C# :: Reliable Way To Cancel ItemCheck Event On CheckedListBox?

May 4, 2012

Does anyone know of a reliable way to cancel the ItemCheck event on a CheckedListBox? I am in a situation where the ItemCheck event should basically discard changes on a form, however, if the person decides to cancel the discard I would like the ItemCheck event not to fire so as not to change anything.

View 2 Replies


ADVERTISEMENT

Forms :: CheckedListBox's ItemCheck Event?

May 12, 2008

I need to produce a list of checked entries from a CheckedListBox whenever an item changes, but that ItemCheck event gets thrown before the item's status is actually changed so the checked items list is incorrect.I found a forum post telling to use the SelectedIndexChanged event instead, but that won't work if the user checks the item using the space bar.My two alternatives are to :1. Use the ItemCheckEventArgs to figure out what item changed and how. Since the code that gets the list of checked items is a few methods down on the calls hierachy, I would need to pass the event args around (or more likely an homemade representation of its data for consistency).

2. Use a class member boolean to see if I'm in the ItemCheck event handler and set the item's checked state to its correct value before calling the method that does the processing. The boolean is used to avoid an infinite call of the event handler, it would just return without any processing in the case the event handler is in the call stack itself.

View 8 Replies

WinForm CheckListBox With ItemCheck Event?

Sep 18, 2009

When the checked state of a check box change, I would like to know what the new value is.his is what I am doing:Friend WithEvents clstTask As System.Windows.Forms.CheckedListBox

Private Sub clstTask_ItemCheck(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ItemCheckEventArgs) Handles clstTask.ItemCheck
Dim SelectedCheckState As CheckState = clstTask.GetItemCheckState(clstTask.SelectedIndex)

[code].....

View 2 Replies

Custom DataGridViewColumn - Error: 'Public Event ItemCheck(sender As Object, E As System.Windows.Forms.ItemCheckEventArgs)'

Jan 19, 2012

following code from c# to visual basic, and I'm coming up with the following error: 'Public Event ItemCheck(sender As Object, e As System.Windows.Forms.ItemCheckEventArgs)' as an event, and cannot be called directly. Use a 'RaiseEvent' statement to raise an event.

[Code]...

View 8 Replies

Cancel Save Event - E.cancel

Sep 21, 2011

i want to do this: when user click save button, the form must be check first..

if user did not insert the required data, user are not allow to save form..

the code:

Private Sub AssetMasterBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AssetMasterBindingNavigatorSaveItem.Click

[Code].....

View 5 Replies

ApplicationExit Event And Cancel Event In App With No Forms?

Jan 20, 2010

ApplicationExit Event and Cancel event in app with no forms?

View 8 Replies

ComboBox Cancel SelectedIndexChanged Event?

May 21, 2009

I have a ComboBox that contain ProductIDs and a DataGridView that lists Categories which a product can be a member of. My DataGridView list ALL categories, however, it has a checkbox column that get checked when the ProductID is a member of that Category, otherwise it is unchecked. A user may also check or uncheck a category checkbox then save.

The problem is, if a user forgot to save before changing the ComboBox, then his changes on the previous ProductID is gone How can I give the user a chance to either save or ignore the changes done on the previous ProductID (before selecting a new ProductID)?I searched the internet for an answer and I found the following code but it is in C# and I am not sure if it solves the problem or not!

[Code]...

View 3 Replies

Cancel A Form Loading In Its Load Event?

Oct 18, 2010

what's the best way to stop a form from displaying in its Load event.I initialise a form using the following code:

Dim MyForm as new MyCustomForm

In the Load event of MyCustomForm, I ask the user to select a folder and use that to populate a listbox on the form.folder.If the user presses Cancel instead of selecting a folder, I don't want to display the form. Right now, I just call Me.Close in the Load event, but that still causes the form to briefly appear and disappear in the background. Also do I need to call Me.Dispose?

View 3 Replies

Regex - Cancel Handler On A KeyUP Event?

May 11, 2012

There a way to use e.Cancel () on a keyup event?

I'm trying to validate a textbox with a Regex and I need to cancel the event if it no meets the Regex expression, or delete the key pressed to meet so that the expression

For Example:

Dim rex As Regex = New Regex("^[0-9]{0,9}(.[0-9]{0,2})?$")
Private Sub prices_KeyUp(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles Textbox1.KeyUp,

[Code].....

View 1 Replies

Button - .NET: MessageBox With YesNoCancel - No & Cancel Triggers Same Event?

Feb 13, 2010

I have a message box with YesNoCancel button..

Pressing Yes will do some action and close the app - works fine,
Pressing No will do nothing and close the app - (see below),
Pressing Cancel will Do nothing and keep the app open - (see below).

I'm using DialogResult.No for No button and DialogResult.Cancel for cancel button. But pressing either of them triggers DialogResult.Cancel event. Whats the problem?

View 1 Replies

Cancel The Input On Textchange Event Depending On A Condition?

