Visual Studio 2010 Code Profiling During Debug
May 1, 2012
I am working on a Visio Addin in VS2010 Professional and am looking for hot spots (specifically around a COM object) while debugging the application. I have found a number of profilers that can profile existing .NET applications, but none of which (that I have seen) support debugging. Further more, because this is a .NET add-in rather than a full standalone executable I'm not sure how they'd fair. [code] Has anyone found a profiler that can be used during a VS2010 debug session?
View 2 Replies
ADVERTISEMENT
Jul 28, 2010
I upgrade my computer to win 7 64 bit and run visual studio 2008, When I try to debug my old dotnet application (orgiinal from XP) it wont allow me to change any code while stop and debug. It said 'Change to 64 bit application is not allowed.
View 3 Replies
May 9, 2011
I am using Visual Studio Ultimate. I have made a fairly long program which worked fine.One day I find that the debug button was disabled and both the build and rebuild buttons do not work. I have tried opening the same project files in Visual Basic Express 2010 but still, the sane problem.
View 4 Replies
Dec 10, 2011
I have a .exe in the mix with my .vb files in visual studio 2010 and I can't figure out a code to run it. I added it through the add existing if that means anything.
Form1.vb
Form2.vb
form3.vb
TEST.exe
View 2 Replies
Dec 12, 2011
When I try to debug my WPF application in visual studio 2010 it launches two versions of my application. Both are linked to the debugger. has anyone seen this before or knows a way to fix it.
View 1 Replies
Mar 10, 2011
I have break points but it won't stop on them. I know for a fact that the break points are located where it should stop.
View 5 Replies
Dec 15, 2010
My visual studio addin project will not longer build and run in the debugger. I get the following error message when I try to run it:A project with an Output Type of CLass Library cannot be stared directly.It was working about 5 months ago just fine but I opened it and and ran it for the first time since then and get this message. It used to startup another instance of Visual Studio with the addin installed via a proxy addin file. How do I configure the project or solution to make it behave this way again? Do I need to manually tweak the project of solution file?
View 1 Replies
May 25, 2011
how to Change VB project code to C# using Visual Studio 2010?
View 3 Replies
Dec 29, 2010
Just started a new project and was kind of bummed out that instead of creating interface Im forced to spend quite large amount of time creating objects, INSERTs,UPDATEs.. that kind of thing. Mainly because it's booring. Anyway, I was wondering if there are tools in VS2010 for visual basic that would allow someone to generate clases and INSERT, UPDATE, DELETE stored procedures based on database structure OR creat INSERT, UPDATE, DELETE procedures and database structure based on class structure.
View 2 Replies
Sep 20, 2011
I only want it to display the code only related to the button i double click not the whole entire code of the program unless it automaitcally does this i am not sure i am new to visual studio and programming!
View 5 Replies
Dec 28, 2011
Currently, Smart Indent in VS 2010 is giving me lots of headaches. Everytime I try to put each parameter of a Sub or a Function into one line like
Private Function Foo (ByVal a As String, _
ByVal i As Integer)
[code].....
View 1 Replies
Oct 28, 2010
Fortran Samples for Visual Studio 2008 will not debug or run. I can't get the sample programs to run. I am a engineer not a programmer
View 2 Replies
May 21, 2009
I want the designer to catch the error when I am debugging and I want the user to see my friendly message if an error occurs for them. I know I can acomplish this with the following:
[Code]...
I do not want to have to write all the #statements and having them cluttering up my code. It seems like this should be a common need and there has to be a better way. Does anyone know a better way?
View 4 Replies
Aug 22, 2011
I set my computer then install VB6.0 run VS2005 VB.net 2005 error example: Visual Studio can not start debugging because-the debug target exe .'... 'is missing.Please build the project and retry, or set the OutputPath and AssemblyName properties appropriately to point at the correct location for the target assembly. same machine can use the same VB6.0 and vb.net 2005 is not?
View 13 Replies
May 4, 2011
I have a solution with multiple projects (vb.net) , with some projects I have the optino to choose between the configuration: and in other projects I don't have that option. (I've had the option before). Has anyone an idea to show the option again. I can change it in project file (with notepad) but that's not userfriendly.
View 1 Replies
May 19, 2009
I've been assigned a web app written in VB using VStudio.net 2003. I am trying to configure the source on my localhost (VStudio 2008) so I can explore and learn about the current app (before I begin any real changes) and I cannot get debugging working for the web service project(s).
Symptom 1: "Unable to automatically step into the server. The remote procedure could not be debugged. This usually indicates that debugging has not been enabled on the server. See help for more information". This happens when I try to F11 (stepInto) the proxy class which invokes my actual web method.
Symptom 2: Pre-setting a breakpoint in my .asmx file code on the statement that will be invoked does not work (i.e. the debugger simply doesn't stop). Having described the situation, here's how my VStudio Solution is configured: Service1 - project created from the VB - WEB - ASP.NET Web Service Application template; this Service1 project contains my main .asmx source code I want to debug. Web.config for this project contains compilation defaultLanguage="vb" debug="true"
[Code]...
View 4 Replies
Feb 23, 2010
This started happening randomly yesterday. When I press F5 to test my project, an old build of the program (circa yesterday afternoon) launches. No changes (and I've tried in a few different files) are reflected in the project. However, and this is truly perplexing, if I go to Build --> Build from the Menu bar, the output .exe in the /bin/release/ directory DOES include all the recent changes.
[Code]...
