i want to know how can i save data from datagrildview to XMl file with writexml method or any other method
here ds is my dataset and after updating datagrildview i want to update ds and save/update XML file
Currently I am saving data from my applications by saving a text file via a stream reader as a string. I have come to a problem. In my current application, I have an array of the following structure:
[Code]...
I have A combo box with 5 values in: How would i save all 5 of those values to my file?sw.WriteLine(CustomerIDTextBox.Text + ":" + CustomerFirstNameTextBox.Text + ":" + what????? Once these values are saved how would i go about retreiving them from the file and displaying them back into the Combo box?
View 3 RepliesI've got a problem saving asci Values to File as Byte. I must save hex values to file, for this case i used the following line: fs.WriteByte(&H2D) This works fine, but i need to do this autmaticly. My Sourcestring is 2995030. Tried to do something like &H(Hex(str)), but this failed.
View 8 RepliesI am using VB2008 now, couple of simple questions.
1) Is there some way to limit what my user puts in their textbox to numbers only? Or is there some way to check afterwards that the string only contains numbers and delete it if it contains anything else?
2) How to open a file, save the values of 5 text boxes into the file and then close the file?
I have a device with upon serial communication , it send the data as HEX values , (eg, C020042ABD0F91A103E400F929EBC) . I use the following code to get data from the serial port.
Dim fStream As New FileStream(sFileName, FileMode.CreateNew) ' creates new file
Dim bw As New BinaryWriter(fStream)
System.Threading.Thread.Sleep(1500)
ComTd.Read(data, 1, bCount)
[code]....
im having a problem saving text.. this is the problem i have a textbox that a multiline... now when i click the save button it pop up a save file dialog.. now i want to do when the user click the ok button in a save file dialog it will save as a text file and their file name is the user input into the save file dialog..
i use the system.io.streamwriter but i dont how to save the text in the textbox..
I am trying to save text written in an Richtextfield into a .txt file. The problem is that the vbCrLf's are not stored. The *.txt file is written in one line.
View 1 Repliesi am having a problem saving the file, when i save the file in the directory (with save as)
C:UsersuserDocumentsvb Toolkit save
Now i try moving the vb files by save as again to
G:Backupvb Toolkit save
When i load the file up it says that my form1.vb missing or deleted but when i check in the files
I am having trouble saving a class to a file via Serialization. I am getting this error:
Type 'System.Drawing.Graphics' in Assembly 'System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' is not marked as serializable.
I have changed the:
Public Class cJigsaw
to:
<Serializable()> Public Class cJigsaw
The next line in my class is:
Public img As Bitmap
I tried adding the <Serializable()> attribute to this code, yet it has this error:
Attribute 'SerializableAttribute' cannot be applied to 'img' because the attribute is not valid on this declaration type.
I could find on using the SaveFileAs Dialog control would get the part where the code should be to actually write the file to disk, and there would be this comment:
'insert code to write file here
or something similar. So anyway, I thought this might be of use to someone else in a similar situation. This is what I came up with to finally "save" a file with the SaveFileAs Dialog. In this situation, I wanted to save the current document of the WebBrowser1 control via the SaveFileAs Dialog when the user clicked the btnsave button...
Private Sub btnsave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnsave.Click
Dim saveFileDialog1 As New SaveFileDialog()
[Code]....
I basically have a program where people type in their username and password, and then once button1 is pressed the program takes you to a website and logs in for you. The whole point of this is to fast the process.
[Code]...
I'm a novice, messing around with input boxes in VB 2010 Express. I know most programmers recommend not using input boxes except for the simplest things, but what I'm doing IS the simplest thing. Besides, I'm really just experimenting for the sake of learning.
I want a few input boxes to appear, one at a time. Let's say there are six input boxes in this project. The user can input anything he wants in each input box. After the user has entered text into the six input boxes, the program should write the text to a file. This is the part I'm having trouble with. [Code]
I haven't figured out if title.input is correct or not, or if I need something instead of commas in between each item. And the headers (i.e. the "First Name" stuff) needs to be added in there also, but I need to get the syntax of the code right first before getting to that.
