I have 100 buttons btn1,btn2,btn3,..,btn100. I want to change the names of these buttons using for..next and create 100 subs btn(x)_Click (X:1-100)How can I do that?
View 23 RepliesI have a page where the page loads with the code as shown below. Pretty much every other sub on the page uses the variables gFilename, gPicType and gPicPath. In every other routine I have to go through the process of recreating gPicPath (as per the if/then block in the code). How do I create these variables ONCE, and then store them so that all the other subs can access them?
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
' check to see if this is the first time the page is loaded.
If IsPostBack = False Then
[code]....
Using Visual Studio 2008 I am trying to create two subs using the same handles:
Private Sub checkwin(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click, Button2.Click, Button3.Click, Button4.Click, Button5.Click, Button6.Click, Button7.Click, Button8.Click, Button9.Click
[Code].....
As these both use the same handles one sub overwrites the other...... Both subs contain If statements. Do I need to create two different handles... and how do I do this so that the handles use the same buttons?
I'm trying to create a .dll in VB Express with multiple functions and subs.
For the .dll program, I create a class module with:
Public Class Class1
Public Function ReturnOne(ByRef MyVar As Integer) As Integer
[Code]....
Upon execution, it tells me that it cannot find the entry point in the .dll.
I am trying to access Some HTML buttons. I am using vb.net 2008 platform to click these buttons programatically.Problem is that the all 17 buttons are without id and have the same name type and value and are in a same form . how to click each button indivisually . Here is the HTML code of the these buttons.
View 2 RepliesI am trying to access Some HTML buttons. I am using vb.net 2008 platform to click these buttons programatically . Problem is that the all 17 buttons are without id and have the same name type and value and are in a same form
View 14 RepliesHow can I sort label names on buttons within a form. Automatically sort the names and put into the correct place within the form. A-Z order sort can be left to right. Want some sensibility to the form not all mixed up.
View 4 RepliesI am using Visual Basic 2005 to develop a proframme and I have TextBoxes, Lables and Buttons in that.I want to name these controls. I wish to superscript the Text. i.e., to denote Sq.mm - as mm with power 2. But if we type or cut & paste from Ms Word, the typed name is changing as mm2. The power i.e. 2 can not to typed with superscript text.
View 8 RepliesI'm getting familiar now with using the Dataset Designer and how it makes for quick and easy updates and query of tables. I use to use the OleDB commands and leave the Connection String as a Global Constant so I can easily change it if the server name changes, or if we have to re-direct the .NET to another instance of the database.
But now that I use the Dataset designer I'm concerned that I maintain flexibility and support in the long run. how the Dataset designer works and where it stores it's connection string info? And how difficult that would be to update. It looks like I modify the App.config file, but I'm unfamiliar with this.
What am I getting myself into? It looks like a standard XML file. Is that it?
I'm developing a Windows form. It contains textboxes, checkboxes and so on. When I move these controls (e.g. cut & paste from one frame to another in the same form), their names do not change (and it's good of course) but their function and event names are changed. Why it happens? How to avoid it? It causes me to move all functions from the old control to the new one. It's a lot of work and very annoying.
View 10 RepliesI have hundreds of .pdfs that I downloaded that have names that are not helpful at first glance. Part of the download was a 'key' that lets me know which file belongs to which person (I have this in excel). I'd like to know if there is a vb script out there (or one I could get help writing) that would look in a folder and rename the files based on the accompanying spreadsheet.
View 5 RepliesI am struggling to show different views of gridview with database values. Here is my requirement. Database Table:I need to show one drop downlist with three values 1,2,3. If user selects 3 i Need to show a grid like belowAge,AnnualSales and Assortment are names which are coming dynamically from database.
View 2 RepliesHow to change Calendar's months names language?
View 4 RepliesI have filled a datagridview with a dataset using the following code.
Code Snippet
How Change the Header Names in the DataGridView1 By DataGridView2 In the sense I want to change the title in the pole DataGridView1 Through the fields in the first column DataGridView2 The first field in DataGridVeiw2 =The first column heading in the DataGridView1 the second field in DataGridVeiw2 =The second column heading in the DataGridView1 And so on
View 18 RepliesI would like to use checkboxes to determine the names of multiple labels, but seems like a lot of code.
[Code]...
Is it possible to change the looks of the buttons?
View 3 RepliesI'm attempting to create folders from various files within one folder, based on the file names - extensions. I found this code snippet from this link, however I'm getting a loader lock error ("Attempting managed execution inside OS Loader lock. Do not attempt to run managed code inside a DllMain or image initialization function since doing so can cause the application to hang.").
[code]...
