Asp.net - Updating A DataRepeater Inside Updatepanel With IAsyncResult Not Working?
Oct 14, 2010
I am having trouble binding data to data repeater when I use ISyncResult.This is what I am doing.There is a button inside a Update Panel that gets the input from the user and calls a function that returns a dataset that I then bind to data repeater which is also inside a update panel.What I did is that I made a delegate to this function, now I am calling this function like this
[Code]...
I am having hard time figuring out why the data repeater is showing no data.While debugging this I see that the dataset is getting the data and is passing the the "ds" but nothing is showing up on my page even though the data is being passed to controls inside data repeater while I am debugging.
View 1 Replies
ADVERTISEMENT
Aug 27, 2009
I have an asp.net gridview that is originally bound to a sqldatasource control, but when the user presses an external button, it instead gets the contents of a datatable rather than a SQLdatasource control. I therefore had to write code in the PageIndexChanging event of the gridview to allow for paging. My code is as follows:
Protected Sub gvEvents_PageIndexChanging(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewPageEventArgs) Handles gvEvents.PageIndexChanging
gvEvents.PageIndex = e.NewPageIndex
gvEvents.DataBind()
This worked beautifully until I added an AJAX update panel so the whole page wouldn't postback every time it paged, and paging stopped working. I debugged it and discovered that it is actually calling the PageIndexChanging event, but nothing is happening. I searched the web and found a few people with the same problem, but their solutions did not work for me. There was one on this site whose problem was solved by the following:
In PageIndexchanging event, where you bind data to grid, make sure, data is again fetched from the DB
I don't know what that means; my data was being bound as demonstrated above. I have "enable paging" set to true and EnableSortingAndPagingCallbacks set to false.
I am including my markup for the updatepanel below.
<asp:UpdatePanel ID="UpdatePanel2" runat="server" UpdateMode="Conditional">
<Triggers>
<asp:AsyncPostBackTrigger ControlID="ibtnSearch" />
</Triggers>
[CODE]...
View 3 Replies
Jan 15, 2011
I have added a datarepeater to my project. I have added several items from datasource.
Some of the items need to be updated constantly. I tried to put my filler of the datarepeater to a timer, but it caused several problems.
Is it possible that I could put only the labels that need to be updated, to the timer. If so, how to give reference that which datarepeater row this lable belong to?
View 1 Replies
Nov 10, 2010
A little pseudo code to provide some background:I have an ASPX with a placeholder and a buttonWhen the button is clicked it adds a web user control (uc1) to my placeholderThe uc has a button
View 1 Replies
Nov 12, 2010
Why this code doesn't work inside UpdatePanel controls I have in webform : four CheckBoxes and one TextBox
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code]...
Coding was working fine outside the UpdatePanel but not working inside update panel what is wrong with it?
View 2 Replies
Jun 5, 2012
I have a UserControl inside UpdatePanel, how to update the user control when clicking a button
View 1 Replies
Apr 15, 2011
I'm trying to speed up my Repeater so that not as much HTML has to be resent via the AJAX UpdatePanel on each call.
So here's what I have (a very much simplified version):
<asp:Repeater ID="rptContactSteps" runat="server">
<ItemTemplate>
<p>Script:<br /><%#mobjSDIT.FormatText(Eval("script"))%></p>
[Code]....
So, when I click 'btnSaveAndCompleteLastStep' I want all the UpdatePanel in 'rptContactSteps' to update. Having the UpdatePanel inside the ItemTemplate should help prevent having to re-load the html/text that populates the Eval("script") & Eval("notes"), since the value of these variables could be very large and over a 3G connection this could be very costly (in time & money).
I though by adding the async trigger it'd work as I have used this type of trigger before, but not when inside the Repeater. Currently the UpdatePanels aren't getting updated at all, except from the one from which the button was pressed.
