VS 2008 - Connection To Godaddy Sql Server - Error: 40
Jun 3, 2010
I created a vb form application that I want to query a SQL Server database that is hosted through godaddy. Below I have my function that calls the db and also my connection string in my app.config file. When it tries to open the connection I get the following: {"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}. Do I have to set something on the godaddy end to allow a connection? Or can I only access the database from a web page on my site? [Code]
View 2 Replies
ADVERTISEMENT
Nov 18, 2009
Error message receiving A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) The project is written in VB.Net 2008. Production server uses SQL 2008, Dev Server uses SQL 2000. The application has been built and published.
Prod Connection String: strCN = "server=SGMAGNCPQ03.;Initial Catalog=APO_Tax;Integrated Security=True"
Dev Connection String: strCN = "server=S04423711940995.;Initial Catalog=APO_Tax;Integrated Security=True"
The Problem: When I change the connect string from dev back to prod and try to run my app, I get the above error message. If I reboot everything works fine but if I switch the connect string from prod to dev and try to go back to prod, I'm back to the same problem.
View 2 Replies
May 14, 2010
This will happen at random, and I can always just catch the error and re-establish connection to the server, but I am confused as to why. When doing lots of inserting into the sql server, I only establish one connection that is public, instead of many little connections. I had my doubts on a public sql connection, but it's been running great, and I've seen no problems until this morning. Again, this random moment I hit an error that stated, sql connection state is broken. Is it bad practice to just accept this error, and when it happens, re-establish the connection?
View 7 Replies
Apr 19, 2011
This is my connection string
"Data Source=192.168.1.2,1433;Network Library=DBMSSOCN;Initial Catalog=RFX2220;User ID=sa;Password=PhhassssWord!;"
this is the error message
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
(1) windows port enabled
(2) server configured for windows + sql server authentication
(3) & also enabled for TCP/IP
View 1 Replies
Aug 13, 2010
I am trying to do something fairly simple.. allow my user to import thier data from Excel into SQL Server, where it can be used by the application.To do this, I'm using the fairly simple code that is common everywhere I look:
strFilePath = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + fdlgFileOpen.FileName + ";Extended Properties=Excel 8.0"
connExcel = New OleDbConnection(strFilePath)
connExcel.Open()
[Code]...
Now, on my development computer this code works perfectly. The data imports, and I can go on my merry way.
On the TEST computer, this code throws the error: "ODBC -- Connection to {SQL Server} servernamesqlservername failed." This seems very odd to me, because I'm using exactly the same SQL Server and database to interact with the application, and all the other screens in the application work perfectly. The test computer CAN connect to this SQL Server, but it keeps throwing this error whenever I try import data from Excel.I've tried everything I can think of - using the server's IP address instead of the server name, sending the SQL Server administrator data along with the request, taking out the Trusted_Connection=Yes... nothing works. What is going on here? How can this code work fine on my computer, and hiccup on another?
View 1 Replies
Mar 15, 2009
I have a simple scraper. It works on some websites, but on some there is this Error:
Quote:
IOException was unhandled Unable to read data from the transport connection: The connection was closed
It is occuring at "Dim htmlresults As String = Urlcontents.ReadToEnd()".
'Create the HttpWebRequest object
Dim req As HttpWebRequest = WebRequest.Create(URL)
'Set the timeout to 1 second (or 1,000 milliseconds)
req.Timeout = 10000
[code]....
View 2 Replies
May 19, 2012
Below error is thrown in a already opened program which connects to different database
A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
Program details: code done using vb.net with SQL Server 2008 as back-end
Two instance of same exe where running simultaneously in same PC but error was thrown only by one instance
Program uses both SqlConnection (ADO.NET) and ADODB connection (upgraded from VB6) and the error is thrown by both types of connection If the error is due to network problem with the server then why few programs work fine? I am not able to trace the reason for this behavior of the program
Can I know why this error occurs and why only in few programs of same instance
View 1 Replies
Aug 18, 2009
I have simple code that connects to Sql database... (well it doesn't)
VB
Dim objConn As New SqlConnection("Server=localhost;uid=***;pwd=***;database=***")
objConn.Open()
ERROR MESSAGE:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)But looks like something is wrong with "localhost" thing. Any help? Where can I get name of (my) server?
