable XP Visual Styles" but no luck....When i dock a button to fill all empty space then the background image is visible....but if i remove the button ... background image is not visible....
View 2 RepliesI am creating an interface with several textboxes and HTML component and several buttons.But when I drag any textbox onto the existing form they line up vertically one under the another or they attach directly together on the same row. I want to be able to drag and drop and place these as well as the HTML component wherever I need on the form. In VB6 I simply selected what I needed and placed it with ease. Can someone tell me what I need to do gain this simple freedom in vb.net
View 3 RepliesI am having trouble with a blackjack game I am creating
I have buttons 1 - 13 (A-K)
I have 5 Textboxes which when the above buttons are pressed displays the values in the textboxes.
I also have one more textbox which adds up the values of the above 5 textboxes to give your Black Jack Total.
The problem I have is if an Ace (11) is in one of the textboxes and the Total Value exceeds 21 I need to have the Ace (11) change its value to 1 instead.
textbox 1 - 5 will be the card values
textbox6.text will be the total Value
I have tried......
if textbox6.text > 21 and textbox1.text = 11 then textbox1.text = 1
This seems to work fine however it only solves the problem of an Ace (11) appearing in textbox1.text so i tried to repeat the code with the other boxes...
if textbox6.text > 21 and textbox1.text = 11 then textbox1.text = 1
if textbox6.text > 21 and textbox2.text = 11 then textbox2.text = 1
if textbox6.text > 21 and textbox3.text = 11 then textbox3.text = 1
if textbox6.text > 21 and textbox4.text = 11 then textbox4.text = 1
if textbox6.text > 21 and textbox5.text = 11 then textbox5.text = 1
However this does not work and my program freezes?
I am trying to do an application where several textboxes and buttons will be added to a groupbox.
for example..
code:
I might have anywhere between 1 and 20 rows of these textboxes and buttons. I can add buttons on from.. but how would i add the textboxes or buttons to the say Procedure for MyButton_Click... Handles MyButton_1.click, MyButton_2.click
i try to make an array of controls and by clicking buttons add new textboxes or comboboxes here is my code
Public Class Form1
Dim CArray() As Control
Dim lngArrayNum As Long = 0
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Add_Control()End Sub Private Sub Add_Control(Optional ByVal intType As Integer = 0)
[Code]...
When I call this Messagebox, is it possible to center the Messagebox on the parent form rather than centering it on the center of the screen?
View 2 Replies