I set my computer then install VB6.0 run VS2005 VB.net 2005 error example: Visual Studio can not start debugging because-the debug target exe .'... 'is missing.Please build the project and retry, or set the OutputPath and AssemblyName properties appropriately to point at the correct location for the target assembly. same machine can use the same VB6.0 and vb.net 2005 is not?
View 13 RepliesI set my computer then install VB6.0 run VS2005 VB.net 2005 error example: Visual Studio can not start debugging because-the debug target exe .'... 'is missing.uild the project and retry, or set the OutputPath and AssemblyName properties appropriately to point at the correct location for the target assembly. same machine can use the same VB6.0 and vb.net 2005 is not? do not fix the error, for example, I run with the above error, see attachment (Thumbnails.rar)
View 8 RepliesI get this error every time I try to debug.But, I do not know how to fix it or why it started occurring.
View 1 RepliesFrom the attached image, I guess you can tell what is my trouble.I press F5 then I get this pop-up.
View 8 Repliesi am working on a microwave app its very important anyways ill give up what code ive got so far and such but when i try to run it i get this error message: Visual Studio cannot start debugging because the debug target Microwave.exe is missing Please build the project and retry or set the OutputPath and AssemblyName properties appropriately to point at correct location for the target assembly. [Code]
View 5 RepliesI'm using visual studio express 2008, I wrote my code for a project and then when I tried to debug it I got a few errors but one main one that says this. Visual Studio cannot start debugging because the debug target "".exe is missing Please build the project and retry, or set the output path and assembly names appropriately to point at the correct location of the target assembly. Since this is my first time debugging a program with this particular instance of the program, I am in shock. Does anyone know how to fix this issue?
View 6 RepliesI have a client/server application using the .Net 2.0 Framework. I'm using Visual Studio 2008 to build and manage code.When I run either a Debug or Release version of the application simply by starting the .exe, I get an insert statement on the database that tries to insert a "0" for the foreign key of a table, triggering an error because the primary key of the other table is not 0.When I run the application by hitting the play buttton ("Start Debugging"), the insert statement uses the correct foreign key.In the first case, this happens even when I "Attach to Process" to the Debug version after it's started. My question: what's the difference between attaching to the debug version of the application after it has started and starting the application from the debugger?
View 6 RepliesI am trying to use sample FedEx Web Service code written in VB.NET to retrieve shipping rates.
The call returned rate information, but it returned rates that are way too high and do not match those shown on their web site for the same shipping parameters.
Their support team is willing to investigate the discrepancy if I can provide them the XML data, SOAP transaction I presume, but I do not know how to get at this.
I have a vb.net project which sometimes, when running in the IDE, suddenly hangs. Normally this wouldn't be a problem. Just hit 'pause', look at the currently running threads, and find the deadlock (or whatever else). But now I'm running into a situation where not only does the program hang, but trying to pause it causes visual studio itself to hang. In order to get control back, I have to kill the program-being-debugged's process, at which point visual studio comes back to life and says it was unable to pause execution. This is frustrating, because killing the process means the program state is lost (of course), so I don't know where the hang is.
View 4 RepliesI have a WPF application running in debug mode, and I would like to change the XAML while the application is still running. I'm not asking for Edit-and-Continue. I don't mind that I will have to restart the application for the changes to become effective. I just want to be able to make changes to the XAML file while the application is still running, rather than having to (1) remember what I want to change in the UI, (2) close the application, (3) recall what I want to change and make the change.
View 1 RepliesI am trying to create a new library (.dll) for use in my SSIS project. I dont have any prior experience of creating these kind of projects. So please bear with me.
When I try to debug the program, it throws the following error
What would be the best way to debug the following code. I know that it maybe wrong, but I am trying to learn this.
CODE:
When I try to debug my WPF application in visual studio 2010 it launches two versions of my application. Both are linked to the debugger. has anyone seen this before or knows a way to fix it.
View 1 RepliesI have break points but it won't stop on them. I know for a fact that the break points are located where it should stop.
View 5 RepliesMy visual studio addin project will not longer build and run in the debugger. I get the following error message when I try to run it:A project with an Output Type of CLass Library cannot be stared directly.It was working about 5 months ago just fine but I opened it and and ran it for the first time since then and get this message. It used to startup another instance of Visual Studio with the addin installed via a proxy addin file. How do I configure the project or solution to make it behave this way again? Do I need to manually tweak the project of solution file?
View 1 RepliesIt happens quite frequently, more times per day, that with Visual Studio 2010, during the debugging, when I used Immediate commands like:I receive the following error:
'NamedVariable' is not declared. It
may be inaccessible due to its
protection level.
I'm testing my Visual Basic .net application by running it in Visual Studio express.Sometimes it runs OK, but other times I get an exception (details below, if useful). I'm not sure why I get the exception as the particular part of the application that I am testing re-uses code that works OK for other features.
What should I check, what would give me a hint as to the root cause. Things I tried so far are: Rewriting some of the code to be more robust. The outcome of this was that this approach was getting out of control - I was correcting everything. I made changes such asing alternative libraries (e.g. replacing CInt with convertTo etc). Some lazy declarations, but it occurred to me that there was no problem with these with the code before my changes. And every change I seemed to solve uncovered yet another problem, another different exception So I thought something must be fundamentally wrong with my installation, and a search found discussion group posts from people experiencing something similar. The suggested remedy would be to re-install the .net framework. So I did that and the problems still occured.
