VS 2008 - Read A Flat File And Insert The Records Into SQL Database - Streamreader Necessary?

Dec 29, 2010

I am looking at Visual Basic 2008 Step By Step. I need to read a flat file and insert the records into my SQL database. My code so far:

[Code]...

The INPUT line needs to be fixed. From what I can see, I need to move it all to a single field and use a split to parse it, correct? As I look at the entries on this site, all the code seems to use stream readers. Why would the book not do that? Am I missing something?

View 6 Replies


ADVERTISEMENT

Streamreader - Text File - To Read Into A Listview - Read From A Specific Line In That File

Mar 11, 2010

I have a txt file that I need to read into a listview, but I need to read from a specific line in that file. Below is a sample of the txt file to read,

6400,3200,2,95.5,84,76.6,0
1,2,-20,15,0,0,0,"NO",0,0
TOTAL GPM= 6400 HWT= 95.5 CWT= 84.0 IWBT= 76.6 ALTITUDE= 0

CODE]...

View 1 Replies

Read Data From A .csv File And Insert It Into Database?

Dec 16, 2010

I have problem with my application I have a table with 3 columns: column1(numeric(18,0), allow null), column2(nvarchar(255), allow null), column3(datetime, allow null). I want to read data from a .csv file and insert it into database. I use 'bulk' to insert data from file .csv into database instead of inserting query. But the problem is: the .csv file have to be formatted as:

[Code]....

View 1 Replies

VS 2008 Cant Read, Insert, Delete, Edit From The Database?

Jun 12, 2009

i am a beginner level member of vs2008i had create a interface. In Daily Transec.vb form i cant insert, edit, delete, go prev and net data. already i had created a localdatabase as "Expense"need you help to complete itso this is request to u that plz chk the link file and complete the DailyTran.vb form. nothing else

View 2 Replies

How Does A Streamreader Read A File

Dec 23, 2010

how does the streamreader read the file? how do you know where its up to? how does it read the file line by line, knowing where its read up?what program do you write so that it can read the file line by line and then put the text from the file into an array?

View 1 Replies

How To Read Data Via StreamReader From CSV File

Aug 26, 2011

I am reading csv file via streamreader. Issue is that in csv file if if the data is like "Read" then steamreader the same data is coming as ""Read"". How to remove this extra inverted commas?

View 1 Replies

Using A Streamreader To Read A Text File?

Jan 19, 2009

I'm using a streamreader to read a text file, in the text file i have some special characteres like "�,�,�", the streamreader doesnt return that characteres...

How to retrieve the correct characteres?

View 1 Replies

.net - Read And Write Into A File Using Streamwriter And Streamreader?

Jun 2, 2011

I am trying to read the content from a .csv file and storing it in a variable. Later I am writing that content into a newfile. Code is executing successfully but the data is not appearing in new file. Here is my code:

[Code]...

View 1 Replies

Anyway To Read Text File With UTF-8 Encoding Using Streamreader Or File Stream

Jun 21, 2010

i would like to ask is there anyway to read a txt file with UTF-8 encoding using streamreader or filestream. the txt file is contain some extended ASCII that makes me cannot read the characters properly. I hav tried Encoding.ASCII.GetString(Encoding.UTF8.GetBytes()) but still it return wrong character when it's reading extended ASCII code.

View 2 Replies

VS 2008 IRC Read Data Using StreamReader?

Mar 21, 2009

So I made an irc client that connects, sends commands, joins a channel etc perfectly. But I can't figure out how to use streamreader to read the data that the server is saying to me, or actually read what others are saying in channel.By the way, I used TCP client.

View 4 Replies

VS 2008 StreamReader Read Lines From Bottom To Top?

May 20, 2009

the default readline method of streamreader reads the text file from top to bottom how i can reverse it?from bottom to top?

