VS 2010 - Load A Webbrowser Window Somewhere In The Form
Feb 25, 2012
What I was thinking of is load a webbrowser window somewhere in the form, but within the webbrowser size, by default, load only say the Half left (or right) part of the webbrowser window. In pseudocode it would be smth like webbrowser1.show(1*webbrowserWindow.Height, 0.5*webbrowserWindow.Width, webbrowserWindow.With.StartFromLeft/Right). Now I know it sounds pretty crazy, but it would be smth very handful for me. Look at the SS below if you didn't get what I'm trying to say because that's quite possibly as clear as I can be.
View 2 Replies
ADVERTISEMENT
Feb 10, 2011
I have a very large program I would like to write but think starting with a smaller test program would be a good idea. What I want to know is: I have a base Form from which a user clicks a button to answer a question (Answer A, B, C, or D) which if the answer is correct will pop up a "Correct! answer response in a separate window. This is ok for now, however, when the "proceed to next question" button is clicked, I would like the next question to appear in the original base form window.
Right now it pops up in a separate window and I'd rather not have 20 windows open at the end of the quiz. How do I load the next form in the same window!? Obviously it's possible and could be something I'm completely overlooking, and I've also read that I could replace all data with the next Form. I have searched "Visual Basic load form in same window" and came up with results, but none of what I'm looking for.
View 2 Replies
Oct 18, 2009
How can i load window explorer to my form .
View 1 Replies
Jan 27, 2011
WebBrowser Handle new window: How I can open it in a new window
View 7 Replies
Jun 14, 2009
I got a webbrowser control on 1st form (Form1.vb) and a New Window button...When i press new window button, SAME window must open (i mean with same content)heres what i tryed:
rivate Sub newWind_click (ByVal..............Form2.show
I just copied form1. (Form2 = Form1 copy)
View 2 Replies
Mar 10, 2006
I am using an embedded webbrowser control to access a third-party website, populate the username and password boxes on their front page, and login. The problem I have is that the resulting window that the site returns to me is in the form of a new window. What I want to do is capture this window and all it's session/cookie data in to the original webbrowser control, as even if I direct the original window to the same resulting url, some kind of authentication data is missing and the site tells me I have logged out, even though the popup window works fine. I need that page in the original control so that I can continue to access it programmatically, and I don't really want to get in to the complication of accessing the new window, as I expect I'll have to delve in to the api or something.
View 1 Replies
Sep 22, 2009
I used to use windwos.form.webbrowser along with cast of its activeXinstance to shdocvw's webbrwoser to get the newwindows event to force new windows in another tab instead of popup. also capture right click new window requests to another instance of browser in another tab but keeping the security context
[Code]...
View 3 Replies
Jan 23, 2011
I want to load a child form which is a login form by default when the parent form is loaded.Right now when I click new file on the toolbar of the parent form, then only the login form is loaded but i want it be loaded by default without clicking anything.
View 10 Replies
Feb 26, 2012
I am after some code to load another form when the user closes the current form. I have tried this
[Code]...
View 14 Replies
Nov 7, 2010
When using the WebBrowser control, is it possible to cause popup windows to appear within the WebBrowser control itself instead of a new window?
how to get the popup to appear in the same browser window.
View 1 Replies
Aug 1, 2011
I have a code which when used, firstly application will run the Splash Screen application. Splash Screen will be active for several second, and then the main of application will show in full screen. Before the user use the application, user must Log in first. This works but the problem is that it loads the splash and login form twice. To worsen the situation, the second login form that appears gives access to the system even when the cancel button is clicked while the first login form just works fine. My codes for the three forms are as listed below:
[Code]...
View 6 Replies
Mar 11, 2010
Private Sub LinkClicked(ByVal sender As Object, ByVal e As EventArgs)
Dim link As HtmlElement = WebBrowser1.Document.ActiveElement
Dim url As String = link.GetAttribute("href")
[code]...
Okay so here's the question how do I get the links that open in a new window to open in my main webbrowser control. The above code does some, but it's not fool proof.
View 1 Replies
Jun 18, 2010
I Want A Web-Browser (WebBrowser1.Navigate [url]) to navigate to a direct site witha .txt file so the text appears in the browser. ok that works.
