VS 2008 When Copying App It Doesn't Update With Latest Version
Apr 29, 2010
I want to enable auto updating on my vb app.So I got Project--> Properties--> click the Application tab. Click the Assembly Information button --> Update the Assembly version. Then click ok.Then I build my app. Then I click the Publish Wizard. I specify the location to publish the app. It is an ftp folder.Then I click Next.It asks how will the user Install the app.I select FROM a CD-ROM.then I go next.It asks where will the app check for updates.I specify the same ftp folder.then I go finish. And it publishes to the ftp location.Then I get the setup file from that location and run it on my pc. It loads my app fine. then I build and publish again. But when I copen my app it doesn't update with the latest version.
View 18 Replies
ADVERTISEMENT
Feb 17, 2009
is the a program or a script that will allow people to click a button or something on a vb 2008 program and it will connect to a server and update it to latest version?
View 1 Replies
Jun 24, 2010
I have a XML file with the latest application version number, I have this loaded into a variable, how can i compare this against the application.info.version to see if it's the latest version??
View 3 Replies
Oct 12, 2011
Whenever I build my VB.Net project, the Assembly version does not automatically update as it is supposed to with the * in the third box in the Assembly Information. The only way I have found to (sometimes - it doesn't always work) get the version number to update is to Clean the Project, remove the *, Rebuild, reClean, put the * back in, and Rebuild again. What could be causing this issue to happen?
I should note that my coworker reports no such issue on his machine when Building the same Project; also, I must admit to some confusion on my part as to how this behavior is even possible, given that the error persists even if I remove every possible intermediate file I can think of that could possibly even be carrying the old version number, so how does it even know the old version number?
View 3 Replies
Jul 24, 2009
I would like to get latest version of the assembly. how?
View 3 Replies
Nov 7, 2010
I am not sure what is the latest version of the workshop.url...
View 2 Replies
Jan 23, 2009
I have a radio program.
I can play radio station in it. This is my question: How can I check for latest version on a FTP server?
View 2 Replies
Aug 12, 2009
I've defined two numbers. ThisVersionNumber and LatestVersionNumber, I want to compare them, and so if ThisVersionNumber = < LatestVersionNumber it will show a dialogue.
How do I receive the latest version number which is hosted at [URL]
View 10 Replies
Feb 23, 2009
We have one program that acts as a "server" (so to speak) and many programs that reference it. every time we update the server, we are forced to update all the dependent programs to reference the new version number. Our IPC communication protocol is pretty stable and doesn't change, so we aren't worried about upgrade incompatibilities. I would like to know how to automatically reference the "latest" version of an assembly. What I mean is, if I choose Project->properties->references, I always get a specific version. Is there a way to reference whatever the latest version is? This way, we wouldn't have to update every program that is dependent on our server every single time there is an update.
View 1 Replies
Apr 25, 2010
I have a VS2010 solution (upgraded) that has two projects, an EXE and a DLL. In both the Target framework versions are 4.0. When one look at the references of the EXE project, one can see that the System.dll (and System.Core.dll and so for) references to the v4 version (the latest); however, in the DLL project the references points to the .Net Framework v2 version. Why is this happening? How can I make all my projects to point to the v4 libraries?
View 3 Replies
Nov 10, 2010
I have this situation where LoadWithPartialName appears to be the only good alternative, although it is marked as Obsolete. I work in a very tight dev environment with versioning and deployment policies that cannot be easily changed or bypassed. Let's say there's a .NET executable that I have no control on (from another division). Let's call this the client AppA application. AppA's version is 10.11.12.x. Application AppA has a direct reference to one of our class library that provides some service to the caller (returns some information).
Let's call it SvcB and the version is also 10.11.12.x. Now, AppA's division does not need to update their system as often as we do, so AppA's version will stay 10.11.12.x for some time, probably until we decide to change the format of the class that is exchanged between us. Our division needs to change the logic behind the service SvcB more often and the version must change with every major deployement.
