I need to dynamically create textbox. This is my code, but with this I create only one textbox:
Public Sub CreateTextBox()
Dim I As Integer
Dim niz As Array
[Code]....
So how i can dynamically create textbox?
how to create textbox dynamically but the problem now is that I want it below my previous created textbox
Dim textbox1 As New TextBox
textbox1.Name = "Textbox1"
textbox1.Bounds = New Rectangle(e.Location, New Size(100, 100))
Me.Controls.Add(textbox1)
I know how to create textbox dynamically but the problem now is that I want it below my previous created textbox[code]...
View 2 RepliesHow to dynamically create text box with format in run time? I wanted to create a text box like in Microsoft Office whereby user click on the insert text box button and then click again on the specific area they want the text box position to be...
I found several coding for this but the result I get is only the normal text box and not like rich text box... Finally, is it possible to create picture box dynamically???
I am adding a grid of buttons to a form at run-time, and all of then use the same Handler.My question is : Is there any way I canadd the TextBox at run-time ?I know how to but without it on the form, the IDE isn't very happy about the "MyClick" Sub - TextBox1 is not declared......
' some logic here to make nice rows and Columns of buttons
' with different .Text and .Name
Me.Controls.Add(btn)
[code]....
How to add textbox dynamically(as per some conditions) to WPF usercontrol. .?
WPF usercontrol will be used in Winforms application...!
I would like to create a folder dynamically in vb.net.I know System.IO.Directory.CreateDirectory("c:NewFolder") would create folder in the directory but I want folder to be created in the application and visible on my web page.its like when I say create album ..I should be able to create a folder with album name on it.
View 3 RepliesI want to create a form dynamically.I have a section on the form that has 3 combobox and 2 buttons. What I want is when the user clicks on the '+' button it add another 3 combobox and 2 buttons below the first, and so on and so on. Also when the user clicks the '-' button I want to remove the row of 3 combobox etc.
View 2 RepliesI want to create labels dynamiclly (at run time) when user clicks one its click events will excute I want like this : for i as integer=1 to 10 step 1
'' here label creation
end for
[code].....
I have created a function that uses the Mailto: vb control, It Works like this: SendEmail("Address@address.com, "subject", "Mail body.")The email address subject are all created dynamicly,and my function works fine when testing.
however, I want to dynamicly create the button and dont know how to make it call a function with params on click, Here is what im trying: Private Sub Form2_load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]...
I have a form with a textbox to enter a number and a button called "Create". When a user enters a number and clicks create the form gets populated with the number of buttons entered in the textbox and the title of the buttons are labeled by consecutive numbers. For example if you enter 5 the form will populate with 5 buttons labeled button1, button2, ...button5. When you click on these newly created buttons a messagebox will popup stating the buttons name. Basically I need to know how to create events and populate them with code I guess dynamically.
View 1 RepliesI have a form that I am adding a set of buttons to. I am adding an event to those buttons. I need this event to function slightly to determine what button was pressed.I need the button to simply set a string variable equal to the clicked buttons text so I can determine what button was pressed.How can this be accomplished?
''
'Adding the buttons
''
For Each dr In dtMenus
Dim strMenuName As String
[code]....
I want to monitor more than 10 folders on different machines by using SysTemFileWatcher. I create a class called Watcher for doing monitoring. So, for each folder I have to call that class once with a new thread. I want to name each thread with its own name like: T1, T2, T3 ... for easier controlling them. It is not nice if I declare each thread like:
Dim T1 as Thread =new Thread(Address of Watcher.StartWatcher)
Dim T2 as Thread =new Thread(Address of Watcher.StartWatcher)
...
Dim T18 as Thread =new Thread(Address of Watcher.StartWatcher)
How can I declare thread names dynamically with the names just like that. I have tried to use Thread array() but it doesn't work.
Is it possible to dynaically create table name in MS Access:
Below is my CODE:
strSQL = "CREATE TABLE" + Me.Text + "( ID Counter," & _
"Name TEXT(50) NOT NULL," & _
"PRIMARY KEY(ID) )"
But, I am getting a run time error that syntax is wrong.
[code] .i am using oracle as database. i want to create table at run time that will remains in database to store info permanatly later.
View 1 RepliesIs it possible to dynamically create properties, something like this method in a class:
public sub addproperty(byval property_name as String)
i write the following code to create code
Dim i, x, y As Integer
x = 30
y = 25
i = 0
[code]....
i want to retrive the textvalue of checkbox whose checked property is true and respective textbox at a buttonclick event. Problem is in finding the controls and their textvalue. any one can help?Thanks in Advance.dt1 is datatable .For window form application.