Jun 18, 2009

i want to cancel the input on textchange event depending on a condition, how? for example, as user type in textbox, it fires textchange event, in that i want to do some condition testing, if value is true then accept new character or cancel the new input.

View 5 Replies

Control Cancel Event Of Cyrstal Report Print?

Jun 21, 2010

I have written a code to print the crystal report instead of using print button in the crystal report viewer control.(I have done this in order to keep record of printed pages.) So, now there is a print button in my form, which upon clicked will show the printer select dialog box to print the crystal report pages. Now I need to track the event when user presses the Cancel button shown in the print dialog box?

View 1 Replies

Radio Button Checked Change Event Cancel

Mar 9, 2011

I have two radio buttons. I fhte user swtich between radio buttons, I need to popup warning message and if user confirm, then only I need to swtich to next radio button. Otherwise I shouldnt switch. I am using CheckedChanged event. As by the time I popup warning message, control is already switched. I tried adding and removing event handler.

[Code]...

View 3 Replies

VS 2005 - How To Cancel Arrow Buttons Event (TabControl)

May 23, 2009

When I click the left or right arrow buttons on the keyboard my tabcontrol tabpage changes from one tab to another. How can I cancel the arrow buttons from changing the tab pages? In other words how can I disable the arrow buttons when the tabpage has focus? Is it possible to do this without extending the base class?

View 5 Replies

VS2008: Unable To Cancel Tabpanel Validating Event?

Jul 21, 2009

Winforms, VS2008 I have a mainform that has 2 usercontrols: UC1 and UC2.UC1 has a treeview with treenodes. UC2 has tabControl with few tabPages. Selecting different nodes displays different details view in the TabControl's TabPages. What I need is canceling the event when the user has selected a node in the treeview, then he selects another node (i want to be able to cancel this last event:selecting another node, all depending on a certain logic)I mean: When the user is working on a tabpage in the tabControl, when he clicks on a different node in treeview (different from the currently selected node), before displaying the new node's details in the TabControl, I perform some logic, then depending on that logic, I set

e.cancel = true in the UC2 Validating event handler. (Rememebr UC2 includes the TabControl and the user, supposedly, has the focus on a control somewhere in TabControl)

But mysteriously, the event gets never canceled and the user still moves to the next node, displaying its details in the TabControl, although I set e.cancel = true.

View 4 Replies

Add Itemcheck In Listview?

Jun 2, 2011

If the itemcheck is check then all the checks will be add separately to cash.[code]...

View 3 Replies

Cancel Validating In A DataGridView When A User Clicks The Cancel Button?

May 18, 2006

I validate a DataGridView with the CellValidating-eventhandler.That works fine. However, I want to avoid validating when the user presses the Cancel button. In the sequence validation occurs before the event CancelButton.Clicked.

View 1 Replies

Cancel Fires But Other Code Also Fires When A Click Event Occurs?

Mar 9, 2012

A form has many buttons. One of those buttons contains code to update the TableAdapterManager. One of the many TextBox controls has code in a Validating event handler. There is code to make sure a US phone number is formatted properly.If the user tabs out of the TextBox the Validating code works perfectly and show a message to the user if the phone number is not properly formatted and the focus is place in the offending TextBox.If the user clicks on a button that has code to update the TableAdapterManager the Validating code fires but instead of focus remaining on the offending TextBox, the code in the button Click handler also fires.

I would like to stop the button code from firing.Here is the code for the Validating event of the TextBox:

Private Sub TextBoxPrimaryPhone_Validating(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles TextBoxPrimaryPhone.Validating
' Make sure the phone is formatted correctly.

[code]....

What additional coding to I need to include so focus remains on the TextBox?

View 1 Replies

Cancel The Delete Activity From Within The Delete Click Event?

Feb 5, 2006

I have a BindingNavigator and combobox tied to the same BindingSource. I want to allow the user to confirm a delete after hitting the delete button of the navigator. It appears that the row gets marked for deletion after my BindingNavigatorDeleteItem_Click event handler is processed. Is there no way to cancel the delete activity from within the delete click event? If not, then it becomes necessary to store a delete flag and catch another event to RejectChanges.

View 7 Replies

How Reliable Is Stopwatch Start Method

Aug 23, 2009

I use it as a timer(obviously) to get the lapsed time of an upload. Something that took 2 secs it said 12. [code] Everything looks right. and it seemed to be working. Just in no way did it take 8 or 12 secs to send

View 4 Replies

Reliable Alternative To Timer In .NET Framework?

Feb 16, 2011

Is there relialbe alternative to Timer class in .Net?We are having issues with System.Timers.Timer and System.Threading.Timer, e.g., they start immidietly, or sometimes fire out after long period of inactivity (after 49 days).I've seen that there seems to be a lot of issues with them like here: url...We can not use Forms timer.We are thinking to pause the thread for certain period of time instead of the timer...