I am trying to create a console application that allows me to read the contents of a text file and saving the data by specific name in a set of files. For example, the text file I am going to read is a tab delimited file. Some content of the file includes full name, school, location, and whatnot. I want to save the content by school name in a set of files that have the school names. In this case, everyone that attends "Central" will be saved in a file named Central.txt.Everyone that attends "Central Park" will be saved in a file named Central Park.txt.These are the sub procedures I came up with so far:
Readfile()
'Use StreamReader
WriteFile()
And I think I am on the right track of reading the text file:
Dim objStreamReader As StreamReader
Dim strLine As String
'Pass the file path and the file name to the StreamReader constructor.
[code]....
i need to save an array of intptrs as a part of a structure in a file, vb.net gives me "File I/O of a structure with field 'pList' of type 'IntPtr' is not valid." error, ok i figured and tried to convert them to integers and while it worked for other singular intptrs it did not for the array as it just throws me a conversion error. I then tried rebuilding the array in the new sub of the save structure and while that sorta worked(i think) it then gives a "bad size" error when saving. Im out of ideas, saving the array elements one by one would be suicide as the amount varies and is well in hundreds,
View 1 RepliesI am using this code for save the items into a text file:[code]I want to save the items without blank lines like
-item1
-item2
-item3
I have used the following code too save a notepad file; [Code] The code saves files but only in the 'Application.StartupPath' folder, the save dialogue starts in the correct place a quizzes folder inside the debug folder but files can't be saved here or in folders inside it, even though you can browse them in the dialogue. I want it saving where navigated to in the dialogue.
View 2 RepliesI'm making a simple little program. It's going to save the image in the clipboard (from pressing Print Screen) to the folder that the .exe is in. My problem is trying to find out how to save the image file with a user-specified name, such as "Image", then adding numbers to it. So it would be like Image_00001, Image_00002, etc. I would like to make the name be specified using a textbox (pretty easy). I know how to get it to save as different image formats and all, and I know how to get it to save as a hardcoded name in a hardcoded location, but that it isn't what I'm aiming for. If you've ever used the screenshot function of Fraps or MSI Afterburner, then that's basically what I'm trying to make here.
I've already searched these forums and did some Googling, but couldn't find anything that I was looking for. Not even a sample program with something like this. I found something in the CodeBank, but it's all the stuff I've already gotten implemented.
[Code]...
I recently made a simple pseudo-encryption program that changes each character into another. It is capable of encrypting and decrypting a string. This can also be done to any text file as well. The characters range from ASCII 32-254 (This on it's own may be an issue because of #127 being DEL).
Because I believed my own coding may be at fault, I attempted this with Triple Des with identical results.For Triple Des, the requirements for en/decryption was:
Encrypt: String to Byte
Decrypt: Byte to String
And to change them either direction, I used UTF8. I also attempted ASCII and UTF32, but I don't know what I should do. I am considering dropping this but I want to learn problems like this because I am currently in college and haven't started my core classes for programming yet and want the head start.
The point where I have come into a problem is attempting to do this to another file type like an image. I looked at the results from encrypting then decrypting and the results were similar, but it seems file encoding must be the culprit.
The object is to load an image into a picturebox, then save a new copy of the image in a different location, but with the height and width of the image box not the original file's height and width but I can't figure it out. I've got the loading and saving working no problem but getting it to adopt the new size is stumping me, it just keeps saving with the original file's size properties
View 2 RepliesIn this report I put an image box named logo the select image Source is set to EXTERNAL and in the use this image I have Parameters!LogoPath.Value.I would like the users to be able to pick their own logo.
View 1 RepliesHow would I go about reading a textfile, finding values and using the values in the program?Now I want the program to read the text file, find [1], use the first line after [1] as value for a variable, and the second line as value for another variable. After that I will run some code with the values and then do the same thing again for [2] etc.
