I recently got 102 errors specifically with the designer. I have added the code below:And was surprised to find so many errors.The interesting part was that this problem invoked simplify by adding that line. I did not change any of the elements on the form. And the code above is working with I/O not the design. [code]I also can't view the design of the application itself. I have a backup of the design forms. Should I replace them?
View 2 RepliesI'm using this code for encoding with wme.
No erros but if I rn the app vshost.exe stops working.
Its somethignw ith the DEP?
Imports WMEncoderLib
Public Class Form1
Dim WithEvents MyEncoder As WMEncoder
Dim MyProColl As IWMEncProfileCollection
[code]...
I am attempting to update an existing winforms application, that was created with a dataset control on all the winforms pages. I have ported it from VS 2008 to VS 2010 and I need to update the database section and connect it to the SQL backend using traditional code method.In the Solution explorer, when I click on the Dataset files, and click "Exclude From project" I am unable to build the project.Is it advisable to comment out the code lines that refer to the dataset in the .designer.vb files?
View 1 RepliesI just made a bunch of changes to my program, so I can't just undo what I did. My main form gives me the following error every time I try to load the designer:
Warning1Value cannot be null.
Parameter name: objectType
I have rebuild the project with no success. A few other posts have mentioned that there could possibly be a reference to a button or image that no longer exists, but I have no idea which one.
Also, I don't really know what the information below means, but it shows up on the error page under 'call stack', so I figured I would include it
at System.ComponentModel.TypeDescriptor.TypeDescriptionNode.GetRuntimeType(Type objectType)
at System.ComponentModel.TypeDescriptionProvider.GetRuntimeType(Type reflectionType)
[Code].....
i have several forms in my solution that have listview controls and each of those listview controls uses the ListViewColumnSorter class that's provided on MSDN. This class requires a few lines of code in the Form_InitializeComponent Method of the Designer.Problem is, each time something on the form is changed, even if it's just a property of one of the controls, the designer deletes the code that I have for the listviews and I have to go back in and add it again.
View 4 RepliesJust wanted to know if you had some design code which was created, and that is all you have. Can you open this designer code and create the actual working main Form from this? I don't need this designer code for any specific task, just wanted to know if there is a command within VB Studio 2010 that creates the actual Form from the design code. For example; The following piece of designer code is for a simple program that finds the Circumference of a Circle.
[Code]....
What is a standard way to open the Designer (automatically generated) code for a VB file?
As a workaround, I can get to it by searching the entire solution for some keyword that is usually only found in those files: Global, Partial, etc.
how to make a flow chart designer? where i can drag n drop modules and create link between them...
View 3 RepliesI have a TreeView with several nodes that have child nodes. Whenever I create a child node, it sets the image to a seemingly random icon in my ImageList. There are a couple of properties for the TreeView that have this icon, but nothing happens when I change it to a different one. And besides, it won't let me set those properties to "None."
I tried look at the properties of the child nodes, but everything is set to none and nothing changes. Does anyone have any ideas? In the photo below, you'll see the Internet Explorer node and its child nodes that have the Chrome icon. I need the child nodes to be blank.
I have a TreeView with several nodes that have child nodes. Whenever I create a child node, it sets the image to a seemingly random icon in my ImageList. There are a couple of properties for the TreeView that have this icon, but nothing happens when I change it to a different one. And besides, it won't let me set those properties to "None."
I tried look at the properties of the child nodes, but everything is set to none and nothing changes.In the photo below, you'll see the Internet Explorer node and its child nodes that have the Chrome icon. I need the child nodes to be blank.
I am creating a UserControl with rich design-time support that should eventually look like the Options window in Visual Studio (or many other applications). Basically a split container, to the left is a TreeView with 'option categories', and each node in the treeview corresponds to a 'panel' to the right with certain options.
Just for terminology, the nodes in the TreeView are OptionsNode objects, the panels (containing the controls that determine the options) are OptionsPanel controls. My UserControl itself is called OptionsView and is the control that contains the treeview as well as a panel that contains the OptionsPanels.