View 4 Replies

VS 2008 Reliable Way To Get #records In A File?

Jun 29, 2010

I am reading a file and loading the records read to a database. At the end of this process there needs to be a check that the counts match. This code was already written and the comment doesn't give me great confidence in it: ' Description: Get the number of lines in the record file. Thisshould give a good indicator of the number of recordsIt should or it will, using this code?:

Dim i As Integer = -1
Dim line As String = ""
Dim sr1 As StreamReader

[code]....

Then i is returned as the count of records in the file. Is this the best way and is it reliable? Records in the file are delimited with a newline

View 8 Replies

What Is Most Reliable Path To Export Data

Dec 2, 2010

What is the most reliable path to export data? I have a Access db used by many. I have a button that export the data to the desktop. It works great for most but a few people get a error that it is open exclusively or they need permissions to view.How can I fix this error? [code]MsgBox "This data has been sent to your Desktop", vbExclamation, "Request Complete"

View 7 Replies

.net - A Reliable Pattern For Command-line Arguments?

Jul 13, 2011

I see so many programs take command-line arguments with flags, for example gcc hello.c -o hello. Of course, I can implement that in my application:

Dim args() As String = Environment.GetCommandLineArgs()
Dim oi As Integer = Array.IndexOf("-o", args)
If oi > -1 AndAlso oi < args.Length Then
CompileTo(args(oi + 1)) 'Or whatever
Else
CompileTo("out.exe") 'Or whatever
End If

But it's ugly and annoying to use, prone to errors, and inefficient. What's the better way that I keep overlooking?

View 3 Replies

Deployment :: Reliable Way Of Knowing Number Of Downloads

Jan 20, 2012

I eyed VB.NET 2010 Express and created the damn app. It's up and running and it does what it's supposed to do (in v1). Now I'd like to distribute it for free while:

(1). Have a reliable way of knowing (and everybody can check this out) the number of downloads.

(2). The app cannot be passed from one user to another, but has to be downloaded from the reputable biz (there can be more than one biz) that accurately provides the number of downloads.

(3). I can have total control over the app (once it's downloaded by the users), that is if I want to inform the users of updates or whatever, or if I want to add some ad windows to the form I can do it whenever I want and how I please.

How do I do (1) to (3)? What am I supposed to read to do (3)? ADO.NET and ASP.NET? Any shortcut? What's the easiest way of doing it? I'm not sure I'm looking for a career in programming, for now I just want to take this app off my shoulders and go back to daydreaming.

View 4 Replies

How Reliable Is LastWriteTimeUtc To Synchronize 2 Folder On 2 Different Computers

Apr 28, 2011

how reliable is LastWriteTimeUtc to synchronize 2 folder on 2 different computers? what problems could rise using LastWriteTimeUtc.is there a better way to see if a generic file is of a newwer version?

View 7 Replies

When Calling Unmanaged Code From .NET, Is It More Reliable To Use DECLARE LIB Or DllImportAttribute

Aug 20, 2010

We have a VB.NET program that needs to periodically call a function in an external, unmanaged DLL to communicate with our legacy application. We are having a problem with the application (seemingly) randomly not being able to find the DLL with the unmanaged code. Currently we use DECLARE FUNCTION blah LIB for the unmanaged code. Would it be better/more reliable to use DllImportAttribute instead? Or am I missing something else?

View 1 Replies

VS 2010 E.cancel "cancel Is Not A Member Of "System.EventArgs" Error

Mar 13, 2011

Im coding an interest rate calculator and I need a close clause for the textbox and the combo box using e.cancel and im getting a "cancel is not a member of "System.EventArgs" error

View 13 Replies

.net - Populating One Checkedlistbox With Another (checkedlistbox)?

Mar 24, 2010

I am having difficulties populating a checkedlistbox (CLB) based on the selection(s) made in another. It should also be noted that I have a "Select All" checkbox at the top that checks/unchecks all of the items in the first CLB. Here's the code:

[Code]...

The first CLB is populated with an arraylist of values on the button click event. Based on whatever is checked in the first CLB, corresponding values from an arraylist of structures should fill the second CLB.The following code partially works until the "Select All" checkbox is clicked at which point if other values have been selected before "Select All" is checked, the second CLB is filled with the correct number of corresponding values BUT only those of the most recently selected item of the first CLB instead of all of corresponding values of all of the items that were not already selected.

View 1 Replies

Control Array - Add New Event - Click Event Code And Calling It A Doubleclick Event

Jul 31, 2010

I've read thru Iceplug's tutorial on control arrays and got it working. I tried to add a new event by basically copying his click event code and calling it a doubleclick event. I used the proper addhandler and assigned the correct name to my sub. I have the click event changing the background color to blue and the doubleclick event changing the background color to green. The background color does not change to green. Why?

Heres the tutorial with my new code encased in asterisks ...

Code:

Imports System
Imports System.Windows.Forms

Public Class form1

[CODE]...

View 7 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved