Quote:This is my first code lineThen I want to add a delay hereThis is my second code lineI want it to first process the first line, then make a delay before processing the secondline, then it will process the second line.
View 9 RepliesWhen reading from a network stream using the following [code] I tend to get the data in two or more chunks, unless I specify a delay after each buffer read (which is hardly desirable). It is usually a problem with 4k+ buffers written (in one large chunk and 'flushed') to the networkstream and read in smaller chunks (of say 1k).This is seriously problematic for the rest of the code, since the information is broken up in bits and not properly handled.Is there a way to ensure that all data available is 'captured' without using unrealisticly large buffers or using delays?
View 4 RepliesI am using thprocedure "UpdateDatabaseBySQL"to save data in to my MS Access table using VS 2010. The problem is, sometimes when I retreive the values from the database, they are blank. But my save procedure worked well. If I pause the app for 10 seconds and query,everything works. So what I did was add System.Threading.
View 22 RepliesUsing VS2010 in Win7-64 bit with VB.NET. The project build has suddenly got extremely slow after an edit. When I build a project for debugging without any source code changes, the project builds very quickly. However, if I make a minor change to the source, such as adding a space, the build delays for 15 sec. Did the obvious things - clean the solution, reboot etc. Source code is a single project with less than 10,000 lines. Reboot, start IDE, click the space bar, build and bam! - 15 sec. delay. Is there a cache or anything that needs to be flushed or deleted?
View 5 RepliesWhat is the Simplest code to make the mouse click once?
View 3 RepliesIf I have a textbox, and I have this for example:[code]Now, how do I put a check, to check if there's a free line between the text, do the text adding, if not, send a msgbox?
View 5 RepliesI have got the code to draw the line at the angle. the issue is that I need 0 degrees to be the right hand side and not the top.[code]
View 37 RepliesHow to find Lines of Code in VS 2010?
View 7 RepliesI need to read lines from file. Now my code is like this:
Sub data()
Dim reader As New IO.StreamReader("log.txt")
For i = 0 To 1500
date(i) = reader.ReadLine
Next i
End Sub
Now if some user will change add or remove the data from this file, it will end up with error or sth. I also tried to write sth like this:
Open "C:in.txt" For Input As intInFile
But there appears an error, that open is not declared and IO functionality is microsoft.visualbasic namespace. I added this name space (at the top: Imports Microsoft.VisualBasic), but this error still occurs.
I have a windows form with a textbox and a button, what I am trying to do is enter a number in the textbox and when clicked on the button to cut and paste the data in to a new text file (from number 0 to the number I entered).ie, textfile 1 has 100 lines of data, I enter 25 and press OK I would like to take the first 25 lines and save them into a new text file and save the remaining lines in textfile 1 so it should be like textfile1 75 lines and textfile2 25 lines.The closest I've come to this is the following but this only deletes the one line..[code]
View 3 RepliesI have two text files and each text file has various columns (each column is separated by a tab " "), now some of the fields in column1 text file2 match the fields in column1 text file1. What I'm trying to achieve is to remove every row in text file 1 where the field in column1 matches the field in column 1 textfile 2 - is this possible?I have used some basic coding in the past to remove certain lines, but nothing as complex as this.
Dim linesList As New List(Of String)(File.ReadAllLines("Path"))
linesList.RemoveAt(1)
File.WriteAllLines("Path", linesList.ToArray())
I have a multiline textbox where I sometimes get the first and last line of data that is blank.
This is my code that populates the textbox:
txtOutput.Lines = lines.ToArray How can I remove these blank rows?
Im trying to truncate lines in a .txt file from 19chars to 13chars. Then copy the .txt file to another location and rename the extension to .lst. As below... Iam having issue with getting it to write the truncated number to the new txt file. Its some how returning a Null referance & i cant work out why??
Imports System.IO
Public Class Form1
Sub ProcessFile(ByVal SourceFile As String, ByVal DestFile As String)
[code].....
everytime i try the space then underscore + enter it doesnt work and it lights up red edit - like for example this is a comment:'you must add such and such to this variable and then you must declare it' say i have that for a comment and i want to break the comment after variable. when i do this 'you must add such and such to this variable
View 2 RepliesI use the following coding to replace a word in my textfile, would it be possible to add any coding that will remove all blank lines from the same text file?
