I retrieve the html from a cross domain web page using asp.net vb
[code]...
Additionally I want show just a portion of it in a literal control. As an example I want to show just the table with the class "result".How do I process this further in XML and XQuery in VB.NET? How do I declare strRequestedHTML as XML and how do I xquery in it?
Basicly I'm downloading XML files with the Webclient class for processing and caching in a local database. There are three different categories of data, each contains 1 to n numbers of XML files. To retrieve the XML file I ask the server with following parameters in the URL:
[Code]...
I was wondering if this code could be better optimized for multithreading. What it does is open a process and loops through the data, there could be any range of files to open (so I would like to have say 2 or 3 processes at once):
[Code]...
I have written a windows service that is meant to launch a notepad when a specific action happens. The problem i have is that even though the service launches notepad, the actual notepad it self is NOT visible. I know that it has been launced because i can see the process in the task manager. By the way the process is listed as a SYSTEM process rather than a process under my user name (i believe that is because my process is a "LocalSystem" one).
View 4 RepliesI'm receiving a lot of data at the rate of 19200. I'm using read byte to assemble a buffer and process it. When I receive certain data I need to reply to the sender. I noticed that my replies are not fast enough. So I did a test where I unplugged the sender and noticed I was still receiving data! That I found was because the serial port buffer still had data from the sender that I didn't process. Anyhow I'm using Visual Studio 2005, the serial port object. How can I process the data faster. Would something like SerialPort1.ReadExisting or ReadLine work faster?
View 4 RepliesHow do I use for loop in vb.net something like
dim start as integer
Dim customers as New List(Of Customers)
Customers=dataAcess.GetCustomers()[code].....
I want to process some data for each 500 customers..
In my last information seeking I found the answer on a systemic level.
[URL]
Now, I need to find data on the process level and it is documented in a far sparser manner than I am used to seeing. I dont know if the answer is in psapi.dll or kernel32.dll is. I don't know what approach to take since there is little information.
I am currently creating a Windows App for a handheld device (WM 6.0, CF 2.0, sqlce 3.5) that pulls data from the server only when connected to a dock (all the significant data is maintained/altered on the handheld til it comes back and is docked for a sync with server).The data is similiar something UPS would do in that it manages pickups and dropoffs of items from a location to a location and records the time these "transactions" occurInitially, the handheld has a couple source tables (pickups and dropoffs) and some validation tables. During a given pickup or dropoff, I am trying to figure out the best way to move the data along this multistep process
View 2 RepliesI need to pass some data to some procedure called with a parralel.invoke, how can I pass data to the procedure?
I need something like:
Sub ProcessData()
For Each myobject In ListOfObject
Parallel.Invoke(AddressOf LoadOneCPU, myobject )
[Code].....
I found VB to be the easiest and best tool to process ascii data. I have a bunch of them (about 15), each is constructed differently, and I will receive monthly updates. the data is all the US flight navigation systems, like VORs, airports...etc. Some of the files have comments and explanations on top and bottom only, and the rest is heading and data at specific columns. Others are a little trickier, like the data for Jetways, its not continuous data, but it breaks for each jetway to identify it first, then plot the data in rows. What am ultimately trying to do is create a tabular version of some sort of this data to be used in my GIS database. Some of the fields needs to be combined ofcourse, like the latitude and longitude data is given in separate columns, but they need to be combined. I have pasted below a small sample of two different data files. [code]
View 5 RepliesI'm looking for a way to process the text entered into a textbox, before the the focus is lost from the control. Or a way to pass a reference to the control to a function/sub when the control has lost focus. In Access I would be able to use the AfterUpdate event. I have tried the following events, but have not figured out how to get what I want from either of these events:
- TextChanged (tried to capture the Tab key, didn't work)
- Validating (when fired for Text1, the ActiveControl name is Text2 which is the next TextBox control)
I am trying to implement SMPP protocol in vb. I am sucessfull in send and receiving packets using sockets. Now I would like to decentralize the functions of my program. I want to implement two programs one for sending and another for receiving using a single socket. I want to receive data through the same socket that was created in another process(i.e., the first program).
View 1 RepliesIs there a way to optimize the process of reading data from an harddisk to reduce the time required to get the data?
View 1 Replies[Code]...
I'm doing an application where I open a specific process. And after opening that process I need to send data to him like username and password.
[Code]...
i'm having trouble opening a text file to process and order the data in it. When i try to read the first line of characters an error message occurs saying: 'Variable words1 is used before it has been assigned a value.' I dont understand what i am doing wrong when opening the file. Also, I am sorry if this is a rather basic question.
[Code]...
Imports
System.IO
Imports
System.Windows.Forms
Imports
[CODE]...
I don't understand why nothing is being returned from the SQL)
I am iterating processes using the Process class GetProcesses method. I would like to display information formatted similarly to the way the TaskManager displays it. Where to I get the CPU and Mem Usage data that the TaskManager displays?
View 2 RepliesMoved from Microsoft Developer Network
> Forums Home >
Development Forums >
Windows Debugging
[Code].....