View 2 Replies
Mar 11, 2011
I've got a fileupload control inside of a gridview so that each row (item from the database) can have an attachment associated with it. I've got a button next to the fileupload control (besides the default browse... button to select the file) to actually take the file and upload it to a file server.This works great if I use this button "Upload". However, underneath my gridview I have another imagebutton that is outside of the gridview, its just sitting on the form / page.The idea of this "Update" button is when end users make changes to the grid I can simply loop through the grid and update the values they have entered to the database. This also works great.
Now here is my issue assume a user has 3 rows in the grid view. On 2 of these rows he decides to add an attachment but he never clicks the "Upload" button he only uses the standard browse button to select the file. Now instead of clicking the "Upload" button that is on the grid view he ends up clicking the "Update" button outside of the grid thinking that it will save his attachments.
So I decided to write code to grab the fileupload control from the grid using .FindControls("NameOfFileUploadControl") in my Update button loop where I loop through all the rows. Then I check if myFileUploadControl.HasFile property to see if there exists a file and if there does upload the file then continue with the code.
The issue is when I click this "Update" button .HasFile always returns false even though I can see the text string of the path in the fileuploadcontrol textbox (the standard one next to the browse button). Is it because this goes back to the page load event and checks if it is a post back? What causes this and how can I fix it?
edit:Im adding some code because im still confused with this
Protected Sub SaveGrid()
For Each Row As GridViewRow In Me.gvLineItems.Rows
Dim f As FileUpload = CType(Row.FindControl("fuAttachment"), FileUpload)
[code]....
This method gets called on a click of a button... The fileupload control is in an of a gridview that is wrapped inside of an UpdatePanel:
<asp:FileUpload Width="90px" Font-Size="xx-small" ID="fuAttachment" runat="server" />
So why is this property always returning false?
View 1 Replies
Nov 21, 2011
I have a GridView which is continually rebound using a timer and is within an updatePanel so the page doesn't refresh continually (each row has a countdown sequence so the gridview needs to continually get updated). Inside the gridview i have an imagebutton with an OnClick method. Previously to get the OnClick method to fire I would make sure the gridView wasn't in an UpdatePanel and that the pageload databinding of the gridview was in an "If Not IsPostBack". With the Timer though I can't have the gridview binding an an "If Not IsPostBack" and it needs to be in an UpdatePanel. Is there a way to use an UpdatePanel and "If Not IsPostBack" and still get the OnClick method to be called?
Here's some of the code, if my explanation didn't make complete sense:
UpdatePanel/Timer/GridView
<asp:UpdatePanel runat="server">
<ContentTemplate>
<asp:Timer ID="timerCountDown" runat="server" Interval="1000" OnTick="timerCountDown_Tick"></asp:Timer>
[Code] ....
View 1 Replies
Dec 15, 2011
I'm creating a number of textboxes, all calling a function during the onchange event to update their value to the database. These boxes are dynamically created in the backend because the data changes based on specific criteria that can be changed on the page. Here's the creation of the boxes:
Dim t as TableRow
tC = New TableCell
Dim txtBox As New TextBox
[Code]....
When I enter a number into the Textbox, the event fires as expected, but it fires twice.
View 1 Replies
Feb 10, 2012
Description of problem: I have an updatepanel that works fine in all browsers in a simple frame layout.
When I include jquery-1.7.1.min.js [URL].. on my page it breaks the updatepanel such that any control no longer does a partial postback - but instead does a full post-back, this behaviour only seems to happen in internet explorer (tested only in ie8 so far).
[Code]...
You can confirm that the update panel works nicely by changing the background colour and clicking dates on the calendar, by opening pdhtest.aspx. the frame-set should break this behaviour for internet explorer 8.
View 1 Replies
Mar 30, 2011
I have a asp:textbox inside an AJAX updatepanel. My goal is to be able to update other controls, such as a asp:listbox that is inside the same updatepanel, while I type in the asp:textbox. I can easily do this using javascript. However, I am under a restriction, that is, I cannot use javascript.