View 8 Replies

Can Insert Records To Mysql Database

Oct 3, 2010

i build a code that can insert my records to mysql database.. the codes are correct it can save records to the mysql database. Now i want to know is what code will i used that will show an error if the records already exist, so it will not make the same records again. here is my code for my INSERT code for mysql databas.[code]

View 4 Replies

Database Records Being Displayed When Trying To Insert New

Jul 6, 2010

I'm in the process of making 2 database applications. Each are encountering their own set of errors. For this particular application, I have a "Main Menu" form that has a button which loads an "Add Record" form. The user is suppose to be able to insert new records here via text boxes, but the problem is that record with the first primary key is being displayed in the text boxes when the "Add Record" form loads. I have no idea and can't find anything anywhere about making these boxes blank. I'm connecting to the .accdb through a dataset.

View 5 Replies

Insert All Records Into External Database?

Nov 26, 2009

I have the following Code, to insert all records of a table from one database to a second database

Dim sScrDb As String = "C:CSystemsDataMain.mdb"
Dim sConn As String = "Provider=Microsoft.Jet.OLEDB.4.0;" & "Data Source=" & sScrDb
Dim sDstDb As String = "C:CSystemsProjectsDataBckBackUp.Mdb"

[Code]....

But now I want to put a password on the second database. I can't find how to put this password in the SQL insert into statement

View 2 Replies

Insert/Delete Records In A MSSQL Database?

Mar 8, 2012

I am trying to Insert/Delete records in a MSSQL database based on if a checkbox is checked or unchecked. The checkbox is an item template in a datagrid, I can check/uncheck the checkbox but it doesn't do an insert or delete. Here is my code:

[Code].....

But then I get the error that the control chkmap has not been declared. I am confused as to how this needs to be declared, do I set a variable to the FindControl("chkmap") and then set it as variable.checked = true ?

View 7 Replies

Using The MSAccess Database To Insert Data Of Records

Oct 1, 2009

Does anyone know the sql statement for the inserting of records? I am using the MSAccess database to insert my data of records. I need it asap

View 2 Replies

Insert Records From A Datagrid With Multiple Rows Into Database?

Aug 30, 2010

I want to insert records from a datagrid with multiple rows, into the database, is it possible?

View 1 Replies

Loop Through Datagridview By Bands And Insert Records To Database?

Nov 23, 2010

I choose an item from dgrpoducts which has all the products in inventory and it sends the selected items to another datagridivew called dgiselectedproducts. These are the selected items.

View 5 Replies

VS 2010 Adding Records Database (insert Into), Progressbar?

Apr 7, 2012

I'm adding records to my table which works fine. However, when I want to add a lot of records it takes some time and it looks like nothing is happening. I want to add a progressbar to show the progress.

For Each dgvrow As DataGridViewRow In mydgv.Rows
progress.Maximum = mydgv.Rows.Count
Dim cmd_save As New MySqlCommand("INSERT INTO ....etc", conn)

[code].....

View 3 Replies

Streamreader Limits - The Streamreader Works Fine Until The File Is More Than 100,000 Bytes Long?

Apr 19, 2011

I have a problem with a streamreader in visual basic 2008.I am updating a database from text files on an ftp server. The streamreader works fine until the file is more than 100,000 bytes long.It reads until it reaches this point and then just ends. No error message, it just reads to this point which happens to be 2 fields out of 6 in the database stream. My question is - does the streamreader have a limit? And if so what is a workaround?

Dim connString As String = "Data Source=" & pDataBase
conn = New SqlCeConnection(connString)
Dim strQuery As String = ""[code]......

View 4 Replies

StreamReader/Writer - Loads An Entire Text File Into A Streamreader Variable

Jul 9, 2009

I'm writing a program that basically loads an entire text file into a streamreader variable, then reads this variable line by line and parses and writes a line into a new text file. I'm VERY new and my knowledge is mostly self-taught, but I can't seem to get out of this one. It works for smaller files, but it appears to reach a limit in characters at some point because in a file of 900 lines, it stops writing about halfway through 800 and there are no errors, the program actually completes and the message box pops up.

There are a few things with this code I already know I should fix, such as creating the new text file name, it's messy, I just don't know how.