View 2 Replies
Aug 22, 2011
I set my computer then install VB6.0 run VS2005 VB.net 2005 error example: Visual Studio can not start debugging because-the debug target exe .'... 'is missing.uild the project and retry, or set the OutputPath and AssemblyName properties appropriately to point at the correct location for the target assembly. same machine can use the same VB6.0 and vb.net 2005 is not? do not fix the error, for example, I run with the above error, see attachment (Thumbnails.rar)
View 8 Replies
Nov 30, 2007
I've created a SSIS script task for debugging: printing SSIS variables and their values. This is done with (a maybe restrictied version of) Visual Basic. Rather then creating a message box or writing to a file I'd like to write to the debug output of Visual Studio - or to some other window available in Visual Studio when running a SSIS task. Something like fprintf( stderror, "Hello world!" ) in C. I suppose I need to get the Stream Writer Object connected with the debug output. But how do I do this? I also tried Console.WriteLine() but this didn't succeed.
View 3 Replies
Oct 13, 2009
I have a several C# console applications that basically parse tons of data in memory (LINQ) and output the results to a text file. Now, forget about the writing to the text file for a minute because this is not where the problem is occurring.
When I run the application in debug mode, I will never get it to utilize more than 50% of cpu usage. It will be parsing/massaging hundreds of thousands of records, but only go X fast and utilize 50% of the cpu AT MOST (as viewed in the Task Manager).
I would really like to use 100% of the CPU to make the processing go faster. Does anybody have any insight? I am running Windows XP Professional with Service Pack 3. I have Visual Studio 2008 Professional with Service Pack 1 installed. I have manually set the affinity of the process in Task Manager to a single core on the dual CPU. Sometimes I can catch it utilizing 51% or 52% of the CPU.
View 5 Replies
Nov 21, 2009
I get this error every time I try to debug.But, I do not know how to fix it or why it started occurring.
View 1 Replies
Feb 17, 2010
Will i be able to successfully install 2010 beta 2 side by side 2008? because i want to test 2010 features and some development toolkits such as silverlight while i don't want to uninstall my visual studio 2008 professional.
View 2 Replies
Jan 9, 2012
I realize this post is rather long, but I wanted to give all the information up front instead of people having to ask me for more information.At the end of the re-installation of Visual Studio 2008, there is this message:
"Microsoft SQL Publishing Wizard: [2] Error: Installation failed for component Microsoft SQL Publishing Wizard. MSI returned error code 1638" in the log file dd_error_vs_procore_90.txt.
I have searched on Google for this whole message and found some references to this error, but I have done what they said worked for them and it did not fix the problem for me.When I searched for just "MSI returned error code 1638", I got that it cannot install something because it is already installed:"Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel".In Add/Remove Programs I see these two programs:
Microsoft SQL Server Database Publishing Wizard 1.3
Microsoft SQL Server Database Publishing Wizard 1.4
Are these programs/versions what the error is refering to? Am I safe to remove them and depend on the similarly-named item which would be newly installed with Visual Studio 2008 - "Microsoft SQL Publishing Wizard"? I still use SQL Server 2000 and 2005 on my computer, as well as 2008. I had installed VS 2008 on my computer before without this problem and also have VS 2005 and 2010.
View 1 Replies
Aug 5, 2011
Does anybody know which version of Visual Studio 2010 contains the full set of Visual Basic SharePoint Templates? I am about to embark on a project to create Visual Web Parts to be used in a SharePoint report.
At the moment I am using Visual Studio 2008 and even though the WSPBuilder is installed none of the relevant SharePoint templates are present.Having searched SO and the web, most advise to install the templates via the Visual Studio command prompt: devenv /installvstemplates
Alas the Visual Studio command prompt is also missing from my VS2008 installation.So, the question remains: which version of VS2010 contains what I need for pain-free SharePoint development? There is a rather large price different between VS2010 Professional and VS2010 Premium, so can anyone tell me if the cheaper version (VS2010 Professional) contains all the Sharepoint templates?
View 3 Replies
Nov 25, 2009
I am just wondering how I can add Direct X references to Visual Basic in Visual Studio 2010 Beta 2. I cant find them in the .NET reference list, or the reference list, or anywhere. I downloaded the Direct X SDK for August 2009, but I can not add the .dll files to the reference list. Is there anything I can do to add them? I need the references for programming reasons.
View 5 Replies
Jul 6, 2011
How do I add a comment to code snippet in Visual Studio?
View 18 Replies
Jan 15, 2012
I want to use "OpenGL" in my project. Is it possible to associate it with "Visual Basic" application developed in Visual Studio 2010? If yes then how can we do it.
View 1 Replies
Apr 20, 2012
I have a project in visual basic 2010 and want to convert it to visual studio 2010 so I don't have to chose the "open with" every time. Is there a tutorial on how to do this?
View 4 Replies
Mar 9, 2012
To reproduce the error I'm getting:Create a new Visual Studio 2010 ASP.NET web site in Visual Basic, targeting .NET 2.0Type "Public Property Test As String" Observe "Visual Basic 9.0 does not support auto-implemented properties." error Visual Studio 2010 is happy to use VB 10 against .NET 2.0-targeted Windows Forms applications, this only appears to be an issue with ASP.NET.Is there a way to force Visual Studio 2010 to use VB 10 when targeting .NET 2.0?
View 1 Replies
Jul 6, 2010
have just overlooked something somewhere...I am writing VB.NET stuff in VS2010 on Windows 7 64-bit. It seems to build by default for a 32-bit target, how to I tell it to make a 64-bit executable?
View 2 Replies