I have a strange behavior with a dynamically created TextBox-Control. The control is created in the handler of the Load-event of a dialog-form like this:
[Code]...
Now the situation is, that in most cases it works fine. But a few of my customers report that the TextBox not appears on their dialog - it's not there! That's all, nothing more to say.hints or reports about known pitfalls with dynamically created controls which could explain this (sometimes) strange behavior and how I could fix it (I have to create this control dynamically due to some reasons).
BTW: The program is built with Visual Basic 2005. And the customers with trouble are spread about the OS's (XP, Vista, 7).
A user can select a few chec box options, then clicks OK.A new tabpage with a textbox and two buttons is created and added to my form, the textbox can be seen as a sort of 'receipt', and one button is a close button, which deletes that tab, the other button is an edit button.When the user selects edit, I would like the selection page to open up, checking, (through a couple of If conditions, whether a text is contained in the text box), then if a certain text is found in the box, a corresponding checkbox on my form is checked.
So basically, my problem is trying to check the text from a textbox which doesnt exist until after my form is loaded... I need someway to reference this new text box, not forgetting there may be many tabs at one stage.I tried a method in which each new texbox was added to a list, then when the edit button was clicked, it checked the tab index and checked the corresponding textbox, but this would only work for the first tab/textbox and caused issues with the close button, perhaps when the edit button is pressed, VB checks my selected tab, and somehow finds the textbox which is on that tab.
Private Sub TextBox1_() Handles TextBox1.MouseDoubleClick
TextBox1.Height += 15
End Sub
Private Sub TextBox1_TextChanged() Handles TextBox1.MouseWheel
TextBox1.Height -= 15
This code seems to work ok for dynamically controlling a textbox height. Would like to know if there is a way to have the textbox height auto size to accommodate each entry. Autosize does not appear to be a property of textbox.
I've a dropdownlist to start.
When the index change event of this first dropdownlist fires, I need a second dropdownlist (populated according the value of the first ddl).
It's ok to generate the second ddl but what about a third? I actually need it to be dynamically created (it should be able to create an infinite number of dropdownlist)
How can get the index change event of the 2nd dropdownlist, 3rd, 4th and so on?
How dan I dynamically create some public properties on a custom webcontrol.
For example, web control has 5 TextBox controls. I need a public property for each TextBox control to be able to set a specific property of the TextBox control.
I want to be able to loop the controls in the webcontrol and create a public property for each TextBox control.
i am trying to figure out how to go about creating dynamic checkboxes on my form when i do not know axacctly how many boxes i will need.The problem is that i do not know how to DIM more than one object. This is my code for creating one checkbox
Dim heckBox As New CheckBox()
Form1.Controls.Add(checkBox)
checkBox.Location = New Point(10, 10)
[code]....
Is there a way to write an application in VB.NET that will create a Compact 3.5 database on my desktop and then fill it with data from a SQL 2000 database?
View 1 RepliesHow do you create an access database dynamically?
View 2 RepliesA while back I asked a question on how to create EXEs at dynamically at runtime. This time, I wanted to know how to add code to your program dynamically at runtime too. Like if I had a textbox on a form, and I typed whatever code into it, then it would add the code to a subroutine and it would be executed. How can this be done?
View 4 RepliesIn my application developing using VB .Net, i want a create HTML elements dynamically. I want to create as given below ,
<div class="contact">
<dl class="user">
<dt>
[code]....
The above code works fine. Now how do i append a img element. Also how do i mention the class ?
I want to create labels in my page dynamicly, for example the user will choose in a textbox the number of labels, and I will display the number of this label with .text = "XYZ".
View 3 RepliesI need to create a pdf file dynamically in vb.net. It needs to contain several images and lines of text. I am using VS 2003, so whatever solution I use will need to be compatible with the .net 1.1 framework. The current method I am using is wpcubed, but this requires that all images be converted to bmp format before adding them to the pdf, which can be extremely slow when dealing with a large number of images.
I am aware that there are an awful lot of other 3rd party products that claim to do this, and I have had a search through them. But without registering, downloading, installing and writing code to use each of them in turn, it is very difficult to differentiate between them. So far I have looked into evo pdf and pdfsharp,tallcomponents, [URL] but none seem to work with .net 1.1. (Although they don't make this abundantly clear.)
I have a table with fields player1Name,player2Name..etc. How does one create the field names dynamically. I tried this..doesn't work obviously.[code]....
View 6 Replies