I have a form that I load to that form a control ("user control") that i build.
In this control there is a button. I want that every time the user press the button it will call the function that located in the form(with parameters).
I dont know how to do it. What I did so far is when the form loads, it also load to it GUI the control that I build.
This is my first month for migrating from vb6 to vb.net.
i've simple code here :
this main form .:
Public Class Form1
Private Sub LinkLabel1_LinkClicked(ByVal sender As System.Object, ByVal e As System.Windows.Forms.LinkLabelLinkClickedEventArgs) Handles LinkLabel1.LinkClicked
[Code]....
ive two custom controls, which are used to draw and edit etc...(like paint but customized....) i want to save their images with a single click....So im using the Getimageofcontrol function to do it....its code is below:::
Public Function GetImageOfControl(ByVal c As Control) As Image
Dim rc As New Rectangle(c.PointToScreen(c.Location), c.Size)
Dim i As Image = New Bitmap(rc.Width, rc.Height)[code].....
and the code to call this function for saving the images is simply.. ...
GetImageOfControl(pboxd).Save("c:78.jpg")
GetImageOfControl2(pboxf).Save("c:lp.jpg")
but the problem is that both the images have the same content....
I am trying to convert a DLL function call which has the Callback function routine called within the DLL function call.The DLL function call signature is like this:
typedef void *HANDLE;
typedef HANDLE HACQDESC;
DECLARE_HANDLE (HWND);
[code]....
how to convert this DLL call to VB.NET and also how to create the callback function and send it as parameter to this function
call.
The main function receives data, uses additional functions to calculates the result and gives it back. But at one point, the function needs data from the SQL Server. I wrote a second UDF, made it visible and deployed it to the SQL Server. I see now two functions under > programmability > functions > scalar value functions:
1. The main function (IsCalcDay) and
2. The function with the data access (IsHoliday)
If I call directly the second function from VST in the debug mode, it works fine, bur if I call it via the main function, the code stops if the connection will be opened. The error is "Data access in this context is not permitted. The context is a function or method that is not marked with DataAccessKind.Read SystemDataAccessKind.Read or a callback to retrieve data from the FillRow method of a table-valued function or a UDT validation method." (translatet from German, probably slightly differnt in English)
VST (2010 prof) and the SQL Server (2008 R2) are running in my virtual W7 maschine.
Here is the code of the second function:
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
[Code]....
Why can I open the connection if I call the function directly, but it fails if the function is called from another function?
In Access, it is easy to call a user defined function in a sql statment, exampleSub AAdim mDb as[code]...
View 5 RepliesHow can i call sqlserver 2008 user define function in vb.net?
View 1 RepliesI am doing a alarm system project which allows a user to select a particular alarm and test the sound. It will also enable the user to save the alarm as the prefered type. So that the next time the alarm rings, it will be that tone which the user has selected.i have already done the select alarm button, play and stop button, but i am having trouble with the save button. [code]
View 1 RepliesI have a webpage that contains an ActiveX object, called object1, and a javascript function, called alertMe(input). I wish that if user clicks on different location on object1, it will call the javascript function. Is it possible to do this? If it's possible, how should I write the calling in the ActiveX object?
View 1 Repliescan i call vc++ user control in vb.net
View 3 RepliesI'm writing a VB.NET app that will control a commercial backup product. One of the things I need to do is loop through all existing jobs and look at the source drive. I am able to do this in VBScript very simply like this:
[Code]...
However nothing I try in VB.NET works. I'm pretty sure it has to do with the fact that the com functions are returning variant data types and arrays (specifically GetVolumes). I have tried using string arrays, object arrays, and even wrapping the return value in a VariantWrapper and I always get errors such as "not implemented" or "the parameter is incorrect." If anyone is bored and wants to write some code I'll gladly give it a shot and report back.
[Code]....
