VS 2010 Borderless Child Maximized Still Has Controlbox
Aug 11, 2011
I have an MDI parent form and multiple child forms. Child forms are borderless and set to start in the maximized position because I want the forms to completely fill/resize within the parent form and only display the selected form, one form at a time.
Problem I have is whenever I load a form it puts another bar at the top of the screen and another control box. Is there any way to get the child forms to load in maximized state without this bar? I tried .controlbox = false and it gets rid of the control box but the bar is still there.
Note: I am working with Visual Studio 2010 Professional. Note: There are a lot of MDI Child posts, but none (that I have found) that apply to my scenario... Scenario I have an MDI form with a UserControl docked at the top. The UserControl is for navigation and is ~50 pixels in height. When I show a child form with its WindowState property already set to 'Maximized', the child form shows maximized in the MDI parent, but behind the UserControl.
I have an MDI container and many child forms Most child forms are maximized. how to remove the caption bar,control box, minimize, restore/maximise and close buttons. I can stop some of them from working but not all, so ideally I would like it gone.
I have a series of MDI child forms I page through to present learning material, all of which are borderless and framed within a main interface form. Each form has its FormBorderStyle set to None, and the form's Text property is blank. I am loading each fom on demand, rather than setting up a stack and pushing one to the front, as this is simpler for me with my limited programming experience.The problem is that as each form is opened/shown, the border briefly flashes in the centre of the ParentForm before docking in the top left corner as programmed. I have even tried coding the Form's Load event to make sure the border is set to None, as shown below:[code]This makes sure there is not a brief delay between the old form closing and the new one showing.
When my MDI child loads, its maximized. This makes it display an icon on its top left conner in the parent's toolbar. Is there any way i can do away with this default, MS icon!!
Is there away to prevent an MDI child form from being auto maximized?
The problem I have is this. I have an mdi application that contains 2 mdi child forms. When I show the first form and maximize it so that it fills the mdi window I can't load the second form non maximized.
Vb.net automatically maximizes the second form despite the fact that I didn't tell it too! If I then restore the second form to its normal size it then does the same with the first form. This is all very strange to me. When you maximize one form inside an MDI window it maximizes them all.[code]...
I have an MDI Form that contains an MDI Child form. On this child form is a flexgrid. When the user double clicks on a row in the flexgrid this loads another MDI Child form. I have set the following properties on the second child form:
The problem is that if the first MDI child form is in a maximized state and the user double clicks on the flex grid, the second child form loads in a maximized state too! How can I stop this?
I have an MDI Form that contains an MDI Child form. On this child form is a flexgrid. When the user double clicks on a row in the flexgrid this loads another MDI Child form. I have set the following properties on the second child form:
I'm trying to make a borderless form. I chose a dark red color as a backcolor and as a transparency key. I made my own dragable title bar, my own close, minimize, maximize and restore buttons and all that stuff. BUT, in order to imitate the Microsoft Windows' style perfectly, I tried to copy that outer glow that Microsoft has:I had to add an outer glow to my form in Photoshop and save it as .PNG. Here's what happened:The dark red became darker under the influence of my outer glow, and it was not considered a dark red anymore. How can I get rid of that?
I am developing a application where I have 1 parent from (windowstate of Parent from is set to Maximized) and 2 child forms. In my Parent form I have a menustrip with following code to activate child -
I have a little "designing" problem in VB 2010. So, I made a cool abstract background for my application in Photoshop. And I wanted to make the form transparent and BorderLess. But, in order to imitate Windows, I also had to put in a very small black outer glow. So, I made the BackColor in a DarkGreen, then the same for the TranksparencyKey. BUT, because of the outer glow, now it looks like this:
I have a Windows Form Application to which I added a splash screen created using the splash screen template. I also added an MDI Parent Form. In my project properties, I chose the splash screen and the MDI Parent as the loading form.