When Form1 Loads I want To Use This But It Wont Work WebBrowser1.Navigate[url] but it will only work if form1 contains WebBrowser1.Navigate[url] and button1 = TextBox1.Text = WebBrowser1.Document.Body.InnerText.
Final Question How Can I Get Form1.Load To Do Both Operations
View 4 Replies
Jan 14, 2012
make a window with a window. hit coded button/ and or image coded for a button. make visible. you can drag it around and make it work like you were using a window.
Update: the form 1 would have a image button that opens a form thats form would act like a window. like the ones you use when you open up a folder on your desktop. but it would minmize into the form 1 as an image button caching its info so you can pop it back up.
View 3 Replies
Apr 17, 2011
I have a form in design view and when the form loads, I want the TimeMaskedTextBox to show the time now. But allow the user to change the time for later time in the day.
Let's say the time now is: 09:00 and the user wishes to change time to: 22:00 and when the form is saved, And a new form is loaded then the TimeMaskedTextBox will go back to the time now. How would the code be written.
View 5 Replies
Apr 30, 2011
so I have the following
Try
Dim username as String = My.Application.CommandLineArgs(0)
Dim password as String = My.Application.CommandLineArgs(1)
Catch
Msgbox("Cannot launch")
Application.Exit
Exit Sub
End Try
I placed this in the form's load event. What I want is for this check to run before the form even loads.If an error occurs, the msgbox comes up and the form is never seen. When I try the code now, the form comes up the msgbox shows. When the user clicks OK the form closes. I tried placing it in the form's designer but the designer tries loading the form any way. How do I get this check to run before the form shows?
View 2 Replies
May 2, 2010
I am making the Transition to VB.Net (using VB.NET 2010 express) and I have a simple problem that is driving me crazy. I wish for my Form when it Loads, initialise and then call a sub and do some stuff eg perform a plot. If i place a button on the form and click it the sub works fine.This task was simple to do in VB6 but for the life of me I cannot get it to work in VB.NET. Has the Form-Load event changed in some way with .Net?
View 4 Replies
Mar 6, 2012
I have a calculation project with 6 forms. The last form shows all the input and output data from the previous forms. This is accomplished in form6 load event. Form6 contains about 40 controls (mostly textboxes, labels and few pictureboxes), populated in this way:Textbox1.Text = Form2.Textbox3.Text, etc.I am not sure if this is a good practice. I know I can use the DGV, but it does not suit me because of the graphical reasons.
View 1 Replies
Jun 12, 2012
I have an app where there's an edit form and it loads a bunch of stuff into comboboxes which takes half a minute to load the first time. Once it's loaded I keep the instance of the form and just hide it instead of disposing it until the app exits. What I would like to do is in the Sub Main of the app (there is no startup form) I would like to launch a new thread and load that form into memory, but I don't want the form to be displayed at that time, what's the best way to do this?
View 10 Replies
Feb 23, 2011
I have set up a form that will act as my parent (this hasnt been set up as an MDI).On this form I have a Panel that I will be loading forms into. I have a form that contains a DGV. On the load of the parent form, I then load this "child" form into the Panel. In the onLoad event of the "child" I go off to the database and populate my DGV. Then I run through the rows in the DGV and add in a logo image in the first column and change some cell colors based on values in those cells.
This all works great, however, when the child form finishes loading all the changes are lost. eg The logo images go back to the red cross and the cell coloring is gone.If I call Me.Refresh() in the child window as the last line in its Form_load event I can see the logo and cell colors update to what I want, but as soon as it has updated, its like it immediately refreshes again and all the changes are gone.
View 1 Replies
Dec 29, 2011
I wanted to select the row the user was last working on in the datagridview. So I created a setting to contain the row index. But then I had trouble using the form load event to select that row in my datagridview. It would always select the first row. I then moved the code into the DataBindingComplete event and it worked like a charm Example:
Private Sub dgvTaskList_DataBindingComplete(sender As Object, e As System.Windows.Forms.DataGridViewBindingCompleteEventArgs) Handles dgvTaskList.DataBindingComplete
[code]....
PS, if you want to select the full row, make sure the DataGridView Selection Mode property is set to FullRowSelect.
View 2 Replies
Apr 30, 2012
I am trying to submit a feed back form, but I am struggling to actually fill it!!!
