How do I code different buttons to display different information on the same panel removing the previous information before displaying the new information?
View 4 Replies
Make all the buttons code work properly with the help of combo box The combo box will show the category.Suppose there are 2 categories A and B.When we click on A then the code given inside 4 buttons should work.I tried in this way ,I checked the condition of selecteditem based on that added all 4buttons sub code.
[Code]...
When a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
can you help me for the search button code that once you do the search, the info will automatically display in a data grid?
View 1 RepliesCODE:
Right now i have the following code. it is 4 radio buttons that if selected will display the price of a ticket.
There is a button called "repeat offender" that should take the price and double it. so me, being new to visual basic, were thinking of trying an if statement such as If it is selected decTicketTotal * 2
But this did not work. any help would be appreciated.. just trying to get the repeat offender selection working so when it calculates the price will double.
i created a panel with few buttons, all buttons have the same size, most buttons hold images, 2 of them hold string (1 or 2 digit) the string buttons will not align with the rest of them, and i have no idea why ?
[Code]...
So im creating a mail bomber here is the code
Imports System.Net.Mail
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs)
[CODE]...
Pretty simble but im trying to make buttons that chage between [URL] and [URL]on the timer code
Dim MyMailMessage As New MailMessage()
MyMailMessage.From = New MailAddress(TextBox1.Text)
MyMailMessage.To.Add(TextBox3.Text)
[CODE]...
I have a panel in my form and 5 buttons. All the buttons are docked to the top. Also in the panel I have a treeview ctl that is set to fill. What I am trying to accomplish is when you push one of the buttons the remainder move to the bottom and the treeview ctl fills between the buttons.
View 2 RepliesI wanna set up a panel, that will, when opend up will sit on the side of the screen. It will consist of around 8 or so large buttons each with a different name on them. When the buttons are clicked on they will send the keys Ctrl+shift+F9 for example. Each different button will have a different variation of keys that it will automaticly send. The idea behind this is that I will have another program running that will be se up to perform actions when certain keys are pressed (Autohotkey if your familiar).
Now I'll be honest, I dont have a clue with visual basic, or any code other than html, hence why I'm posting here hoping I can get some help. Can anyone provide me with some information on how to set up buttons or how to do this entire task?
I have a panel that has 8 buttons located on it each named But1,But2,ect. What I am trying to figure out how to do is resize all of the buttons in width when the panel is resized in width. [Code] Is there something simpler to do this as I will eventually have 3 panels with 8 buttons on each one that would need to be resized at the same time. In VB this was controlled by an index and a for next loop, but I see no way to create a control array for all the buttons when they are on separate panels.
View 15 Repliesi have a panel docked at the top of my form with a button and a textbox. Also have a webbrowser docked below the panel filling the rest of the form.when i run the form and maximize it, the panel and webbrowser resizes correctly as they are docked but the button and textbox stays where it is, how would i make the button and textbox always stay center screen so if i maximize it will be center.
View 2 Repliesnot quite sure why this is happening but I am just debugging right now and the buttons I am using are opening the wrong forms, I have made sure of the form names, button names etc and it looks all good but specifically the btnPrintReport is opening up the form enterAuditForm while btnProcessAudit is opening printAuditForm instead of their correct ones.
Here's my code, it is rather simple. The reason why I am using a separate sub as my btnPrintReport is because I am using that also on the baseForm's OnLoad Event, which again is also opening the wrong form.
[Code]...
I have a page that is based on a Master Page. The page has AJAX contolled tabs and on one tab I have 2 panels, each with 1 button. Only 1 panel is visible at a time. I am trying to get the button on the visible panel to be the DefaultButton so that when Enter is pressed the click event is fired off. The issue that I am having is that I get this error no matter what I try: The DefaultButton of 'form1' must be the ID of a control of type IButtonControl.I have tried setting the Default Button property of the panel to the buttons client id and to its unique id.
[Code]...
I have a VB.Net project. The form has a panel and few buttons inside panel... The problem is that the background image of the panel is only visible behind buttons....but not in empty space....The app is running fine on Windows 7 but the problem comes on XP....I have tried "Enable XP Visual Styles" but no luck....When i dock a button to fill all empty space then the background image is visible....but if i remove the button ... background image is not visible....
View 2 RepliesFor example, when I click on the btn(5) I would like the textbox1 says: "5"
[Code]....
I need to know how to have a button on a tab to create another button on a second tab that contains a panel, with appropriate spacing, the same size as other buttons already present, and the name of the tab that generated this new button as the text on the newly created button. I.e. button1 on tab1 will create and place a new button on a panel in tab2 that already has a grid of buttons (maybe 3x10 buttons) which will be placed underneath a particular column with the text tab2 on the new button which can also refer back to that tab automatically. Hopefully we can get all this code under a single button event.
I also don't know how to have a button on tab1 that focuses on tab2, which sets the back button on tab2 with a reference to go back to tab1 in order to remain dynamic. I.e. clicking on tab1's button will go to tab2 and set the back button there with a link back to the tab it was referred from.