I have some experience in design-time coding, and I have gotten pretty far. The OptionsView control contains a property Panels that returns the ControlCollection of the right side of the split container. The user can add/remove OptionsPanels via this property (and automatically an OptionsNode is created). The property uses a custom CollectionEditor that tells the designer to create instances of type OptionsPanel (instead of just Control which is the usual collection type of ControlCollection). Furthermore, in the CreateInstance method I use the DesignerHost object and its CreateComponent method to create the panels, instead of just creating New OptionsPanel objects. This way the OptionsPanel created is selectable and editable (via property grid) during design-time:
vb.net
Protected Overrides Function CreateInstance(ByVal itemType As System.Type) As Object
If itemType Is GetType(OptionsPanel) Then
[Code].....
what account for this error message in ls beta 2?'' The last change wasn't successfully persisted.Please shot down the running application.
View 1 RepliesI'm writing a custom control and I want to add a "MessageText" property of type String:
<Browsable(True),
DefaultValue(""),
Category("CustomControls"),
[code]....
The MessageText property is a multiline text, and the user must be able to set the text using the designer. The problem is that the designer doesn't allow to enter a newline directly for a string property.I want the same behaviour as the system TextBox's Text property, where you can click on the down arrow and write lines in the small text-editor that appears:How do I do that?
I'm looking for a control that allows images to be placed onto it and moved about. Moreover, I need to draw lines between the images. It will sort of be like the query designer in SQL Man Studio. It will be used as a virtual desktop where a variety of objects (and their icon representations) can be freely placed and moved. I'm having a blank and cant remember where I saw this before.
View 2 RepliesI've inherited a large Visual Basic project that has a number of "frames" (obviously, it came from Visual Basic 6.0) which are now GroupBoxes. They all cover the entire form. The program chooses which one to display during execution. That all works fine.
Is there a way to switch between them for display in Visual Studio designer? Now it's displaying only the last one added, and I have to go to the code rather than Toolbox to make changes to all the ones behind the top one.
Long story short I made a form in VB.Net project which involves lots of icons and images. My problem is when I build my project, and then go back to that form, suddenly errors showed up.
The errors says : "The type 'MyProject.MyResources.Resources' has no property named 'myicon'". Just to be clear, it worked fine before I did the build, and it happened to every single images I have on Resource.
When I chose "Ignore and Continue" all of the images I used are gone. I tried to googled it, some says to delete my .exe file on Application/Bin/Debug folder, which is working. But this issue has been some kind of an annoying one, since it happens again every single time I build.
Created MyLitsBox project as described in Michael Halvorson's book MS VB 2010 Step by Step book. Tip box on p. 89 says to make programs more robust embed images into application rather than use absolute path names to link images into the application. Searched on Halvorson's recommendation "How to: Create Embedded Resources" and found the info at: [URL]
OK. As usual the most difficult thing is finding the menu item, etc., the instructions direct you to. Do the people who write these instructions ever try using them?
xxxxxxxxxxxxxxx
Instructions are as follows
To edit a resource by using the default editor
With a project selected in Solution Explorer, on the Project menu, click Properties.
Click the Resources tab.
On the Resource Designer toolbar, point to the resource view drop-down, click the arrow, and select the type of resource that you want to edit.
Double-click the resource to open the default editor for that resource type.
In the Properties window, select the Persistence property and change it to Embedded in .resx.
My self and most everyone else on our team is having the same issue with VS2008. The designer will not render many forms in designer mode. Currently I am getting this error "The type 'Team.CAD.UI.My.Resources.Resources' has not property named 'view_16'" Well veiw_16 is in the resouces file.
View 2 RepliesI have read previous post going back to 2007 about not having XML Designer. It is now almost 2010. I have installed VS2008 Professional and am writing code in VB. When I add XML Schema to my project I don't get the XML Designer. Is it there somewhere? If so, where?