I have created two user controls (lets say A and B) and calling then on default.aspx. Both user controls have button named as clear and its event method "btn_clear_click (sender,event)". Actually I like to do something like this: if I click clear button of user control A then it would also do the same tasks defined in user control B's bth_clear_click method. Means, is there any why to call button event of one user control in another user control.
View 2 RepliesI have several user controls which inherit from the following abstract class[code]....
View 1 RepliesPossible Duplicate: User control javascript I defined a JavaScript function inside a user control.If I have multiple instances of the user control on my .aspx page, how do I prevent multiple function definitions in the resulting HTML code?
View 2 RepliesI'm trying to undersatnd the syntax of calling a funciton and it seem confusing when I'm using a web service in ASP.net. Maybe this question should be in an ASP forum, but it is a VB question. This simple web service allows you to type in your name and it response with an alert box with you name.
My question is, How can you call a function with 2 arguments when the function is only defined for one. I understand that the second argument is actually a method that handling the respons, but how can you interchange function arguments for methods and how do you know that there are methods for
Here's my call:
<script type="text/javascript">
function HelloWorld()
{
var yourName = $get('txtYourName').value;
[CODE]...
I want to create an ExpressionTree where a Func(of Vector, Vector, Vector, Vector, Double, Double, Vektor) should be called. So I use
Expression.Call(Forces(0).Function.Method, {Vec1, Vec2, Vec3, Vec4, Double1, Double2})(Vec1-4, Double1-2 are declared as ParameterExpression and Forces(0).Function as Func(of Vector, Vector, Vector, Vector, Double, Double, Vector). But I get an AgrumentException, because Forces(0).Function.Method has seven Arguments. (System.Runtime.CompilerServices.Closure as seventh argument at Index 0).
How can I call a function from inside another function and suspend the calling function until the called function is finished? I hope I can get some replies because I don't know how to ask the question and make sense:).
Anyway what I am trying to do in steps:
1. The user clicks button1 which triggers the click event.
2. From the click event I call a function
3. I then pop-up a form, that has instructions for the user to read.
4. After the user has read the form he will click the "Done" button and return to the calling function.
The problem is the the calling function continues to execute. I want to stop execution of the calling function until the users clicks the "Done" button on the instruction pop=up. I know I can use a msgbox but the instructions can be lengthly and does not look good in a msgbox.
I have tried the Call method with return in the "Done" button click but I can make that work. I also tried a goto statement but I can get that to work either. In the call statement I said call frmInstruction.show() and it got there but as I said the calling function continued to execute.
I have a function where I am performing a lot number of database operations inside a Sub. The operation when called directly like:ExecProcess()
takes about 11 seconds to run.However, if I create a Delegate, and call the sub using BeginInvoke(), the very same process takes over 40 seconds to execute.Here's the threaded code:
Protected del As ProcessDelegate
Protected Delegate Sub ProcessDelegate()
del = New ProcessDelegate(AddressOf SELocal.ExecJob)
Dim cb As New AsyncCallback(AddressOf Me.ExecJobComplete)
del.BeginInvoke(cb, del)
Anyone know what may cause a function to take longer inside a new thread, rather than calling directly?
Some programs implement command parameters, Like my favourite computer game - Crysis - has them and windows media player has them.But how could i implement them in VB.NET..I want to have a component of my program built as a seperate exe - so it can be an Optional component.But of course the seperate exe, on load, needs data passing to it.So i need something like Process.start("Componentname.exe", "/StartDL <Suchandsuchastring>)/StartDL will need to call a function, and the string that it uses will be given to the function to initiate a download?
View 9 RepliesI am attempting to inherit an ASP.NET RegularExpressionValidator and add some functionality to it. I inherited the control and added my custom properties. However, I would also like the client-side functionality to call a different JavaScript function.
In order to do that, I will need to supress what is happening in the AddAttributesToRender method because the name of the function is hard-coded there. Here is what comes up in Reflector for the AddAttributesToRender function in RegularExpressionValidator:
[Code]...