View 2 RepliesHaving a little issue with my boolean statement. It is not changing the value to true after you click it. Its a basic function just not working correctly and Im pretty stumped on why. I mean its a simple yes or no concept. The button is on or off is the basic concept.
Private Sub btn_Backhoe_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btn_Backhoe.Click
Dim InUse As Boolean
'Switch On/Off[code].......
Have read most of the null value posts here, and I have managed to get things working as far as a "next record" button for my database application form (there's some awesome advice on this forum!). I have just one question, though. How do you manage saving of blank text box values from a form? I am using JET, but when I try to save an updated file that has a null value, it is not letting me. I got around it by forcing the text boxes with null values to contain " ", but obviously this is not the bext solution!
View 1 RepliesIm creating an application that allows me to enter a product with a cost. I want all the costs to be saved in an array and then calculate the total cost and display it in a label. I looked for hours in my textbook and cant seem to get this part.
[Code]...
I've a got a homework assignment that chooses one of four values in a list box, stores it in a text file. Secondly, on the display click event it should access the text file, read the line, store it in a variable and then display the totals in a text box. Works sort of fine except that it doesn't display the totals correctly. Code for both buttons is below. The variable are assigned in the mainform (Tried also in the display button and didn't change anything). The save button works fine and stores fine in the text file, it's just the reading that's the problem.
Private Sub saveButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles saveButton.Click
'save the new vote choices to a file
Dim votes As IO.StreamWriter
votes = IO.File.AppendText("votes.txt")
Dim voteSelected As String = CStr(commercialListBox.SelectedIndex)
[Code] .....
I have a form in an application that I'm building and in it I have a datagridview that when a user clicks a checkbox on a line in the datagridview and "submits" the data, then the form will insert all of the data on that line (along with the code "Holiday") into a database. Currently if I click in the checkbox on any line other than the first line and put a line break on the "Try" statement, and then fire the submit_onclick event, I'm never reaching that break point but if I click on the checkbox on the first line and submit that data, that works and it behaves at I stated above. Here is the code as it stands currently:
Code:
Private Sub holidaysaveButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles holidaysaveButton.Click
For Each dr As DataGridViewRow In DataGridView1.Rows
[Code....
My windows form as a bunch of textboxes on it that basically let the user put in different positions/forces that a test cycle then uses. I am trying to let the user save their profile settings/open the settings so they don't have to input the same values every time they want to run the same test. Here is my code so far. basically, when i save my csv file, and open it, all 6 textbox values are plopped in the first textbox instead of being distributed to their original boxes. I just read about a "split" function
code
Private Sub SaveProfileToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveProfileToolStripMenuItem.Click
SaveProfileDialog.ShowDialog()
Dim sw As StreamWriter
[Code]....
We have a listbox in our MVC View and the user has the ability to highlight multiple values. I'd like to be able to save those selected values(if possible?) as a comma delimited cell value in our '08 SQL Database.
The image below shows what I am attempting to explain. Note the selection in the LISTBOX
This is where we save the passed in values from the Positionnumber DDL (Listbox w/ mulitple highlights).
> <HttpPost()>
> Function Edit(wsmonitor As WSMonitor, ByVal vbpositionnumberDDL As Integer, ByVal PassedCounty As Integer, ByVal
> MonitorTypeDDL As String) As ActionResult
[Code]....
I have 50 checkboxes for 50 american states. The user can choose all 50 or only 1( so basically any number he wants). Based on his choice, I want to insert or update the table in sql server 2008. e.g- Color = blue and chk1=check, chk2= check and chk3 = check (chk = checkbox).
Now the user wants to ad 10 more states to this or remove these 3 and add 5 more. so u basically get the idea. the table in database looks like this -ID Color State_id
There is a table called states, so stateid shall come from there. so how do i do a loop insert or update in vb.net?