Here's the
<form target="ajaxframe" method="post" action="misc_js.php">
<div class="class_postfeedback">
<textarea id="feedback_body" class="feedback_area" cols="25" name="feedback_body" style="overflow: hidden; height: 70px; color: rgb(136, 136, 136);">Write Something...
View 9 Replies
Aug 4, 2011
I am trying to create a simple parent-child form in VB2010. I use a datagridview for each table/datasource and each is bound to the paretn/child table and each table grid fills correctly. What I want is the parent-child relation to enforce filling the child table with only rows that fulfill the current row on the parent. I have created a DataRelation in the form load, but it will not permit a relation between tables in 2 different datasets. If I attempt to place both tables in a single dataset and define the PK-FK relation in the SQL Serve,r I cannot create 2 separate datagrids from the same dataset.
View 12 Replies
Mar 27, 2011
i want to use window form application to write this game?
View 3 Replies
Jul 27, 2009
Imports System.Data
Imports System.Data.OleDb
Public Class Form1
Dim con As OleDbConnection
Dim cmd As OleDbCommand
[CODE]...............
The insertion part of the form works great. But my problem is in the form load part......If i leave a field blank(Null),then perform Save operation,close the form after successful insertion and then reopen the form,then it retains the previous values during the form load......This is only in case where i leave a field blank in the previous data entry in the database.......But if i enter values in all fields then form load is working great.
View 2 Replies
Feb 8, 2012
i just got visual studio pro 2 days ago and every time i create a project, close VS 2010 and when i come back to work on my project and i click on my Form.vb i got every time : Visual Studio has stopped working.Then i tried run as administrator it doesn't work. What i don't understand it's when i click on show code the form load but the moment i click on it ,it just crashing and it's make me wanna drop laptop cascade...I've look on forum and post here but i haven't saw what i was searching.Here the error that VS show me :(Those files doesn't exist i search)
Files that help describe the problem:
C:UsersUsagerAppDataLocalTempWER152.tmp.WERInternalMetadata.xml
C:UsersUsagerAppDataLocalTempWER18C9.tmp.appcompat.txt
C:UsersUsagerAppDataLocalTempWER3520.tmp.hdmp
[code]....
View 2 Replies
Feb 25, 2012
I created a windows form which contains a datagridview. I named one of the columns in the grid 'location' which appears to have generated an error. The problem is I cannot load the form to remove the column as an error is generated and when I load the designer code it says do not modify with the code editor but use the windows form designer.
[Code]...
View 1 Replies
Oct 16, 2011
This is the strangest thing, I can not figure out why this is happening. When I delete a radio button from my form which is used to filter data in a database Form_Load stops working.My project consists of a database and a web browser. The database has a search filter options.[code]For some reason it didnt load my settings on start up. I made a button which displayed True/False in a text box to check if it was saved in my settings, it was, it just didnt want to load. So I deleted it and everything broke! Nothing in the code is referenced to the RadioButton or its code.
Have I done something wrong or is VB just messing with me? There is obviously a bunch of more code, I just posted what I think is relevant to the issue. If you feel something is missing, tell me and Ill post it. ied to change the RadioButton with a CheckBox, and I changed the code from "Me.ExampleTableAdapter.FilterHide..." to "Me.Example TableAdapter. Fill...", which is the same as in Form_Load. It works if it starts checked. If I remove this code or delete the CheckBox nothing works even though the same code is in Form_Load. If I start off with the CheckBox in an Unchecked state nothing loads, if I check it everything except the Browser works for some reason.
View 5 Replies
Dec 2, 2011
I've created a form with several controls to specify the inputs to my program. They include TextBox, OpenFileDialog, Button and even a user control for numeric input. When the user clicks the 'GO' button, the program begins it work. Opening several files and processing a bunch of numerical data. This could take many minutes/hours with large datasets.
What I've been trying to do is have another window/form open up and send status information to it for the user to view. The info to be displayed is varied and constantly updated as the program crunches the numbers. Many many programs do just this type of activity.
I attempted to create a second form with a huge TextBox thinking I'd just write stuff to it. I called the .show method within the .click of the 'GO' button and of course the form is displayed but control of the program's execution doesn't return until the form is closed. How to I maintain execution and have a second window/form to display status?
View 3 Replies
Dec 14, 2009
How can I load a form and allow it to run it's code in the form load but keep it not visible. I want it to do what it needs to but but not display.
View 3 Replies