View 1 Replies
Mar 31, 2012
I am creating dynamic text boxes on button click and then showing values on another button click. It works fine until I use ajax updatepanel. In that case values are not shown when I hit second button. My aspx code is:
aspx markup is:
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<div id="divRT" runat="server">
[Code].....
View 2 Replies
Nov 9, 2011
[[code]I have this issue where most of the rows in the table do not fill in the data to textbox2 and any edits made in the text box when this happens do not commit to the underlying datasource.When scrolling down and back up the datarepeater different records seem to be shown each time the data on the left is correct in the standard DGV ... it's just the data repeater that doesn't work.
View 1 Replies
Nov 12, 2010
Why images of asp.net toggle button created with checkbox doesn't show inside updatepanel in webusercontrol ?
View 1 Replies
Aug 17, 2010
I am trying to trying to setup an updatepanel to update every X seconds, the problem is I don't want the control to actually refresh unless there is new data. So I currently have a child updatepanel in a parent UpdatePanel, the child updatepanel gets refreshed by a timer. But I can't seem to find a way to trigger the parent panel to update. Again, only when certain conditions(data changed) are met.
Sample Code:
<asp:Timer ID="Timer1" OnTick="Timer1_Tick" runat="server" Interval="10000"></asp:Timer>
<asp:updatepanel id="upParent" runat="server" UpdateMode="Conditional">
[Code].....
View 2 Replies
Feb 24, 2012
I am currently facing an heavy struggle with architecturing my VB.Net app.To simplify, i'm using entries from XAML comboboxs, which all trigger OnChange the same routine which manages which Function(s) to use depending on which combobox triggered.The problem i'm facing is for example i have Function(ByVal A As String, ByVal B As Integer, ByVal C as Double, etc...), and it works if the routine calls explicitly for this function's result. But then if another combobox makes for example the variable B to change, then i have to add another "If sender= Then" check for this combobox and recall expicitly the function above (since B is one of its parameters)..In the end, my routine is loooooong like 24 checks with at least 4x duplicates of same functions..is there a simple way to make a Function autoexecute when one of its parameters change without having to be called explicitly by another routine ? (Like Excel formulas do when one of its references change)
View 12 Replies
Feb 13, 2012
When i click on the link button, it does not show the data from DB... if the part i am updating from DB is outside the tabbed panel then it works fine...
<script type="text/javascript">
var hh;
var left;[code]............
View 1 Replies
Sep 7, 2010
I can easily do this in C#...but I need the equivolent in VB.Net. I need to be able to implement various IAsyncResult properties in VB.Net.
View 1 Replies
Aug 24, 2011
First up i have been working on this for about a year now just in my free time it has come a very long way and so have I. I have built a Tcp ServerClient lib than can run in SocketAsyncEventArgs or IAsyncResult modes, i have been doing much testing of late and i have a bug if i set a thread up to spam the server with a msg every 1 ms the client read logic will drop out, the server will still get the msg's form the client so its still connected just will not read anything on the client side and this will happen in both SAEA mode or IAsync thats why i built both modes to see if i could fix it.
I have msg's showing on the client side in a Richtextbox with color and all that stuff could it be that the Rixhtextbox cant take that many msg's coming in or could it be an problem with my msg handeling but if so then whe is the server side still reading?. I use a few object pools to help with memory usage but i have turned most off to try and work this out, encrytion is off for now too only thing it is doing to a msg is serialize a msg object to a byte bufffer.Ill post some of my code:IAsync Reader its a bit messy because i have just been trying stuff but i dont get any errors(Unless i do something silly with the stream)
[Code]...
View 3 Replies
Aug 4, 2009
How to extract the IP address before using EndAccept to accept the connection request. Its in a Layer3 of the Syn Packet on a TCP request I just dont know what Magic Is needed for Vb.net to extract that Header!
View 11 Replies
Jun 3, 2010
This is starting to drive me nuts. I'm executing a DTS package from a worker thread that is calling an EventListener class to update the background worker ProgressChanged sub. As instructed, the ProgressChanged method is trying to update a progress bar to avoid thread issues but it is not working. I know the EventListener is throwing events because if I put a message box in ProgressChanged I get the package progress %. Why can't it update the progress bar?