View 34 Replies
Mar 8, 2012
I get this error when I try to connect to my database. I used the same string provided in the database explorer "Connection String"
I do not have a password on the database.
This is a local database if that makes a difference
View 9 Replies
Mar 11, 2010
am working on a project and am using sql server 2005 express as my database server, the problem is i can;t connect to the sql server from any machine on my local network (windows).
Below is my connection string
con.ConnectionString = "Data Source=webserver1SQLEXPRESS;AttachDbFilename='C:POSM_DB.mdf';Integrated Security=True;Connect Timeout=30;User Instance=True;"
It works all right on the development machine but not on network, i think it has something to do with the network.
View 16 Replies
Feb 14, 2012
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim mail As New MailMessage
[Code]....
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required
View 1 Replies
Feb 24, 2006
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 2 Replies
Feb 19, 2009
I am trying to get this program to send an email, but still no luck. I am getting the following error that I do not understand. I do not understand what I am doing wrong. Also, I may have an issue that the computer I am writing this code on and trying to send the message does not have ISS and is just windows XP home.
The error is below
System.Net.Mail.SmtpException was unhandled
Message="The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.0 Must issue a STARTTLS command first. k41sm2133530rvb.6"
[code].....
View 2 Replies
Aug 23, 2011
I am working on a project using VS2010 SQL2008 and I saw an ODD behaviour , First let me tell you that the app runs without any problem in my developing pc (Windows Xp sp3 32bit)But when I was trying the application in another pc (Windows 7 32bit)I got this exception: A network-related or instance-specific error occured while establishing a connection to SQL server.The server was not found or was not accessible.Verfiy that the instance name is correct and that SQl server is configured to allow remote connections.
Now what is weird in this exception; Is when the application reaches the DataAdpater.Fill(dataset) line I got this exception but when the app reaches the DataAdpter.Insert(....) It runs without any problem .
And what is more weird is that I noticed that the dataset that is used in the previous insert procedure can later be filled with dataAdapter.Fill(...) procedure which it was giving me an exception before .
I tried these things as a solution:
1)Checked SQlBrowser running..
2)No aliases to Sql server at all to remove...
3)remote area connection--OK
4)TCP and UDP port 1433,1434 exception in firewall
5)Unistalled my only antivirus Norton
6)Added Tcp/IP ports in Sql protocols
7)My connection String is : onnectionString="Data Source=ALISQLEXPRESS;Initial Catalog=PALMSDATABASE;Integrated Security=True"
8)Also tried using Sql Server authentication (user Id and password)
what is the difference between fill and insert? My app. runs smoothly on the original pc ,What should I do?
View 13 Replies
Jan 19, 2011
I HOST MY ASP.NET WEBSITE ON WEBSERVER ..But after upload when i try to access my site ...
[URL]
Then following error occurs ....
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network
Interfaces, error: 26 - Error Locating
Server/Instance Specified)
i have changed my connectionstring in web.config file and all webpages to :
<connectionStrings>
<remove name="ConnectionString"/>
<add name="ConnectionString" connectionString="Data Source=69.16.253.19,1433; Network Library=DBMSSOCN; Initial Catalog=database;
[code]....
...before publishing and uploading my website to webserver ...I m confused the problem is from my local computer or the webserver ....and how to fix this error ?
View 4 Replies
May 19, 2010
My application requires a user to log in and allows them to edit a list of things. However, it seems that if the same user always logs in and out and edits the list, this user will run into a "System.Data.SqlClient.SqlException: Timeout expired." error. I've read a comment about it possibly caused by uncommitted transactions. And I do have one going in the application.
[Code]...
View 4 Replies
Aug 17, 2011
I am trying to connection to MS SQL SERVER 2008 database (students), i want to make sure:
1) If connection string that i made is OK
Dim connectionString As New SqlConnection("server=X86ONX64; database=students; Integrated Security=True")
2) How can i check if dataset is producing any results?
Code:
Public Class Form1
'Connection String + DataAdaptor + DataSet
'Declared Outside Any Subroutines/Functions
[Code].....
View 2 Replies
Apr 27, 2010
My application is VB.net 2008 with sql server 2008 , the application is working on the server . whereas in the client i got the error which i attached below Error" A Network - Related or instance - specific error occurred while establishing a connection to sql server. The server was not found or was not accessible.Verify that instance name is correct and that sql server is configured to allow remote connection"
View 1 Replies
Apr 27, 2012
I have a problem with a connecton from VB.Net to SQL Sever 2008. My code like this:
[Code]...
