VS 2010 - How To Check Whether Project Controls Imported Or Not
Dec 8, 2011
I have a project solution which consists of few projects including a project which for window controls. In project A, I can import the project control but for another project B, I can't import the project control and cannot access the contains for the project control. May I know why and how to check whether the project control can be imported or not? If the project control is not importable to other project, then why my project A can import that and project B is not able to import that?
View 1 Replies
ADVERTISEMENT
May 9, 2011
can a vb6 project be imported into vs2010? I have a vb6 project that I have been working on and would prefer not to start all over again.
View 6 Replies
Jan 23, 2011
I Imported 2 programs that I made into one solution. I made a "BIG" main menu (new windows form), put two buttons. I code one button to open up the first project (that works fine). I code the other button to open the project I imported, however it says that the name is not declared. Am I doing something wrong?
here is my code for the "BIG" main menu:
[Code]...
now only the "Original name of first project" appears to be not declared, if I delete "Original name of first project", then "the project I imported"is not declared and so forth. Note: These are not the exact names I called my forms. I'm just trying to explain it clearer.
View 2 Replies
Jan 21, 2011
i Imported 2 programs that I made into one solution. I made a "BIG" main menu (new windows form), put two buttons. I code one button to open up the first project (that works fine). I code the other button to open the project I imported, however it says that the name is not declared. Am I doing something wrong? here is my code for the "BIG" main menu:
[Code]...
now only the "Original name of first project" appears to be not declared, if I delete "Original name of first project", then "the project I imported"is not declared and so forth. Note: These are not the exact names I called my forms. I'm just trying to explain it clearer.
View 2 Replies
Mar 7, 2011
i am trying to add a text file in Debug folder. But when i go to project tab to add a new item, there is no option to add a new item? What part of the setting needs to be changed? Using Visual basicExpress 2010.
View 1 Replies
Feb 15, 2010
In one of my forms witch I imported from VB2008 there are all properties saved in the *.resx file. One Property, of the Type System.Windows.Forms.Keys, can contain the Value 'Ctrl+F1' witch compiles fine in VB2008, but not in VB2010. To reproduce, simply add the following to any resx file:
<data name="cmdFenster.ShortcutKeys" type="System.Windows.Forms.Keys, System.Windows.Forms">
<value>Ctrl+F1</value>
</data>
It will compile fine with VB2008, but not with VB2010. Notice: The VB2010 also generates this Code in the resx file
View 2 Replies
Oct 11, 2010
I am working with VS2005 using VB.net I have two project (Project A, Project B), project A is the startup project with form1, while project B is dependent on project A, both under the same solution. I have established the project dependencies so that Project B is now Dependent on Project A. Also i added references to both projects to each other so that i can access controls on Project B forms through Project A (Like changing the value of a textbox on B through A). My problem is that whie trying to access controls on Project B Forms it doesnot show up.
[Code]...
View 10 Replies
Jun 12, 2012
I was able to include (add) an existing project to a current one. I finally got all the references and libraries in place, and everything works great. I decided to move forward with development and started adding some features...much to my surprise, when I debug none of the controls are there (In the form belonging to the added project)...
Do I need to develop the second project from it's original solution (and not from within the combined solution)?
View 5 Replies
Nov 22, 2010
I am trying to update a Vs2008 project to vs2010. In one of my projects I have two controls. The controls are not being seen by the form when I open it up in design view. They are friend controls. (No code has changed since I opened it up in vs2010.) But it was running fine in vs2008.
View 4 Replies
Mar 15, 2011
I've searched the whole web (at last where google can see) for a solution, but i just can't find. The problem is the following: I want a list of all controlls in my project, not only on open forms. The reason is that i want to make an access control, and the admin will set which buttons each users can use.
[Code]...
View 9 Replies
Dec 8, 2011
How do I check whether the controls in a usercontrol contain any value?
I have created a usercontrol called ctlCustomerAddress and I want to create an address record in the database if only I have the values in the textboxes.
View 3 Replies
Sep 5, 2008
I want to create a table with 2 fields (FormName, ControlName) that consists of all form names and all control names (within that form).[code]...
How do I loop through all forms and controls in my project?
View 11 Replies
Dec 6, 2009
I have a project, that has alot of controls (mostly buttons, arranges in group boxes, withing )Is there an easy way to drag and drop them to another project and maintain control names, so that I can copy all event code etc.?Another question - how can I move controls within tab control's pages? As I recall, cut - paste loses it's event code.
View 5 Replies
Feb 28, 2012
Ive got a Form application in VB.NET.I have many text boxes on one form (about 20). Is there anyway to check them all at once to see if they are empty instead of writing out a massive line of code to check each one individually such as
If txt1.text = "" Or txt2.text="" Then
msgbox("Please fill in all boxes")
View 4 Replies
Aug 10, 2009
I use the following in VBA to check if Segoe UI is available (it's such a lovely font...)
Public Function FontExists(FontName As String) As Boolean
Dim oFont As New StdFont
Dim bAns As Boolean
[code].....
View 5 Replies
Sep 29, 2010
This sounds simple and I'm sure it is. I have a form with textboxes and combo boxes within a tabview that has 8 tabs. All the data is loaded from a database. The user has the ability to update these controls and then update the record in the database. Is there a way that I can check an entire tab view or group of controls for value change other than using an if statement to cycle through each control? Something to the effect of If TabControl changed, then execute...