I have a table with fields player1Name,player2Name..etc. How does one create the field names dynamically. I tried this..doesn't work obviously.[code]....
View 6 RepliesIt's just a small calculator project so it's no big deal, but after I had built the project, I wanted to change the project name and all the file names that had that string in it (and all internal references to that string). I had played with this before and knew that it was asking for trouble but I thought, "What the hell, I'll try it again." feeling a bit brash.
Well, everything works fine in debug mode, but there is this DOS window that pops up just before the main form does, and it doesn't go away for the entire debugging session. I think I see that window pop up on all other projects too (if the main form doesn't cover it up completely), but normally, it's only there for a split second.
I am trying some Uiculture change functionality. In that I need the name and text of controls in a form to change the culture. I got some Demo project and it is in C#. I tried to make the same functionality with the C#.net and Also using VB.net. But the below mentioned code returns control name with an underscore as prefix. But I don't want underscore. Code is actually written in Class library. It works perfectly in C#.
Code is written below
Dim fields As FieldInfo() = form.[GetType]().GetFields(BindingFlags.Instance Or BindingFlags.DeclaredOnly Or BindingFlags.NonPublic)
How do you maintain the appearance of a disabled button in VB.Net? Basically, when I click a button, I want its background colour and font colour to stay exactly the same as before I clicked it.
View 1 RepliesWhen I change the BackColor for a Form, and then add new buttons, they have by default the same BackColor as the Form itself. That does not show on my Windows 7 development computer, but when I use the program on an XP machine, all buttons appear the same color as the form.
I correct this by changing the button's BackColor property to ButtonFace, but it is a pain to do it all the time and some times it gets past me and a wrong color button goes into the application.
Is there a way to change how this works so all buttons are placed with ButtonFace BackColor by default?
I have a program with lots of buttons and textfields etc in my main class (I guess), in the default on called Form1.
Aaand, I want to create a class, but can someone tell me how to change the text on labels and buttons from that other class, since the labels and such exsists in the main class?
I have a directory with about 200 files in it. Is there a way to create a folder for each file with the folder name being the same as the file name minus the extension and then put the file in the folder.For example: Folder "test" would be created from file "test.doc". Then the file "test.doc" would be moved into folder "test".I have some experience with visual basic, and my thought process for this was: make a loop that brought in each file name > store as a variable > create folder with the name in the variable > remove the last four characters from the folder name > move file into the folder > clear variable > repeat.
View 9 RepliesThe code below creates multiple folders based on different file names and moves those files into the new folders. For example, files ABC and XYZ are moved into a newly created folder named ABC and XYZ. I want to advance the code to allow slightly different file names to go into a common folder. Example, I want file ABC_rock, ABC_soil, and ABC_water to be put into a folder named ABC still, AND file XYZ_rock, XYZ_soil, and XYZ_water to be put into a folder named XYZ. I do not want a separate folder created for ABC_rock, ABC_soil, and ABC_water.
Dim strOutputLocation As String = "C:\Temp"
Dim rootPath As String = strOutputLocation
For Each filepath As String In IO.Directory.GetFiles(rootPath)
[Code].....
Okay, say I have a class named "ChannelList", and it raises an event named "FoundChannel"
But what I'M wanting to do is create multiple classes of different names that use that class, but I want to have all of the "FoundChannel" events be handled under one single sub routine?
I have a For Each loop going through the controls in a panel disabling them. When the loop reaches one certain grid control and disables it the CheckedChanged event fires for the next control in the loop which is a radio button.
The call stack is as follows:
System.Windows.Forms.dll!System.Windows.Forms.RadioButton.OnCheckedChanged(System.EventArgs e = {System.EventArgs}) + 0x15 bytes
System.Windows.Forms.dll!System.Windows.Forms.RadioButton.WnProc(Microsoft.AGL.Forms.WM wm = WM_RADIOBUTTON_NOTIFYVALUECHANGED, int wParam = 0, int lParam = 0) + 0x17 bytes
[Code]....
I don't understand how control.Enabled = False can cause the OnCheckedChanged event.
How could I can change de back color of multiple buttons (2700 aprox) depending on the results of my SQL Query i know how to doit one by one i just want to doit in another way
View 5 RepliesWhen I set the button background image in properties, it looks great. When the button is clicked, the image needs to change. I tried to use an image list like this: btnSample.BackgroundImage = ImlStimuli.Images.Item(0)and I tried loading them from a file. I can get them to read, but the image always turns out blurry or distorted. I've tried all variations of alignment, BackgroundImageLayout like stretch/zoom/centered, and I changed flat style, but nothing has worked. Is there a setting or something that I'm missing in properties?
View 4 Replies