Dim EditMyFile As String = IO.Path.Combine("D:Test.txt")
Dim inputFile = Regex.Replace(IO.File.ReadAllText(EditMyFile), "test", "test2")
IO.File.WriteAllText(EditMyFile, inputFile)
I have tried the following but it doesnt work.
Dim EditMyFile As String = IO.Path.Combine("D:Test.txt")
Dim inputFile = Regex.Replace(IO.File.ReadAllText(EditMyFile), "test", "test2")
IO.File.WriteAllText(EditMyFile, inputFile)
Dim sText As String = File.ReadAllText("D:Test.txt")
Dim sNewLines() As String = sText.Split(New Char() {ControlChars.Lf}, StringSplitOptions.RemoveEmptyEntries)
File.WriteAllLines("D:Test.txt", sNewLines)
I want to put a function that reads a text file and put it in textbox1. I used this code to read the last line
Textbox1.text = Io.file.readalllines("C:c.txt").last
but I want it to read the third line.
I want to create a little program with textboxes in it, that writes the contents of these textboxes to a file. It also needs to write some predefined lines to the files, even on the same line as where the contents of the textbox is.
Heres an example:
The file should look like this when you open it in notepad:
^1::
Send t Text from TextBox {Enter}
First I think I would need to do this:
Dim ioFile As New StreamWriter("scripting.ahk")
ioFile.WriteLine("^1::")
If I do the above it works.. But how can I write another line where the "Send t" and "{Enter}" gets written automaticly before and after the contents from the Textbox?
I have a text file with user names in them on separate lines. I want to check to see if any of the lines doesn't match the exact text im checking for. It doesn't matter what line the text is on, as long as it is in there. If it's not, alert me. Previously i tried .contains() but obviously if a user name is "hello" and another's is "helloworld" it will match both of them.So basically i need to read all the lines in the txt file and if none of them lines contains the specific text im looking for then alert me. [code]
View 5 RepliesI am having a bit of trouble on how to do a simple compare of two textboxes.In first textbox i have lines with values (mostly http links) In the second textbox i have lines also with links I want to compare every line in textbox1 with every line in textbox2.i would prefer TextBox1 to stay textbox but textbox2 can be a listbox or anything else.
VB For Each line In Me.TextBox1.Lines If line.Equals("i need to have every item from textbox2 here", StringComparison.CurrentCultureIgnoreCase) Then End If Next
I have the following code to read a csv file and copy each line to another file as long as it does not contain certain strings, it seems to work a little but it leaves some lines in it shouldn't, and it's also taking lines out it shouldn't as if I keep running it again on each output file it eventually takes everything out!
Private Sub Strip_File()
Microsoft.VisualBasic.FileOpen(1, tFile.Text, OpenMode.Input, OpenAccess.Read)
Microsoft.VisualBasic.FileOpen(2, "C:AcmeIPPMaster.csv", OpenMode.Append, OpenAccess.ReadWrite)
[Code]....
Some of my users are collecting data files this size and wish to load it in to my tool. Is there a way to load large files of string data w/o getting a OutOfMemoryException? I have tried many different storage methods (Array, List, etc) but always without success.Before anyone asks 'why load it all at once', let me say the nature of my app is speed critical and it must be so.
View 3 Repliesas per title, I want specific lines in listbox as bold or with colours.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim xyz() As Byte = {&H1B, &H0, &H10, &H1B, &H0}
ListBox1.Items.Add("XYZ: " & read_write_str(deviceHandle, xyz, xyz.Length))I get reply from device for i.e. 1234567890, I want this to be in BOLD or if I could add colours to it.
How do i can put more lines for specific information of regex?
...Regex("(?<=SOMETHING).+?(?=SOMETHING)")
Once again selected from RuneScape, because here is best code for it.
<tr class="row rowp4">
<td align="center">
<img class="miniimg" src="http://www.runescape.com/img/hiscores/skill_icon_strength1.gif">
</td>
[code]....
Here's what i've got so far, i've written all of the data that i'm going to put into my config file, however i'm having trouble reading the specific string values that I need from that ini file. The parts of the ini lines I want to get are the values in between the I've tried using streamreader a couple things but i'm having trouble figuring that out. I need to parse each line of the ini file to get that value in between the single quotations, so that I can set the value for my richtextbox background and text color as well as a few other things that i've set up in my notepad including tab spacing and so on. lots of these different values need to be converted from a string value to integers, and boolean values as well. (4 of them, the rest of them don't have to be changed because they are already string values when my application reads them to determine it's application load settings.