[Code]...
View 3 Replies
Mar 4, 2008
I am currently writing a program in vb.net that will read and write to an exel sheet using OleDbConnection. I can read in from the file fine. When I save to the excel sheet and open it, the changes are there, however, when I close the file it asks me if I want to save, which makes me assume that the changes are not saved even thought they show up.
Below is the code I am using:
Dim conn As New System.Data.OleDb.OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=" & excelPath & ";" & _
[Code]....
View 2 Replies
Jan 28, 2012
I have an application where I make calls to multiple SQL Server Stored Procedures,keep the user aware that the program is still running and how long the specific SP has been running so that they can abort it if it's taking too long.
My initial attempt was to wrap up each call to the SPs like this example:
Dim cm As SqlCommand = Nothing
Dim Conn As SqlConnection = Nothing
Dim Tran As SqlTransaction = Nothing
Dim PrevTime As Date = Nothing
[Code]...
View 3 Replies
Aug 18, 2011
Work : publicity.Target = IIF(radioTarget1.Checked, "_blank", "_self").toString Doesn't work : IIF(radioTarget1.Checked, publicity.Target = "_blank", publicity.Target = "_self") Why isn't the second option working?
View 2 Replies
Feb 2, 2012
I am using Visual Studio 2010 and have been slowly getting into threading. My current project has a form with a button that in turn starts two threads. The form itself has two labels on it that are used to display the progress of the computations. Each thread has a delegate defined to change the value of the respective label (as the labels are not defined in the thread, but on the form itself). The threads call subs from a separate class. All of the calculations work flawlessly. My problem is that the labels do not visually update. Through use of message boxes at the end of each loop, I know that the label text property is, indeed, being changed, but it is not actually refreshing and updating on screen.
My delegate code is as follows (I grabbed this code off of another forum where people had the same issue - it seemed to work for them, but not for me):
Private Delegate Sub UpdatePMLabelTextDelegate(ByVal s As String)
Private Sub UpdatePMLabelText(ByVal s As String)
' Are we in the same thread as the label itself?
[Code].....
View 9 Replies
Feb 22, 2011
I have no code specifically for this part of my project just saying this ahead of time.I have not used text files that are inside my project but I want to be able to open the file when I load my form and save it when I close my form.I know how to save manualy and same with opening but that defeats the purpose this has to do as much as possible on its own.All I have are code from a project I made a while back which was a notepad program.[code]however I need this to all happen on its own and it needs to install these text files with the program hence why they are in with the project there are about 30 text files that will need to be with it so if I can get help with one then I can figure the rest out.
View 3 Replies
Jul 10, 2011
I'm trying to enable/disable controls inside a repeater:
<asp:Repeater ID="Repeater1" OnItemCommand="RepeaterItemCommand" runat="server">
<HeaderTemplate>
<table>
<th>
[code]....
View 2 Replies
Oct 13, 2010
I have a page with Ajax Tab controls, within one of the tabs is a webcontrol that as a Telerik RadGrid, with Edit forms pointing to another web control. That edit form also contains Ajax Tabs and on one of those tabs, there is an Ajax modal popup of yet another webcontrol.The initial webcontrol works fine when used on it's own page, but the edit form fails to appear when the control is used within the Ajax Tabs as desired. The script manager is throwing the following error:
Microsoft JScript runtime error: Sys.InvalidOperationException: Could not find UpdatePanel with ID 'xxx'. If it is being updated dynamically then it must be inside another UpdatePanel.
View 3 Replies
Feb 17, 2012
When i put
<asp:FileUpload ID="FileUpload1" runat="server" class="multi" />
<br />
<asp:Button ID="btnUpload" runat="server" Text="Upload All" /> outside the update panel everything works fine,but as soon as i put it back into the update panel...it stops working.
ASPX CODE
[Code]...
View 1 Replies