So let's say we change the logic and we deploy a new version of SvcB, 11.02.11.x. AppA will still reference the old version, so the logic being used is now incorrect. We are thinking of creating a new "facade" to our service. Let's call it SvcFrontB. SvcFrontB's version will stay the same, in sync with the AppA's own version. Now I need SvcFrontB to load the most recent version of SvcB through reflection. This way, I am sure the latest logic is always used. How do I achieve that without using LoadWithPartialName ?
View 2 Replies
Mar 11, 2010
i use VS 2005 ,so it use ,net framework 2.0 ,so if i look to ,net framework that i have in my computer i see 1.0 1.1 2.0 3.0 and 3.5 so my question is is VS 2005 automatically use the latest version of framework in my pc or i should do it manually ,and if manually how i do it?
View 1 Replies
Feb 3, 2009
I have developed a small application in VB.NET 2008. It uses .net framework 3.5. But somehow it also runs in computers with .net framework 2 or 2.5. Is there a way to determine thru code what is the latest version of .net framework the pc is running. This way I can give a warning message box that the required framework is not installed.
View 7 Replies
Jul 14, 2011
I've run into a problem that I'm at a loss to understand and/or work around. I'm working on a settings page that updates an XML file. The page has an XmlDataSource with a transform file (to filter and sort the values) and a DataList that is populated from the XmlDataSource. A user can enter a new group name into a text box and click a button to submit the form. When this happens, the new value is successfully added to the XML file.
[Code]...
View 1 Replies
Dec 12, 2008
We have an IT Management System that we built in house and it scans all of our computer to get hardware and software information.One of the key bits of information it used to report back was Computer Manufacture and Serial code (although didn't work on every machine). We achieved this by running an external utility (PCPBIOS.EXE) and reading in the results to get the information we required. However this tool does not run on x64 bit machines.
I tried searching for a x64 bit version of PCPBIOS and there doesn't appear to be one so I was wondering if anyone can point me in another direction. I know there is WMI but from what I have been reading online this does not provide the SMBIOS information correctly. If this is not the case I could get WMI working for that (we are already using WMI for other information).
View 1 Replies
Nov 26, 2009
I have a dataset with a number of data columns, due to sizing issues I've updated a number of the varchar columns from say VARCHAR(20) to VARCHAR(50).I'd like the DataTable to automatically grab the new column information, is this possible? I'd rather not go through each column in the table and update the length.
View 1 Replies
Aug 16, 2010
Actually i have to update a software daily on 20 computer and connecting to internet kill my ADSL connection. i would like to download the file on my server and then schedule a task to pick it up from the server share folder.how i can write this script and then put it on the 20 computer so that it come to check the folder on the server then update to the latest file?
View 5 Replies
Mar 31, 2009
How they relate and differ from each? What are the best practices for version control? Is there a primer about publish online? Or a good book?
And is it possible to make ClickOnce and a msi in one solution of VS 2008? If so, is there any conflict or pitfall?
BTW I am using VB if that makes any difference.
View 1 Replies
Jan 3, 2011
Now it updates when I press the update button and then it displays the data like it has updated the database, but when I close the program and run it. It displays the data as not updated WHY DOESN'T THE DATABASE UPDATE?Same with the Add and delete commands, I've almost finished my program but there's always a problem :...
Dim StudentID As Integer = Me.Lst.SelectedValue
Dim con As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|StudentTeacherDB.mdf;;Integrated Security=SSPI")
[code]....
View 17 Replies
Nov 16, 2011
I've got a question below:load data from a table in database into a datagridview,make change in datagridview,and use update function to update change back to tablebut 13 changes, only 12 being update back to databaseonly the top row on the datagridview not being update??
For Each orow As DataGridViewRow In DataGridView1.Rows
orow.Cells(1).Value = TextBox1.Text
Next
[code]......
View 14 Replies
Jun 21, 2011
I'm attempting to create an app which uses a vendor-supplied Web Service. They provided sample code to show how to work with the Web Service, but all the code is in C#.. not a huge deal.I opened one of their demo projects and it compiles fine, works perfectly.