MS has a patch for the OnListChanged event handler issue, even though it seems we have to pay to have access to it. This fix specifically addresses an error message when you press ESC to cancel adding a new row in .NET 2.0: [URL]
FIX: Error message when you try to press ESC to cancel adding a new row to a DataGridView control in the .NET Framework 2.0: "An unhandled exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll"
I want my vb.net dll to get the data sent from c++ project(exe).Can any body help on in what form this void pointer can be sent via pipe. The void pointer corresponds to enums or structures. I have to get this structures/enums on the vb.net dll end. I have mentioned about using pipe. My question is as what type the pointed to data can be send over the pipe so that I can easily handle the received data at the vb.net dll end.
View 1 Repliesi am trying to write a little program that checks for a process and kills is.here is the
Dim p As Process = Process.GetProcessesByName("Cheat Engine")(0)
p.CloseMainWindow()[code]...
My problem is it�s woking ,yes if the programm ,,Cheat Engine" is running the process is getting killed.But if the program is not running my program crashes.
I'm executing a remote process using WMI and would like to redirect the StandardOutput of that process back to my program. I have found these code examples:
[Code]...
I am getting an error with this code.
The process cannot access the file 'C:UsersdavidDesktopTest Folderdavid 2.xml' because it is being used by another process.
how do i end the prosess after I create the file? Or am I creating it in the wrong manner.The underlined line is where the error ocures.
Public Sub AddDTData(ByVal value1 As String, ByVal value2 As String, ByVal filename As String)
dtUser.Rows.Add(value1, value2, Now.Date)
If My.Computer.FileSystem.FileExists(filename) Then
[code]....
How to get full path of current directory of process from where process starts Like if i use my software to start somefile then I want my software to know where she started it from ( files path) What I mean is the file I opend using my softwares location.
View 2 RepliesMy app starts an On-Screen Keyboard process like this:
Dim PID as System.Diagnostics.Process
:
PID = Process.Start("C:WindowsSystem32osk.exe")
:
[CODE]...
It seems to work 90% of the time. However, sometimes the PID.Kill() fails because it says the process already exited. At this point the OSK is always still there on screen. Yes, I know my code should be testing to see if the process is still running before trying to kill it, but given that the OSK is still on screen..
I have a program that starts another program after setting the regkeys basically the program continually syncs the calandar of outlook and another application.I set the regkeys than launch the c:sync.exe app. I have tried a simple process.start and launching the process as a thread and they both do the same thing: The other process starts and works as it should but my main program goes "White screen" or "not responding" until the process.start has exited.
I want the process.start to run in the background so if users click in my main app it responds and truly that they can access the context menu of my main app from the taskbar while the process.start is running.
i want a code that if a process that i picked is no match in a process list that process that i picked will start
View 4 RepliesTrying to create a button that when clicked will check to see if a certain process image is running and if that process is running give the process focus. If the process is not running then start the application.
View 9 RepliesI am working on a small VB application that listens for commands sent from an Android app.
One of the functions is to extract an archive. I am familiar with how to listen for the unrar process to finish, so I can display a progressdialog on the phone while the extraction is happening, and clear it as soon as it's done.
BUT ... if there is an error/alert from WinRAR, WaitForExit() never gets called because WinRAR is still sitting there open until I click "OK" on the MsgBox.
For Example ... if you try to extract a file that is not actually an archive... an alert will pop up saying "No Archives Found", and basically everything is halted on the VB app and the Android app, and the Android app just sits on a progressdialog saying "extracting..." until you manually hit "OK" on the computer.
As you can imagine, this is a problem if the whole point of your app is to NOT have to go over to the computer.
So... I am wondering if there is something similar to WaitForExit() that will wait for an error and allow me to close out the alert and let the process end.
Here's my Sub for the UnRar command:
Private Sub UnRar(ByVal WorkingDirectory As String, ByVal filepath As String)
Dim objRegKey As RegistryKey
objRegKey = Registry.ClassesRoot.OpenSubKey("WinRARShellOpenCommand")
[Code]......
I have an issue using Process.MainWindowTitle,Process.MainWindowHandle on some older VB6 applications. After Process.Start I use Process.MainWindowTitle to display in a listbox. The MainWindowTitle returned is not the Window Title but in fact the Project name of the VB6 exe.? I also store the MainWindowHandle to use the ShowWindow and SetForeGroundWindow API's. It would appear that the ShowWindow API does not work, but the SetForegroundWindow does. ie: if the VB6 app is minimized, showwindow does not restore, if it is NOT minimized setforewgroundwindow sets it to the foreground. The exact same code does work correctly for any other .net exe or notepad, only on these vb6 programs I am having a problem.
View 9 RepliesI try to open a text file and write in some text, when i run the program it says the following error:The process cannot access the file 'D:VB projectsCategory_Characteristics.txt' because it is being used by another process.
THe code is as follows and the error hits in line :
Dim objWriter As New System.IO.StreamWriter(FILE_NAME)
-----------------------------------------
Dim FILE_NAME As String = "D:VB projectsCategory_Characteristics.txt"
[code]....