EDIT: I just noticed in the preview that this is from the version of the app where I had streamwriter write "______ value=" & Something to a file. lol some of the (')s are still in this version, so please excuse that little part. I had them in, but took them out so that I could trim data to get a value easier, but I want to use (')s hopefully when all is said and done.For example, just to restate what I want - in the ini file it will read [setting name] value='VALUE'I want to be able to "get" the string value of "VALUE" within the ini file between the 2 single quotations '
how to count the lines in textbox1.text (with multiplelines). I don't need to count each character. I only need to count each line from top to bottom in textbox1.text (multiplelines) and I will use Label1 to display the numbers.
example:
1-pauljaones
2-tommyperrry
3-marktoms
4-Jonessmith
5-paulwhite
Obviously this is 5 lines and that's what I need to count.
I have written a simple script to get a bunch of lines from a text file (they will be filenames eventually) which are split by new lines and puts each one into an array..
Dim ary() As String
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If My.Computer.FileSystem.FileExists("C:MenuFiles.txt") Then
[code]....
The only thing I can do for now is either use the substring function to remove the first character from all array values after 0 but I don't like that because it's messy and what if the split "works" as I want it to one one of the lines and knocks of the first character when I don't want it to.
I'm working on a new version of something I had created years ago in VB6. What I was doing then is populating a combobox with lines from a sequential file ("title","URL") like this:
Open "data.dat" For Input As #1
Do While Not (EOF(1))
Input #1, NameInput, URLInput
cmbEntry.AddItem NameInput
Loop
And then checking against it on a button click to load the URL associated with the selected name:
Open "data.dat" For Input As #2
Do While (cmbEntry.Text <> NameInput) And (Not (EOF(2)))
Input #2, NameInput, URLInput
Loop
[Code] .....
What I'm trying to do in Visual Basic 2010 is the same process, though I'll be including a third field ("category","title","URL") to determine which one of four different comboboxes I add the entry to. I know I need to use streamreader, but I'm not finding much in the way of documentation or examples on how to do what I'm trying to do, which is:
- Populate one of four comboboxes with the second value in each line of an external text file, based on the first value in that line
- Set a string to the third value in a line of an external text file, based on the second value of that line
How to read these values from the file.
I'm new here and I'm trying to make a little program with Visual Basic (2010 Express Edition).The purpose of this program is:
1) Load the text file lines and split them into a constant and a value
2) Edit the text file lines values
The content of the text file is like this:
[Code]...
This basically split every lines in two parts: the constant ("Name", "Surname", "Age", "Hair") and the values ("Mario", "Rossi", "50", "Black").Now about the second point, I've added a Button1 which should take the Textbox1/2.Text and the Combobox1 selected item and replace the values(aka separator(1)) in the text file. The problem is I don't have any idea at the moment how to do it. What method should I use?
I have started to work some more on my 'shape editor'. If you're not familiar with it,ust imagine the Visual Studio form designer: a 'canvas' (the form) with a bunch of 'shapes' (the controls) that can be selected, moved, resized, etc. I have just finished implementing snapping between shapes and the canvas boundaries. But now I am having some slight issues with painting the snap lines.Just FYI: this is what I mean by snap lines:The blue lines that indicate that the 'buttons' are snapped to each other, and a purple line indicating that button1 is snapped to the boundary.
My shape editor is based loosely on jmcilhinney's 'manipulating GDI+ drawings' codebank entry, and a central idea in that post is to only draw what is necessary. In other words, when I move a shape I could re-draw the entire canvas, but it is much faster and smoother to only re-draw the old and the new location of the shape. Since nothing else has changed, I don't need to draw the rest. So, I simply invalidate the old bounds and the new bounds, and even with a lot of shapes all moving simultaneously it still feels very smooth.
This is an example of the text I want to modify:
0110
0001
0001
1000
[Code]....
Here, I want to replace two-line digits in bold(0110 0001) with a different sequence as the program scans the text line by line. But two things complicate the task:
1. the comma lines should be ignored, but
2. they also should stay intact after changing the digits.