So, I open up MY project, drop in the converted code and... wait for it... ERROR!Here is the working C# code that IS working:
C#
private void DoSomethingWithTheAlarm(G4T.enAlarmAction action) { XML_AlarmClearRequest[] ClearRequest = new XML_AlarmClearRequest[lstAlarms.SelectedItems.Count]; int idx = 0; foreach (ListViewItem lvItem in lstAlarms.SelectedItems) { ClearRequest[idx] = new XML_AlarmClearRequest();
[code]....
View 15 Replies
Feb 18, 2011
I am using an update panel and when I click a button it will update all the panels. updapanel1.update() is very simple, but my data is not updating unless I hit the button twice. My gridviews shows data for a selected user, and then all the grids reflect that users data. works fine all the update panels work for the gridviews. Now for somereason when i try to do a row count and update the panel with the summary, it does not work, i get either the previous users summary or if i hit update again for the same user i get the correct data.
[Code]...
View 1 Replies
Jul 21, 2010
I have a gridview that is set to a sql datasource, it is generating the columns automatically. If I add a column to the table it is referencing, it will draw that column and display it, but it does not update the insert/update commands to include the new column. Is there any way have it rebuild those commands automatically?
View 1 Replies
Nov 5, 2010
Public Sub UpdateStaff(ByVal sr As StaffRecord)
Dim oldSr As StaffRecord
Dim q = From staff In db.StaffRecords Where staff.Employee_Number = sr.Employee_Number Select staff
oldSr = q.First
oldSr.Address_Line1 = sr.Address_Line1
[Code]...
The helper function I have written seems to do everything I want apart from update the db. Stepping through the code, the oldSr is updated by the new sr parameter but no update on submit changes.
View 2 Replies
May 27, 2010
[code]The query executes fine but the problem is that when this query executes, it doesn't update the percentage field. What might be the problem?
View 2 Replies
Sep 1, 2010
I have created a license system for my application with MySql about half a year ago. What it would do is take the serial number and send it to my server if the key was correct it would return a 0 if its wrong the return value would be a 1.The problem was that when the serial number was entered correctly my program would create a "fake file" for example vb.dll in the system.And on run time my program would check for that vb.dll if the file exist it would skip my trial program and run the app as a full version. Half year later i think creating a "fake file" and checking for it on start up is extremely wrong and that's not very good security.How can i check the difference between a full version and unregistered version?
View 23 Replies
Jan 29, 2009
This is what I have for code:
Private Sub restoreDatabase(ByVal dbName As String)
Dim newDbName As String
newDbName = dbName.Substring(dbName.LastIndexOf("_") + 1)
My.Forms.portfolioGenerator.Close()
[Code] .....
It seems like it should be pretty simple, I take in a file name as a parameter, create a new name for it, delete it, then try to copy it back from an older version of the same file, and update the connection string. However, it continually tells me that "The file 'filenamehere' already exists." If I set overwrite to true then it goes through just fine, except it doesn't actually copy the file. Obviously I also check the folder, and the file does in fact Not exist...I've also checked all the file paths and what-not, they are all accurate.
View 3 Replies
Oct 20, 2009
I have a button inside of a gridview's template field. Onclick i want to the button to open up a modal popup while force updating the updatepanel and formview inside the modal popup because the formview's datasource depends on a hidden field in which i am setting after click also.
[Code]...
View 1 Replies
May 8, 2012
how to set/update the exe file version, can't seem to find it in the project properties
View 2 Replies
Jun 18, 2010
I am working with an ArrayList of ArrayLists. Every time I add a new ArrayList to the main AL, it replaces all previously added ALs with the new one.Here's an example
Dim al As New ArrayList
Dim al2 As New ArrayList
Dim list() As String = {"one", "two", "three"}
[code].....
I would expect the Final line should be "Final: one, two, three" but that is not the case. And if I pause and check my ArrayList (al), it shows 3 items, that all have "three" in every spot which is what the last AL I added looked like.
View 2 Replies