View 3 Replies
Sep 20, 2009
I'm trying to make a connection to SQL Server 2008 express Using this code
Dim Ordr As String = "Select * from Orders"
Dim con As SqlConnection = New SqlConnection("Data Source=localhost;Integrated Security=SSPI;" & _
"Initial Catalog=Orders")
Dim com As New SqlCommand(Orders, con)
[code]....
I get this error:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
View 13 Replies
Apr 21, 2009
I have herd that a new type (or old type) of connection when the server connects to the client. Is it really possible to do such a thing with mulit-Servers trying to connect to one client.How would I make one like that O.o.
View 5 Replies
May 12, 2009
I'm having problems tring to connect to the sql server 2005 express with and vb 2008 express.
I keep getting this error and here is the code too:
Login failed for user 'CHRIS-ARTZGuest'
connFabList = New SqlConnection("Data Source=CHRIS-ARTZ;Database=FabList.mdf;Integrated Security=True;")
View 6 Replies
Aug 19, 2010
After running the following sub (VS debugger), I try to detach the database in SSMS, but it shows the connection open still and won't let me detach. If I close program in debugger, the database shows no connections. I check the dataadapter's connection in the finally block and is shows closed. What gives
Private Function ClientMasterDBFiles(ByVal MasterClientDBConnection As String, ByVal DBName As String) As DataTable
[Code]...
View 1 Replies
Oct 2, 2008
Dim sqlConn As New SqlConnection("Server=.\SQLEXPRESS;uid=;pwd=;database=ContactManager")
sqlConn.Open()
Above is my connection string, The programs runs up until sqlConn.Open() and then i get the same error, using no UID and Pass, or using a uid and pass.
Login Failed For User ''. The user is not associated with a trusted sql server connection
I have the SQL Servers authentication se to Windows Authentication and SQL Authentication. I'm using Visual Studio 2005 and SQL Server 2005.
View 10 Replies
Oct 6, 2009
I have a windows service I created that checks for data to post to an off site webservice over SSL. The service checks every 10 seconds for data to send, if there is data it opens a connection to the remote webservice, and closes the connection after 120 seconds (still checking for data to send during this time). The service works fine if a user is RDP'd into the server, but as soon as no one is logged on and the service attempts to push data, I receive the following error:"The underlying connection was closed: An unexpected error occurred on a send."I have tried running the service as a local service, network service, under my login, and under a service account, but nothing seems to work. The PC it is running on is a windows 2003 server (virtualized - vmware)
Protected Overrides Function GetWebRequest(ByVal Uri As Uri) As System.Net.WebRequest Dim oWebrequest As System.Net.HttpWebRequest = MyBase.GetWebRequest(Uri) oWebrequest.KeepAlive = False oWebrequest.ConnectionGroupName = Guid.NewGuid.ToString oWebrequest.ProtocolVersion =
[code]....
View 1 Replies
Aug 22, 2009
I'm working on a project that getting infos from an Excel book. I've created an Excel book (called as "Kitap1.xls"), entered some infos and created a table (called as "asd") Then I added a DataGrid object on Form1 and codes setteled below; [code]Program is running but the infos ,which in the excel book, do not appearing in DataGrid1 object.
View 11 Replies
Jul 13, 2010
the next issue, that is only shown when the server is a Windows server 2008 machine , this is the information that I've found
[Code]...
View 2 Replies
Sep 29, 2011
this is driving me absolutely crazy. I am trying to send an email through a web service written in C# through GoDaddy's servers (smtp.secureserver.net) but for some reason it's not working. Here's my code:
public static void SendMessage(string mailFrom, string mailFromDisplayName, string[] mailTo, string[] mailCc, string subject, string body)
{
try
[code]....
View 1 Replies
Sep 1, 2010
I have a .NET 4.0 web application that I'm trying to get working on a GoDaddy shared hosting plan. It's their best windows one and from a requirement point of view on paper they have everything I need.
[Code]...
View 1 Replies
May 26, 2012
Possible Duplicate: How to find web hosting that meets my requirements?
I was going to use the asp.net charting with Visual Studios 2008 but GoDaddy hosting does not support the charting cause they won't install the component.So what are my options for charting/graphs for data? Looking for free if possible.
View 2 Replies