View 2 Replies
May 28, 2010
Has anyone else had issues with Visual Basic 2010?My visual basic program has been running fine for months but recently every time I try and load a project (any project) the program freezes, then I have to close it down and reload, every time I load Visual basic for the second time I get the following error:
HTML
An error was encountered while opening associated documents the last time this solution was loaded. Document load is being skipped during this solution load in order to avoid that error.Plus when trying to run a project in debug it takes ages to load (around 5 minutes) this has only started happening recently, projects were loading in seconds.
View 9 Replies
Feb 26, 2009
I'm developing a solution that I'm going to split into two different directions.I've built custom controls for the first application, and now I'm creating a new solution where I'm importing all the Forms and Modules to the new solution I'm developing by using "Add Existing Item" from the Solution ExplorerWhen doing this, most of the errors I'm receiving I'm able to correct by "Find & Replace" with the new name of the new solution. (They seem to be references to the old name of the solution, that I simply replace with the new name. Example. Global.Xname..... I now replace with Global.Yname.
View 6 Replies
Feb 25, 2011
I'm fairly new to VB.NET and I'm currently playing around with user controls, figuring out good programming practices. As far as I understand, to create and use a UserControl, I need to create a project with the UserControl in it, then build the project and use that DLL (add it to Toolbox or otherwise).My question is this: Is there a way a have a project (a Form with a bunch of things on it) that contains a UserControl written in a *.vb file inside that same Project? If you do that, the DLL (in my case) never gets produced, possibly because the UserControl is never used and building it is simply omitted. Is it perhaps a bad practice to do that altogether? It simply makes sense to me to keep a UserControl as a part of the Project that uniquely uses it. Is there a reason not to do that?
View 1 Replies
Sep 4, 2009
Are there any third-party scripting editors that are available as controls (DLLs) for custom projects? I am interested in knowing what is out there and what scripts are provided?
View 1 Replies
Dec 17, 2009
I am a student of class 12. I wish to make a vb project on the topic "airline reservation ssystem". I wanted to know how can I get some new controls and styles/skins to make my project look attractive.
View 1 Replies
Jul 16, 2010
I'm trying to migrate a WPF Application based on C# to identical project but based writed in VB.NET.I have some problem with XAML Window.if I build solution with this xaml, it's works correctly. But, if I write:<menus:MenuFullMaintenance Name="Test01" />I have this error message:"Error 8 Type 'My.Frame.UI.WPF.MenuFullMaintenance' is not defined. (Window1.g.vb)"The "Name" property raise this exception...why? How can fix it?
View 1 Replies
Dec 21, 2011
I want to check at runtime if an assembly was probably written in VB. It doesn't have to be a bullet-proof method. Maybe call GetReferencedAssemblies() and check for an assembly that all VB projects reference?
View 3 Replies
Sep 30, 2011
A colleague has written a useful tool. He wrote it as a standalone tool, but it works even better as an includable dll, though it needs a bit of other functionality for it to be a really good drop-in component. What I am wondering is whether a project can be compiled as both an exe and as a dll?
There are alternatives, such as having a dll version and an exe version, since the dll version needs to include a few different methods that the exe version doesn't need, but this alternative sucks, since it would mean changing two sets of code.
Another alternative is to build the dll, then change the exe to be a project that references the dll....and does nothing other than calling one method in the dll. That kind of sucks, too, but not as bad.
I want to be able to use his module in some of my programs, and it really should be built as a component rather than a standalone app, but I want to know whether there are other options that I haven't considered.
View 2 Replies
Aug 23, 2010
I have a project with lots of forms in there with the default font property of Microsoft Sans Serif, 8.25pt
How do I change the font for all forms to let's say Tahoma, 8.25pt without changing it manually per form?
View 2 Replies
Dec 7, 2011
So, concering my project: I am trying to control an RC Car via Kinect, until now I got it working with key control only (eg WASD). So, I am using a Velleman K8055 Interface Board + the Kinect and VB Windows Forms. So far, so good, I created 4 Forms: menu, info, kinect-controls + wasdcontrols window. The error only occurs for my kinect-controls window (german name: Steuerung.vb) & that's my source
[Code]...
View 5 Replies
Dec 8, 2010
How is conditional compilation controlled for a VisualBasic web? For a VB Windows app, I put a conditional variable in Project > Compiler tab > Advanced > Custom controls.
How in a VB web app is a conditional compilation variable assigned that can be accessed by all the files of the web app?
View 1 Replies
Mar 24, 2011
I have made a form that consists of textboxes nested in groupboxes nested in tabpages. I want to check if all textboxes are empty in every groupbox and even if the controls from a groupbox in a groupbox are empty.When they are empty i should not create an element string for my .xml document.Below is the code that I have at the moment. I call it with the form as the parameter.
Public Sub recurringControls(ByRef ctl As Control)
For Each c As Control In ctl.Controls
If c.Controls.Count > 0 Then
If c.Tag IsNot Nothing Then
[Code]...
View 1 Replies
Nov 5, 2009
how do I check if a project is up-to-date?
I'm basically trying to programmatically build each project in a list but only if they have changed. So does anyone know of a way (using EnvDTE maybe) to check if a project changed and therefore needs to compile?
View 1 Replies
Feb 25, 2011
I have a little prob guys. How can we set vb.net setup project will check for an update of its newer version first before proceeding in installation.
View 5 Replies