I want the MDI Parent to load Maximized, so I changed the WindowState Property in the list to do just that. Now here is the problem:
If I leave the WindowState set to Normal, the splash screen loads, does its thing, closes, then loads my MDI Parent just like it is supposed to, BUT, if I set the WindowState of the MDI Parent to Maximized, the splash screen displays for about a second, the MDI Parent loads on top of the splash screen, and the splash screen finishes in the background and then closes.
I tried giving Focus back to the splash screen in the Lost Focus event but that didn't work. I know splash screen is still open and working when it gets covered up because I can hit ALT+TAB and see it just before it closes on its own like its supposed to. I also never adjusted any of it's time settings or any other settings.
How do I keep the splash screen on top while my MDI form is Maximized? or how do I delay the MDI until the splash screen has done its job? I dont understand why I am getting this result.
I have 1 form as parent MDI (frmParent.vb) and have 2 child form (frmChild01.vb & frmChild02.vb).the code for parent form as per below.
Public Class frmParent Private Sub OpenChild01ToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenChild01ToolStripMenuItem.Click Dim child01 As frmChild01
[code]....
My problem is how can I set label1.text in frmChild02.vb when user click button1 in frmChild01.vb
I was looking for a way to close a form using the ControlBox and it close a group of forms with it, without closing the whole program (only a certain number of forms) [code]...
I am trying to make a textbox accept on the numbers 1-4 & the backspace key. The numbers part is working fine, but it will not delete the number once it's inputted into the box using backspace. Here's my existing code:
Private Sub txtCode_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles txtCode.KeyPress 'allows the textbox to only accept 1-4 & backspace If (e.KeyChar < "1" OrElse e.KeyChar > "4" _ AndAlso e.KeyChar = vbBack) Then e.Handled = True End
does anyone know how I can stop a user from closing the program if they click the "X" button of the Controlbox, but allow them to close the program by clicking another button? I don't want to make the "X" button invisible. I still want it to be there.
Im working with MDI parent/child objects. when closing the child objects i need the child to check to see if it is the last child object before closing. i couldn't find anything on google, maybe im searching for the wrong thing.
In VB 2010 after working on a form in design mode which has a menustrip and the form is taller than the IDE [Design] window and not returning to the top of the window before running in debug mode, the menu is eliminated from the menubar on the running form when the controlbox is set to False for the form and I could not access the menu.After returning to design mode and scrolling to the top of the form and running debug, the menu returned.Is this a bug in the IDE or what?
1)Interestingly, if I try to draw on a Form with formborderstyle = none, no drawing appears.On a form, with borders; no problem
2)If I draw from wihin a paint event, i can draw on both.However, the paint event has its own issues, most irritatingly the fact that it doesn't draw immedately, but only after going all the way back through a whole chain of calls.anyway that I can draw directly on a borderless form?
I am trying to make a borderless form so I set the "Form Border Style" property to "None". So then I ran it and could not move it around. How do I overcome this? Btw I already made the close button and etc.
I am working on making a borderless form resize, but every time you move the mouse while resizing, it starts blinking until you are done. Is there a smoother borderless resize?
Here is the code I have right now
Dim CurLocation, AppLocation As New Point(0, 0)
Private Sub Sync() CurLocation = Cursor.Position AppLocation = Me.Size
How to make A Form in vb.net Transparent without Making Its Contents Transparent..! Actually I mean I make a border less form which I want as Transparent and in that Form I added little animation picture. And I want this animation picture visible. But what is happening here is wen I am setting the Form opacity to 10% both Picture n form are getting Transparent. I only want form transparent and not the Picture.
Would you like to print a form, without borders. I've tried several things but what I can only see in the picture. Also would like to put a scroll bar on the form to work in an A4 format.
I already got the move part, that's easy, what I'm having trouble with is when I click on the form and try to move it, it shifts a little, that is really annoying, I just want it to be smooth. I want it to be as if I'm moving the form from the title bar. [Code]