View 3 Repliesi want to see the designer code .. i want to see how myForm is generated using or extending form i mean in C# i can see the code in designer.cs file...but in vb.net i am nt able to see that..
View 1 RepliesI have a class that inherits the Windows Forms Combobox.The class should do extra work when items are added, but there is no such event.Therefore, I have added methods to add and clear items, which do the extra work.To avoid developers accessing the Items directly and adding to them, I have overloaded the Items property to throw an exception.This all works fine, except in the VS designer. The designer tries to access the Items property, gets the exception and shows an error.Is there a defined constant for when the VS designer compiles the code? This seems like it would be best suited to the task.
View 1 RepliesI have MonoDevelop working, and so far it's been really good. The only thing that seems to be missing is the GUI designer.
View 2 RepliesI wanted to know what 'Fields' are in the Class Designer.
View 11 RepliesI was busy with a project, i'd thought I take a pauze of an hour I closed my computer. Now I open my project I have my wirtten codes but I can't see the designer anymore.. what can be the problem and how to get it back?
Edit: I can debbug :S But I can't design
I use MS visual studio 2010. I did open designer and view the form for the same file A before. But after some small changes, I can no longer view the form designer.vb, but can only view code in designer.vb. Even if I go back to the original source, I still can not open designer!!
The error is: The designer could not be shown for this file because none of the classes within it can be designed. The designer inspected the following clsses in the file A-The base class BaseClass could not be loaded. Ensure the assembly has been referenced and all that projects have been built.
[Code]...
When using the Dataset Designer in VS 2010 I add a new query.It adds with no issue.Add another,starts to hang. Add another and now it can hang for hours.I use task manager to kill VS 2010 after 30 minutes.Go back into the same table adapter query, modify it, save it.Works in seconds.Add another query, hangs, hangs, hangs.I have seen posts about this going back to VS 2008.I have No Add-Ons loaded, what is causing this issue??
View 2 RepliesI have a program I have been working on, I was coding kind of late tonight and getting sleep. I saved my work and closed the program, but I did something wrong when I saved it. I accidentally saved it to a different folder then the one I was originally using.
View 5 RepliesI need some assistance again. In my previous posts, I asked about a good book to start learning how to us VB 2008.I had numerous replies, so I thought starting with Visual Basic 2008 would be a great start.As I am reading the book everything had mad sense up to Chapter 4. It's a simply program, and I thought I understood everything, until the middle of the chapter. So here's where I need help, and someone to explain my error.The author explains to place a Label & DateTimePicker onto the form, which I did. I renamed the label to NextWeek and DateTimePicker1 to DateChooser.Furthermore, I proceed to double click on DateChooser, which VB provides certain code automatically.[code]
After a few pages of reading, the author stated to put the following code under
Inherits class definition.[code]I went on and put the remainder of the code, which similar to the following:[code]The designer cannot process the code at line 51:Me. AutoScale Dimensions = New System.Drawing.SizseF(6.0!,13.0!)The code within the method 'Initilze Components' is generated by the designer and should not be manually modified. Please remove any changes and try opening the designer again.
I'm recently writing an app that is localizable and have several lauguage resources built within VS 2010 SP1. But now I came into a problem -- it seems that VS has modified one of the Designer.vb unregularly.The problem reveals like this. Whenever I want to change the main form's Language from Default into fr-CA (for eg, and with Localizable true), and after I save or run the project, then VS shows me with dozens of a same errors: 'Resources_ fr_ CA'is not a member of 'myApp'. The amount the this error I guess is depend on the number of controls on the form, but I'm not quite certain about that.Then I looked into the Designer file and found strange lines that were suddenly added by VS, they are somelike this two, not all these but commonly:[code]
The problem used to happened several times and it was passive before cos I can remove the lines one by one, using a text editor from outside. But now it is total nightmare, because, now whenever I set Language into French, the same problem MUST happen as saving the project. I can not debug or develop it with local language again, that is not any more a joke is it?
i am new to vB I want to make a new project in VB using RADvolution Designer a simple form to enter data.
View 1 Replies