Note: I tried to add the expando property before the parent class does to see if the code would check for its existence and skip it, but that just causes an exception.
I arrive from years with Oracle plsql. Now I'm trying vb.net I created a function that return a char value, so written:
[Code]...
The question: I will create a function get_type(...) in vb.net that calls the tsql function written above... how can I call the tsql function [abc].[GET_PERSON_TYPE] in vb.net function get_type(...) function?
I have an application going here Form1 has a panel on it named TargetPnl. I need my TargetPnl to display my user control named Vviewer when I click my SearchBtn and also need it to disappear when I click another button.
View 1 Replieshow can i call a VB function - deleteevent() in usercontrol.ascx.vb from a javascript function in clickhandler(e) in usercontrol.ascx. The call should cause a postback because I need the usercontrol to display the changes.I am currently trying to do it by using a linkbutton with style display:none, and calling its click event from the javascript function. But i dunno how to call the click event.
View 2 RepliesI have an aspx page that has two different user controls. I want to find user control A and be able to set properties, etc., from user control B.
I was thinking I could do something like this:
Dim CMFilters As Control = Me.Parent.FindControl("CMFilters")
...but that doesnt work to be able to set properties and call methods. I somehow need to get the user control and and declare it as that user control type.
In a user control I have the code shown below.
I now realize that it is incorrect because the container's InitializeComponent property initializations have not run yet and they must be run prior to Refresh being called.
How (where) can I run Refreash after the container has initialized this user control.[cod]e...
i am using vb.net 2005 to developed desktop application I am having two windows form user control , the first control name con.vb containing the design and code for connecting to database and getting a list of my project values in combo box.
Now the second user control report.vb which i am using to generate some reports , since the code behind is using connection to connect to various project database , so i want to get the value of
First user control into another how i can get the i have tried the below but its giving me error in run time but no error in design or code behind -
MR.MainForm.Connection1.project_combobox.SelectedV alue.ToString
Error i am getting is :
System.NullReferenceException was unhandled
Message="Object reference not set to an instance of an object."
Source="MDR"
I am trying to call a php function from .net. I tried to a webrequest method but I am not sure how to specify the function to call in the url. A link below shows the method I am trying to call.[URL]..
View 2 RepliesI have created a new Class Library in visual basic and called it 'TestDLL'. I have a TestDLL.vb file where I put in this code
Class TestDLL
Function ReturnHello() As String
Return "Hello"
End Function
End Class
Then I clicked on the build tab and built the solution. I then copied the DLL 'TestDLL.dll' to C:TestDLL.dll
I am trying to use that DLL in a console application. I have tried this code but I get an error: System.EntryPointNotFoundException was unhandled Message=Unable to find an entry point named 'ReturnHello' in DLL 'C:TestDLL.dll'.
Declare Function ReturnHello Lib "C:TestDLL.dll" () As String I have added TestDLL.dll to the references for the console application and got that to work, however my goal is to load and unload different .dll files without restarting the application. I have a lot more code besides this, but I'm just trying to find out what commands I could use for just calling functions from DLL files.
There was something I was reading about assemblies, but all I get that to do is list the classes in my dll file. I will already know all the names and locations of the .dll files, and also the class and functions that they contain, because I will be building all of them. how I can get a simple function return in my console application.
How to declare following function in vb2010?[code]
View 5 RepliesI have a regular application form with a WebBrowser control.I have strung together a .htm file (from a regular text file) which I then assign to the WebBrowser control. In the html file, I have filenames mentioned.I am trying to string together the html in such a way as to give a clickable link or button that will parse into html and open the corresponding file in another WebBrowser control in VB.I have tried using VBScript and JavaScript to put a button in the html.As long as the function or sub I call is also in the same html document, it works, but I really need to transfer the control back into visual basic where I can do the heavy lifting I need to.can I just not do this as a regular VB application? Any way to do it without adding the complication of requiring ActiveX?
View 3 Replies