Comparing Values For Validation?
Jan 20, 2011
I have a form where the user is to enter the beginning odometer value and ending odometer value. I have the code correct to check and see if there is a numerical value entered into to each text box. When the user enters the ending odometer value and that value is less than the beginning odometer value I want an error provider to stop the user from tabbing to the next field and let the user know that the ending odometer value cannot be less than the beginning odometer value.how to set this up. I have some code in there that doesn't seem to be doing the job for me.
Private Sub BeginOdometerTextBox_Validating(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles BeginOdometerTextBox.Validating
'test beginning odometer for numeric value[code]....
I have a theory that the variable for the beginning odometer value is working in the ending odometer value block of code. Not really sure about that though.
View 11 Replies
ADVERTISEMENT
Dec 19, 2010
I'm working on a Website in Web Developer 2010 where the content of a text box is checked against a list of values to find a match. There must be an exact match for the user to be allowed to proceed to the next step of the wizard.
Is there a shorter method to do this using the VB 'If' statement, other than specifying each condition individually?
I've tried something similar to the following, but for the amount of values it would be more practical if there was a shorter method.
If TextBox1.Text = "User1" Then
Label1.Text = "Ok, That username is valid. Click NEXT to continue"
LinkButton1.Enabled = True
[Code]....
View 6 Replies
Aug 16, 2010
I am fetching DataTime value of a SQL Database, LockDate. Dim diffDate As TimeSpan diffDate = DateTime.Now - LockDate minutes = Convert.ToInt32(diffDate.Minutes) hours = Convert.ToInt32(diffDate.Hours) Minutes value is showing incorrect values.
View 1 Replies
Jun 29, 2009
I have five listboxes that are populated from five different datasources basically I have connected to an MS Access database and I am running SQL queries effectively so the five listboxes are populated via datatables for example dtInterests, dtHobbies, dtMovies, DtTV and dtMusic my question is how would I compare the values that are being stored in each listbox I want the application to check each of the five listboxes and if the value is the same (in my case the valuemember is the customer id) then store the result somewhere (in a textbox)
View 5 Replies
Sep 18, 2009
I am usingh VB.net, I have two textboxes see below:
<tr id="trCheckedBy2" runat="server">
<td>
Application Checked by 1:
[Code].....
Now I want to give error message "Username can not be same" when CheckedBy2TextBox text is same as CheckedBy1TextBox. It would be good if we can use .net validator.
View 1 Replies
May 24, 2012
I'm tried creating an analog clock and I realized I was terrible at trig and gave up. So instead I'm just creating a digital clock. I'm having problems getting the alarm to go off. Lemme explain my layout, I have 3 comboboxes. 1 is for the hour, 1 is for the minute and 1 is for am/pm.
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click
'The commented out variables are global
[Code]....
View 1 Replies
Apr 26, 2011
I have 10 values to compare against each other for duplicates and would like a recommendation to do this most efficiently. The values are associated with the NumericUpDown control. I'm using VS and VB 2010.
View 3 Replies
Jul 8, 2009
I have a gridview(editable).
It may have more than 1 row with columns startdate and enddate.
StartDate EndDate
4/4/09 6/6/09 (valid-existing row)
1/2/09 3/3/09 (valid-existing row)
7/7/09 9/9/09 (valid- edited row)
3/3/09 6/6/09 (Invalid - edited row )
When you see the above table/gridview, you will know what I want to validate.
I should be checking whether there is any row having start-end dates lying within the existing date range, if so I should invalidate them.
I shd have only distinct date range in my rows.
How do I do that.
May be Useful note: I will be able to check which column name I tried editing in that row.
Do any of you have some ideas how to create a logic to accomodate my validation issue in my webbased gridview control ?
View 1 Replies
Jan 19, 2012
I am updating an application I've written used by my employer, a University, to allow students to register for their desired residence hall. I'm working on a new feature that will allow students to "partner" with another student - so that when one or the other registers for a room, the other student will be registered as well.
[Code]...
View 3 Replies
Aug 5, 2009
I've tried different approaches to query a simple xml and compare one of it's values but none of them worked well.
Consider the following XML structure:
<?xml version="1.0" encoding="iso-8859-1" ?>
- <Shops>
- <Shop>
<text>Northampton</text>
<value>NN</value>
<currentdate>050809</currentdate>
<labelcounter>1</labelcounter>
[Code] .....
I have the shop name in a drop down list which is ShopsDDL and it's set to autopostback. What I want to achieve is:
On postback, check for a xml node where node's text = shopDDL shopname
And retrieve also this node's currentdate and label counter.
Rhen, if the node currentday = today then increment labelcounter by 1
Else set labelcounter = 1 and currentday= today
My problem is the XML query, I can do all the logic as soon as I manage to retrieve data from the XML.