I'd also like to know if there's an easy way to create and destroy tabs with a specific layout. I.e. We have home tab, and comment tab. (This is for the sake of argument) On the comment tab1 (which contains all posted comments), we have a new comment button which creates a comment tab2 (or a dialog box for that matter) with appropriate textboxes, labels, and buttons in the right places which could also make use of the issues I posted above. So the new comment button on the comment tab1 will create either a new comment tab2 with appropriate objects, or a dialog box with the same, and then the submit button on this comment tab2 or box will create a new textfield/buttons on the panel containing the grid of buttons with the information provided in the fields from comment tab2/dialog box which is then destroyed.
I hope i haven't made the examples too confusing, but I can't figure out how to even make progress in these directions. Trying either fails completely, or semi-fails in getting these examples to function 100%.
I've already tried posting in other forums, but with no replies. Hopefully you all can help me figure this out.EDIT: This is not homework, I have scoured forums and google trying to find the answer to these problems. I'm hoping that because these are mainly VB based forums I can find some answers here.
I make a panel visible that has a tab control on it.
The panel becomes visible - I can see all three tab pages.
But the contents of the tab page is blank - until I actually click a tab heading.
I need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 Repliesam new here. am using vb2010. I have a form with 3 panel. each panel have 10buttons. when click on button 1 from panel 1, it will show panel 2. Then on panel 2, when cancel button is click, it will go back to panel 1. My problem is, when go back to panel 1, all the buttons in panel 1 shows very slow. It shows one button after another.
View 8 RepliesI'm fairly new to VB 2010 but very familiar with programming in other languages. I'm trying to make a quick application but I'm at a stand still. I know it's something simple but I've searched around and I may have found the answer but because I don't understand the problem I'll never know. So here goes.
I'm not at my programming station at the moment so I'm going to be very general with my example. Here's what I want to do[code]...
How do I Display controls in a Mdi panel or menuStrip when a certain form is active?
View 4 RepliesI have a patient registration form in my project...in which I have to browse the image of the patient save it in the database and when I need the details of the patient again the uploaded image should also be displayed..
View 1 RepliesI have a database with three rows and colums
IDNAMESURNAME
1BOBSMITH
2JIMJONES
3MARKTHOMAS
I have three buttons and I have a panel with the details bound to the database (not a datagridview, but the other option that you can drag onto the form: "details")
When the user presses button 1 I want the row with "ID 1" to be displaied in the details. Likewise for buttons two and three. (The user will later be able to edit the names and save the changes, so this is why I want to use ID as the selector)
I have been looking at things like "selected key" and "selectedindex" but I can seem to find a way to populate the details. I tried to make a query serach but it's not working (i think beacuse ID is the identity seed?)
* I added the picture to try and explain better what I am trying to do. the part in the middle is bound to my database. It shows my database in in "details" form, not sure if it has a special title.. the others are obviously buttons. I want the middle parts to show the selected row. Using the navigator bar above I can type 3, hit enter, and it will show me row 3.. I want to emulate this idea but using the buttons.
I've been making Web Colour /rgb colour picker plus code I cant get the panel to display the right colour being selected by the trackbar or input boxes.
Here is the code
HTML
Imports System.Windows.Forms
Imports System.Drawing
Imports System.Web
Imports System.Data
Imports System
[Code] .....
I have a listbox populated with peoples names. When I click on a persons name in the listbox, a datagrid will unhide itslef, connect to a DB, and list all of the pictures that person has. All the pictures are stored on a drive in a folder named after the person. i.e.
Greg Palinkas has 52 images stored in F:PicturesGregPalinkasImages.
I would like to display all of those pictures in a Table Layout Panel populated by the choice I made in the listbox, so if I select Greg Palinkas, the Data Grid is pupulated with the names of all the images i have, and the Table Layout Panel is populated with all the pictures I have in my GregPalinkasImages folder. I have got the Data Grid updating and running smoothly, but am lost as to how to get the images to come up.
I need to browse a file and copy the file from one location to another. I am done with the file copying but I need to add the list of all files present under that folder in a control( dont know which control to use) and it shud be a link....so that when the user clicks that link it should open the file with that reader...
Suppose a pdf file shud be opened by the pdf reader.[code...]
I am having trouble organizing the needed registers on page Document Print If anyone has any such Content or to have a better control of Info. How to display the image information according to the percentage of Code 33 is wrong because it exceeds 100%.I have to change my logic as pre set four record each item.[code]
View 8 RepliesLet me see if I can explain it.... Am basically doing a program that records project time for each worker and how much items(by type) they collect in total (No individual total)[code]...
View 1 RepliesI am trying to display the data I've retrieved from a text file on the datagridview. But I can only display the first set of information on the datagridview. There are 2 set of information.
Private Sub DoDetection()
ListStatus.Rows.Clear()
'listHistory.Rows.Clear()
[Code]......
[Code]...
my design is attach! Attached image(s)