Private Sub btnProcess_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnProcess.Click
Dim IndexValues As String()

[CODE]...

View 10 Replies

Auto-refresh Database Record When Other User Insert A Records

Jan 12, 2011

there are two computer connect to one shared database one of the user (user1) will insert new record then the records in (datagridview) of the user (user1) who insert the record will be 11 record but the(datagridview) of other user (user2) will still have 10 record.what the possible way that may allow me to refresh the records..Also how I can make a new record in datagridview of the user2 can be colored by yellow or red back color.

View 2 Replies

Insert / Delete / Edit / Search Records And Connection With Database

May 12, 2010

how can i access the sql server express database table in vb.net on forms to insert records,delete records,search records,edit records.I have made table by using visual studio.

View 5 Replies

DataTableAdapter.Update Doesn't Insert New Records In The Linked Access Database

May 20, 2010

I am writing an application that does a number of different things with data downloaded from hardware which is monitoring the power used in my home and produced by my PV Solar array. I have run into a roadblock early on, because I cannot seem to get new data into an Access database that I have linked to my application by means of a DataSet. I have checked the DataAdapter's InsertCommand, DeleteCommand, and UpdateCommand definitions (created by the DataSet Wizard), and they seem to make sense, and nothing is throwing exceptions or otherwise making VB complain, but new rows added to the dataset are not being added to the database.

[Code]...

View 1 Replies

Unable To Read Records From Local MS Access Database

Aug 27, 2008

I am a Visual Basic Programmer and presently migrating our applications to Vb.netQuestion : I need to access the records from a MS Access database to the Text box or for some user login validation using vb.netso i coded to give a message box if any row is returned by the connection.but its not all selecting any rows even though i queried as "Select * from <Table Name>"also i am unable to debug it.....I am attaching th code snippet used along with this mail.plz revert back if there is a solution.[code...]

View 6 Replies

Read Number Of Records From XML File?

Mar 27, 2012

I'm working with XML for the first time and I'm not able to read the number of records from an existing files. As of now I have my records this way:

-<DataNodes>
-<Data>
<numOne>25</numOne>

[Code].....

View 6 Replies

VS 2008 Read Rows From A Database File (.wdb) To A Datagrid?

Dec 29, 2009

I need to read rows from a database file (.wdb) to a datagrid. It's a cache file for world of warcraft or a database file for MS Works.

[URL]

View 4 Replies

VS 2008 Opening From A Text File Using Streamreader?

Jun 11, 2009

I have been working hard lately to build a database and well i have been experimenting with SFD, OFD and lately Streamwriter. I have finished and got streamwriter working as i want it to but know i need to be able to open the text file where all the data is stored into the one label, and not have certain pieces of text.I have attached a example of what the writer makes. The text which i would like removed when i open it is indented to the right

View 29 Replies

Read Multiple Text Files In A Folder And Insert Them Into The Database?

Mar 20, 2009

I have many text files in a folder. What I can do now is to read through one text at a time and insert it into the database. My little app reads a text file when I debug it. So, I need to run it several times to read all those text files and import them into the database.

My question is how to read multiple text files inside a folder at a time. Here's my code which works fine but it reads only one text files at a time.

Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
Dim filelocation As String filelocation = "F: xtfilesch25.txt" Dim chid As Integer chid = 25 'read from file Dim MyStream As New StreamReader(Path.Combine(Application.StartupPath,

[code].....

Obviously, I need a way to loop through a folder and check if there's text file. But I cant get it right.

View 2 Replies

Insert Records Into One Table Using Records From Other 3 Tables?

Mar 27, 2012

I have this piece of code wich works perfectly when inserting records into one table using records from another table. My question is that now i need to create another table by using records from 3 other tables (tables are related). Can i use aliases on the column names, like on Oracle SqlPlus? How will be the syntax of the 'INSERT INTO SQL statement?

Dim MyConn As ADODB.Connection
Dim MyRecSet As ADODB.Recordset
Dim tmpSQL As String
MyConn = New ADODB.Connection

[code]....

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved