i've just completed my UserControl and i'm wondering is their a way i can make it so that when i include in my distribution package that the user cannot just open up Visual Basic and start using my control.Is there away to make it say something along the lines of "You are not authorized to use this control!"
View 1 RepliesI just discovered the joys of UserControl's and I was wondering if it is possible to populate the usercontrol with data from a database in the UserControl's Form.Load event instead of the form the userControl is placed on. I feel it would make using the control a lot easier if it just populated itself without anymore code.I tried it with a ListView but it gave me a bunch of errors, so I didn't know if it had to be done a certain way or if it was just one of those things that doesn't work no matter what.
View 8 RepliesI have MainLayout.master that has UC_Menu.ascx on it. I have a page named Customer.aspx that uses MainLayout.master. Customer.aspx also contains a UserControl named UC_Details.ascx.How can I have UC_Menu.ascx call a function that is in UC_Details.ascx with this scenario?
View 3 RepliesI just downloaded VB.NET Express 2010 and I am trying to make a user control.I start out by makeing a new project then to add a usercontrol I goto Project->Add New Item Then I Add a usercontrol.But I cannot see my usercontrol on the toolbar like you used to in VB6, I even tryed draging the control to the toolbox but it still it will not shows. Can someone help me cos I am sort of new to this .NET stuff.
View 2 Repliesi'm having trouble adding an Icon for the Toolbox on my UserControl.I'm using the following:
<ToolBoxBitmap"CovButton.bmp")> _
I have CovButton.bmp added to the project and have it's build set to 'Embedded Resource'.However i can't compile it because i'm getting an error with the line continuation character saying the following "Attribute specifier is not a complete statement. Use a line continuation to apply the attribute to the following statement.".If i remove the space between the > and _ it gives me the error "Line continuation character '_' must be preceded by at least one white space and must be the last character on the line."
how do you control USERCONTROL button1_click event from form's button2_click event?
button 1 = hidden button on usercontrol1
button2 = visible button on form1
form1.button2 should click usercontrol.button1
I'm trying to create a grid usercontrol.This means that when i press "UP" it goes to the cell above (...so on for all directions) tab goes to the right and enter goes down.Now all these keys (excluding enter) change control focus so i've got a problem using them.How can i lock focus on the control so that these keys won't change it and so that i can use these keys for other things?
View 5 Repliesi'm an old VB6 programmer that has just starting dabbling in VB.NET 2010 and my first project is a Usercontrol Button project and i'm running into some trouble with refreshing the usercontrol on events.
For example when you mousedown on the usercontrol i want it to act as if the button is being pressed in, to do this i make the caption move 2 pixels down and to the left. And then reverse this when the usercontrol mouseup is triggered.I think my code is correct but i'm not 100% sure what i'm doing with me.refresh and the usercontrol_paint events.
[Code]...
A form's key events will fire when you press a key. Place a control on that form and it won't happen any more because that control has focus. There are exceptions to this however as you will see if you place just a h or v scrollbar on the form. The key event will fire because the scrollbars can't receive focus as is demonstrated by the following
Private Sub ScrollBar1_GotFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles VScrollBar1.GotFocus
Debug.Print("Scroll GF")
End Sub
[code]....
So I've made my own special scrollbar usercontrol and i can't figure out how to have it leave the key events alone. I'm pretty sure that the problem is that my usercontrol can receive focus at the moment.
I found that the way of doing this is "SetStyle(Windows.Forms.ControlStyles.Selectable, False)". I put that in the new event of my usercontrol and now it looks like this:
Public Sub New()
' This call is required by the designer.
InitializeComponent()
I have a Windows Form frmMain() holding seven more-or-less unrelated UserControls, ucFlopsy", "ucMopsy", "ucCottontail", etc...I say "more-or-less" because each of the seven UC has three similar public read/write properties:
IsLocked (a boolean indicating if the following two properties are "Locked")
IsLockedID (if IsLocked=True then IsLockedID is an integer)
IsLockedName (if IsLocked=True then IsLockedName is a string)
[code].....
After adding a UserControl to a form which access my database I get this warning:
Warning1The database file cannot be found. Check the path to the database.
[ Data Source = C:Program Files (x86)Microsoft Visual Studio 10.0Common7IDEDatabase.sdf ]
C:UsersUserDocumentsVisual Studio 2010ProjectsProject1Project1Options.Designer.vb2160
Thing is I never had a database at that location, my database is and has always been in MyDocuments in the Project folder itself. There is nothing anywhere in my code referring to that database! When I double click it I get sent to this line in the Designers window:
Me.Controls.Add(Me.BoxControl1)
Even though I get this error I can still access my database, so basically it does absolutely nothing except drive me mad! So how do I fix this?
I have a Windows Form that contains a custom control container as a UserControl. For the sake of this question, this custom control container is called Dashboard. This container called Dashboard contains numerous other controls depending on their permissions. I need to raise events that are contained on these controls through the Dashboard control and over to the Windows Form.
How can I bubble up the event? I'm using VB.NET for this project, but can convert C# into VB.NET.Also, to complicate matters, the main Windows Form is a VB6 project. So, I'm using the InteropFormsToolkit to accomplish this.
I have two UserControls on a MasterPage. DataEntryUC contains several TextBoxes and DropDownList. NavSaveUC contains navigation buttons. When the user clicks on a navigation button, I will be saving the data entered into DataEntryUC from the NavSaveUC UserControl.
I have a couple of tables in my DB that contain stored procedure names, control names, control types, SqlDbTypes, etc.... that correlate with DataEntryUC.
How do I reference a text box that is on DataEntryUC from NavSaveUC?
I have been working on the following code from NavSaveUC with no luck.
Dim MyControlName = "txtFirstName"
Dim MyControlType = "TextBox"
Dim MyStringValue as String
[Code]....
I have a usercontrol that has a main form and calls another form within the usercontrol to get some data from a database that allows the user to select some items from a CheckedListBox control on the sub form. I want to pass the selected items from the CheckedListBox back to the main form and display the results there. I have a public property called DBList of type List(of String) on the main user control. If I create a reference to the usercontrol form the second form within the usercontrol I get a new instance of a user control. All I want to do is set the property on the usercontrol and close the secondary form. How do I reference the usercontrol from the form within the usercontrol?
Code in UserControl:
Public Property DBItems() As List(Of String)
Get
Return DBItems
[Code]....
When i use my UserControl in a project my Mouse Enter & Leave events aren't firing, i assume i fix this with a raiseevents in my usercontrol. However when i try to do this it says something about "cannot raise base event from derived class".
View 7 RepliesHey guys i've finished designing my UserControl (Button) for my project. However i seem to have an issue when i try to add it to a form, I get an error saying CovButton.CovButton is not defined.
Also if you have the time could you have a look over the source and just give your opinion on it? I think my drawing methods are pretty b-grade as it seems to freeze up a bit when you add an image to the usercontrol.
I have a main form that has a dynamically generated treeview and also a panel control. Depending on the selection made within the treeview the panel docks 1 of three diffrent usercontrols which are full sub forms(done for ease of modifing design of sub form rather than layering panels on top of panels).Upon button click withing usercontrol i wish to trigger event within main form.For example delete button wich then triggers to remove current selected node from treeview. code for 1 of three diffrent user controls
Dim ctrlQ As New QuoteUC(TrViewQuotation.SelectedNode)
PnlSubFormDock1.Controls.Add(ctrlQ)
Code for delete button for which i need to raise event.
If MsgBox("Are you sure you wish to delete this customer ?", vbYesNo, "Delete Record") = vbYes Then
Deletecustomer(n)
End If
I have created a usercontrol named note. in the note usercontrol in contains 6 labels. now i want to access the usercontrol at runtime. it means that, when the right button is press, the note usercontrol is appear, when it pressed again it appear again beside the previous usercontrol. how can i access it like when user is click at one of the labels, that labels backcolor change to other color. it is means that a label that has been clicked is the selected label. and we can change the properties of that selected label.
View 2 RepliesI want to add a usercontrol to a panel. My code does not work: Panel1.Controls.Add(uc1)
View 1 RepliesI got a user control that has a few links, one of them is "add article". It's placed on top of the article and bottom of it. When the user clicks on it, the text changes to 'article added'.
But the text only gets changed for one of the links which has been clicked on. How can I make it so that both text changes no matter which one gets clicked?
I am trying to develop a control that'll allow the developer to populate a collection through markup (e.g. Properties decorated with the attribute PersistenceMode(PersistenceMode.InnerProperty). I have an example from Brian Chavez that more or less does what I want but I want to have the control inherit from UserControl and not Control.Here is the code I have in vb.net:
AggregateFeeds.ascx.vb
Imports Microsoft.VisualBasic
<ParseChildren(True)>
<PersistChildren(False)>
Public Class AggregateFeeds
[Code]...
As it is now when I try to compile I get a compiler error that simply says object instance not set to an instance of an object on the line above. If I take it out, the page loads just fine and the Settings object reflects the values in the markup. Why am I having trouble getting the collection to populate correctly?
How to convert UserControl.vb to dll? I'am using Microsoft Visual Studio 2010 Professional
View 2 RepliesI downloaded the next project from here:
[URL]
Now the project itself was built in C #, but the interesting part of me is "Toolbar.cs".
There is a way to replace the "Toolbar.cs" from C#, to VB? Or i must convert all the project? (Unfortunately, I do not know how)
I just want to build the part that I need(UserControl - "Toolbar.cs") in VB, and the rest can stay in C #, it does not matter to me.
I created Custom Paging User Control for a GridView. The Custom Control I am using at the top of GridView and Bottom of GridView. If I am clicking Next on top of Grid View, it is not effecting in the bottom.
View 1 RepliesI created a UserControl in a ClassLibrary project and then built it to generate the .dll file. I then want to create a new project and i added this .dll as a reference to my new project. but how do I add the UserControl in the class to my Toolbox? I'm using Visual Basic 2005 Express Edition.
View 2 RepliesI am running through an issue for which I am unable to find a solution.My goal is to:1- compile a x64 .NET library (vb) which has a simple User Control 2- Use this dll in a .NET WinForm application targeted to x64 CPU ONLY.
I have been able to do the first step, but now I am unable to add the library into the VisualStudio Toolbox. With our previous x86 version we had just to right click to VS toolbox, click on "Choose items...", then brows to the needed x86 assembly. If we do the same selecting a x64 lib (of course I am running vs on a 64 bit OS), we get the following message "[DLL PATH] is not a Microsoft .NET module."
I've created a usercontrol in VB that handles paging more efficiently than the DataPager (at least for very large datasets). I'd like to use it in a C# project, but I've been having trouble getting it to work.I've tried simply adding PagingControl.ascx to the C# project, but when I do that the markup and VB code behind don't seem to see each other. --Is this a namespace issue?I've tried adding the PagingControl.ascx to its own VB project, then adding that project to the C# project's solution, as well as a reference. --That almost works. I can register the PagingControl usercontrol in the markup. I can access the usercontrol's properties in the code behind, but any property that involves the UI of the usercontrol fails.
Its seems as if the usercontrol's form hasn't had a chance to load by the time the C# page's Page_Load event handler fires. --Maybe this is an "order of operations" problem? At what point in the C# page's lifetime should a usercontrol's form be loaded?
Have actually managed to create a UserControl complete with buttons, windows media player ... Right-Clicking in the toolbox I browsed to the dll and that brought the control into the toolbox successfully as VideoSourceControl.I can drag/drop this control onto the form and it is fine, buttons etc looking good. Now I want to create it programmatically - I actually want to refer to an array of them.On the form load I have
Public mySources() as SourceVideoControl and I get an error saying that 'SourceVideoControl is not defined'The dll that I loaded was called VideoMixerControl.dll?
how to use a ToolTip on a UserControl? I have a UserControl with some TextBoxes on it & I am adding the UC to a panel on my form at runtime. Now I want to set the ToolTip text for one of the TextBoxes, but I can't figure out how to do that. I have added a ToolTip component to my UserControl at design time.
View 20 RepliesI made a User control.I add two Panel in this Usercontrol. But i want one of panel keep control like container when i add my usercontrol in the from.but when i add user cousercontrol does not contrin any controlntrol in the from but my . how can i user usercontrol like container
View 3 Replies