Any thoughts on approach to get to the root of the problem? I'm not asking for a solution but some fresh ideas would be very welcome.
[Code]...
I upgrade my computer to win 7 64 bit and run visual studio 2008, When I try to debug my old dotnet application (orgiinal from XP) it wont allow me to change any code while stop and debug. It said 'Change to 64 bit application is not allowed.
View 3 RepliesFortran Samples for Visual Studio 2008 will not debug or run. I can't get the sample programs to run. I am a engineer not a programmer
View 2 RepliesI want the designer to catch the error when I am debugging and I want the user to see my friendly message if an error occurs for them. I know I can acomplish this with the following:
[Code]...
I do not want to have to write all the #statements and having them cluttering up my code. It seems like this should be a common need and there has to be a better way. Does anyone know a better way?
I am using Visual Studio Ultimate. I have made a fairly long program which worked fine.One day I find that the debug button was disabled and both the build and rebuild buttons do not work. I have tried opening the same project files in Visual Basic Express 2010 but still, the sane problem.
View 4 RepliesI am working on a Visio Addin in VS2010 Professional and am looking for hot spots (specifically around a COM object) while debugging the application. I have found a number of profilers that can profile existing .NET applications, but none of which (that I have seen) support debugging. Further more, because this is a .NET add-in rather than a full standalone executable I'm not sure how they'd fair. [code] Has anyone found a profiler that can be used during a VS2010 debug session?
View 2 RepliesI have a solution with multiple projects (vb.net) , with some projects I have the optino to choose between the configuration: and in other projects I don't have that option. (I've had the option before). Has anyone an idea to show the option again. I can change it in project file (with notepad) but that's not userfriendly.
View 1 RepliesI've been assigned a web app written in VB using VStudio.net 2003. I am trying to configure the source on my localhost (VStudio 2008) so I can explore and learn about the current app (before I begin any real changes) and I cannot get debugging working for the web service project(s).
Symptom 1: "Unable to automatically step into the server. The remote procedure could not be debugged. This usually indicates that debugging has not been enabled on the server. See help for more information". This happens when I try to F11 (stepInto) the proxy class which invokes my actual web method.
Symptom 2: Pre-setting a breakpoint in my .asmx file code on the statement that will be invoked does not work (i.e. the debugger simply doesn't stop). Having described the situation, here's how my VStudio Solution is configured: Service1 - project created from the VB - WEB - ASP.NET Web Service Application template; this Service1 project contains my main .asmx source code I want to debug. Web.config for this project contains compilation defaultLanguage="vb" debug="true"
[Code]...
This started happening randomly yesterday. When I press F5 to test my project, an old build of the program (circa yesterday afternoon) launches. No changes (and I've tried in a few different files) are reflected in the project. However, and this is truly perplexing, if I go to Build --> Build from the Menu bar, the output .exe in the /bin/release/ directory DOES include all the recent changes.
[Code]...
I've created a SSIS script task for debugging: printing SSIS variables and their values. This is done with (a maybe restrictied version of) Visual Basic. Rather then creating a message box or writing to a file I'd like to write to the debug output of Visual Studio - or to some other window available in Visual Studio when running a SSIS task. Something like fprintf( stderror, "Hello world!" ) in C. I suppose I need to get the Stream Writer Object connected with the debug output. But how do I do this? I also tried Console.WriteLine() but this didn't succeed.
View 3 RepliesI have a several C# console applications that basically parse tons of data in memory (LINQ) and output the results to a text file. Now, forget about the writing to the text file for a minute because this is not where the problem is occurring.
When I run the application in debug mode, I will never get it to utilize more than 50% of cpu usage. It will be parsing/massaging hundreds of thousands of records, but only go X fast and utilize 50% of the cpu AT MOST (as viewed in the Task Manager).
I would really like to use 100% of the CPU to make the processing go faster. Does anybody have any insight? I am running Windows XP Professional with Service Pack 3. I have Visual Studio 2008 Professional with Service Pack 1 installed. I have manually set the affinity of the process in Task Manager to a single core on the dual CPU. Sometimes I can catch it utilizing 51% or 52% of the CPU.
Suppose you have written a Sub Procedure in a Standard Module named Main and designated it as the project's Start Up object. You also have a form that is to be displayed once Main has executed. If, when you run the application, the form does not display on the screen, what is the most likely cause?
View 3 Replieshow to start visual basic studio 2005, this is my first time.
View 3 Repliesi wan to create a application that can start a process when page load, and a button to hide and show the process.
Dim a As Integer
a = Process.Start("notepad.exe").Handle.ToInt32
ShowWindow(a, SW_HIDE)
i only can start the process, but cannot hide it.any miss take in my code??
everyone know the start page of Visual studio it seems to be a web page, how I can make like it in my applications?
Edit, Add more details:
let us say that I want to show the recently opened forms or the Tip of this day, who I can do that, where to store the data and how to generate the HTML file?