Whenever I build my VB.Net project, the Assembly version does not automatically update as it is supposed to with the * in the third box in the Assembly Information. The only way I have found to (sometimes - it doesn't always work) get the version number to update is to Clean the Project, remove the *, Rebuild, reClean, put the * back in, and Rebuild again. What could be causing this issue to happen?
I should note that my coworker reports no such issue on his machine when Building the same Project; also, I must admit to some confusion on my part as to how this behavior is even possible, given that the error persists even if I remove every possible intermediate file I can think of that could possibly even be carrying the old version number, so how does it even know the old version number?
I want to enable auto updating on my vb app.So I got Project--> Properties--> click the Application tab. Click the Assembly Information button --> Update the Assembly version. Then click ok.Then I build my app. Then I click the Publish Wizard. I specify the location to publish the app. It is an ftp folder.Then I click Next.It asks how will the user Install the app.I select FROM a CD-ROM.then I go next.It asks where will the app check for updates.I specify the same ftp folder.then I go finish. And it publishes to the ftp location.Then I get the setup file from that location and run it on my pc. It loads my app fine. then I build and publish again. But when I copen my app it doesn't update with the latest version.
I am using an about Box in my program and the version number doenst change.Its 1.0.0.0.0 , does anyone know how to sink the version number in the box with the version number being published.
I'm attempting to create an app which uses a vendor-supplied Web Service. They provided sample code to show how to work with the Web Service, but all the code is in C#.. not a huge deal.I opened one of their demo projects and it compiles fine, works perfectly.
So, I open up MY project, drop in the converted code and... wait for it... ERROR!Here is the working C# code that IS working:
C# private void DoSomethingWithTheAlarm(G4T.enAlarmAction action) { XML_AlarmClearRequest[] ClearRequest = new XML_AlarmClearRequest[lstAlarms.SelectedItems.Count]; int idx = 0; foreach (ListViewItem lvItem in lstAlarms.SelectedItems) { ClearRequest[idx] = new XML_AlarmClearRequest();
I am using an update panel and when I click a button it will update all the panels. updapanel1.update() is very simple, but my data is not updating unless I hit the button twice. My gridviews shows data for a selected user, and then all the grids reflect that users data. works fine all the update panels work for the gridviews. Now for somereason when i try to do a row count and update the panel with the summary, it does not work, i get either the previous users summary or if i hit update again for the same user i get the correct data.
I have a gridview that is set to a sql datasource, it is generating the columns automatically. If I add a column to the table it is referencing, it will draw that column and display it, but it does not update the insert/update commands to include the new column. Is there any way have it rebuild those commands automatically?
We have an IT Management System that we built in house and it scans all of our computer to get hardware and software information.One of the key bits of information it used to report back was Computer Manufacture and Serial code (although didn't work on every machine). We achieved this by running an external utility (PCPBIOS.EXE) and reading in the results to get the information we required. However this tool does not run on x64 bit machines.
I tried searching for a x64 bit version of PCPBIOS and there doesn't appear to be one so I was wondering if anyone can point me in another direction. I know there is WMI but from what I have been reading online this does not provide the SMBIOS information correctly. If this is not the case I could get WMI working for that (we are already using WMI for other information).
Public Sub UpdateStaff(ByVal sr As StaffRecord) Dim oldSr As StaffRecord Dim q = From staff In db.StaffRecords Where staff.Employee_Number = sr.Employee_Number Select staff oldSr = q.First oldSr.Address_Line1 = sr.Address_Line1
[Code]...
The helper function I have written seems to do everything I want apart from update the db. Stepping through the code, the oldSr is updated by the new sr parameter but no update on submit changes.
Anyway, I'm primarily a web developer so I'm only really fluent in PHP and everything else it entails.For my assignments the examination board suggests Visual Basic, so I'm just needing a little help as I'm not too great at it yet. [code] How could I ensure it generates a number 1-13 BUT doesn't ever generate a certain number, e.g. generate a number 1-13 but NOT 7.
I have a button inside of a gridview's template field. Onclick i want to the button to open up a modal popup while force updating the updatepanel and formview inside the modal popup because the formview's datasource depends on a hidden field in which i am setting after click also.
I want to get the major, minor, build and revision version numbers of an EXE, not my vb project.If I do:
FileVersionInfo.GetVersionInfo(sEXEFilePath).FileVersion I get 11.00.00003 It seems to have combined the build and revision numbers into one. In the good old days,
i am using WebBroswer object in Vs2010 but it doesnt display some of scripts like flowplayer. i tried in internet explorer its ok. i think i cant use all features came with ie How can i update webbrowser to solve this problem? i cant see it in vb. cant work [URL]
This is probably an easy question: I need to change my version number from 5.4 to 5.5. This is not the assembly version, but the version (I think) of my executable.
I need to display the version number of the application on the top bar of the application. I managed to crate a setup wizard but I have no idea how to manage the verions.
I have written a small program in VB 2010 Express and I would like to show the version number of my program on the form. I looked through the HELP files and found an example. I put the example in my code like this:'Get the version of the current application.
Dim assem As Assembly = Assembly.GetExecutingAssembly() Dim assemName As AssemblyName = assem.GetName() Dim ver As Version = assemName.Version Me.Text = "1st CPC Check Deposit Program Version" & " " & ver.ToString
I am up to version 1.0.0.8 but this is what prints:
I've defined two numbers. ThisVersionNumber and LatestVersionNumber, I want to compare them, and so if ThisVersionNumber = < LatestVersionNumber it will show a dialogue.
How do I receive the latest version number which is hosted at [URL]
You can get the version of your application sing My.Application.Info.Version. Is it also possible to set this version using code? This because I have a webservice that connects to a database and retrieves a version number.My application then compares that version number with his one, if it's old.. then it will download new files and change his version number.
is the a program or a script that will allow people to click a button or something on a vb 2008 program and it will connect to a server and update it to latest version?
I have several programs written in VB2008 on a network shared drive. Multiple PC's which have access to this drive run the programs. The problem is when I want to upgrade the program or a file/picture with changes, either I cannot overwrite the .exe file because someone is running it, or for example, a background picture on an open form is loaded and then I cannot change the picture on the server. I thought of placing a timing loop in the programs to frequently check a file on the server, which when I need to make a change, I can fill with an appropriate trigger word (like "exit") that would have the program terminate and be unable to restart until I change the file to "OK", but this seems rather crude. I assume there's a better and more elegant method.
I need to get the current install version for several apps installed on my machine (The same thing displayed in the Add/Remove Programs list)....how do I get this version info programatically?
I'm doing a form to add/edit/delete values from a data catalog. everything goes fine but the Radgrid doesn't update after Submit Button is pressed in the edit/new dialog. i did it before in a more complex form but i can't figure exactly what's wrong.
in the update the data where the new data will be overwritten dissapears after postback. (i have a way to solve this)
mnlib is a library of my authorship to deal with common tasks i know that queries with strings like {$database_name} is not a standart practice, and probably is not recomended, but i have to deal with it . i'm doing almost everything programatically some of the code is ommited because character limit in post Updated: Reduced code, i'm afraid if keep reducing code, i will eventually delete something important to the iusse