View 1 Replies
Jul 10, 2009
I am making a app that reads options of a ini
dim config as new iniconfigsource("patch.ini")
dim test as string = config.configs("news").getstring("test")
Then I made a dropdown with options
I want my script to compare the values of the dropdown with the string readed from the ini
then uses it as selected value (the so called standard value) the one uc without clicking on the arrow if the none of the values match with the string value of the ini then it executes
dropdown1.selectedindex = 0
View 4 Replies
Sep 19, 2010
I accept both C# and VB.NET suggestion, even though I'm writing an app in VB.NET I have two lists of intergers
List1 {1,2,3,5}
List2 {2,4,6,7}
I want to have new List3 {4,6,7} which is composed of elements of List2 that are not in List1. I know I can write a nice For Each loop for this but I want it done in LINQ I've been looking for such methods at Enumerable Methods, but I can't find it.
View 2 Replies
Jun 19, 2011
how to compare two list boxes and remove identical values or add them to a 3rd list box, but for some reason it's not working when I retrieve the data from a mySQL database using ADODB, here's my work cut down by a fair bit for it to be easy to understand.
For k As Integer = lstFriends.Items.Count - 1 To 0 Step -1
If lstDBFriends.Items.Contains(lstFriends.Items(k)) Then
lstFriends.Items.RemoveAt(k)
End If
Next
I've tried everything from changing the data type on the mySQL database to storing the retrieved data from the database to String declaration and it simply wont compare the two listboxes
View 4 Replies
Aug 11, 2009
I have a query in Access 07 that identifies the following fields: ContractID, status, start date and end date. For each contract, I've been able to search a network share and upload its corresponding file; however I need to skip the import and write a record to a table for contracts with the same start and end date. I've included a placeholder (in bold below), but how do I make the date comparison work? Do I need to create a multi-dimensional array for that or can it be done with the code I have?
Private Sub cmdRefreshList_Click()
DoCmd.SetWarnings False
'Create an array based on the true-up contract IDs.
[code]....
View 2 Replies
Dec 15, 2011
I need to validate a particular coloumn in datagrid for duplicate values before inserting into database. I am using datatable.
View 9 Replies
Apr 14, 2009
I am trying to create an input validation for my program to prevent the user from entering negative values. I've been using:
If (decLabor < 0) Or (decPartss < 0) Then
MessageBox.Show("Input prices for parts and labor must be positive")
View 7 Replies
Jun 21, 2010
I have a program that reads in lottery results from the past 6 months (from the national lottery site) from a text file
31-Mar-2010,29,18,38,44,14,43,13,3,GUINEVERE
27-Mar-2010,32,38,11,15,42,6,24,2,GUINEVERE
24-Mar-2010,3,49,28,5,23,42,41,4,GUINEVERE
and stores it in an array (n-1,6) where n is the number of lottery lines, so the array looks like
0 1 2 3 4 5 6
0 29 18 38 44 14 43 13
1 32 38 11 15 42 6 24
then, in a 1D array I store the player's numbers, simply as
0 23
1 16
2 19
[code]....
I want it to take each number from the player's number array individually and compare them to each row individually in the lotto results array i.e. the first six cells in each row in the results array will be compared with each user number to find any matches, if a value matches then a count is incremented. if the count is greater than 2 but i'm getting no where with it :( i've been trying to use the For To loops but keep getting index out of range, or else nothing is happening at all!
View 5 Replies
Jul 22, 2010
I am checking for empty string values, but how do i see for the Quantity text box if the user chose only numerical values after the empty string. For example...
[Code]...
View 2 Replies
Mar 20, 2012
I have the code below on a timer( "b" is a bitmap )
If
Not (Clipboard.GetImage
Is
Nothing)
[Code]....
The problem is that it raises the event even if the picture didn't change.
comparing the 2 images without actually comparing them pixel by pixel (too slow to do the job)?
View 2 Replies
Sep 17, 2009
In a partial class, I declare a integer. Then, depending upon if a criteria is met, I set it's value to either 1 or 0. Then, I try and compare the set value, but instead of it being equal to 1 or 0, the code behind that I've stepped thru shows it ends up equaling &H0 or &H1. What does that mean? Why does it show a value of &H0 in the code behind when I debug instead of either a 0 or a 1???
View 2 Replies
Nov 15, 2011
First my prog scan a specific path "C:music" which contain Mp3. Then it takes the MD5# of all mp3 and put it in a listbox1. Also on the formload it does open a ".txt" which also contain MD5# that goes into listbox2.Now this is what i am looking to have :When i click my button it compare each line of my listbox1 to listbox2. If , for exemple , the first line of listbox1 is already in the listbox2 then it delete the first line of listbox1 (listbox1.items.removeat(0)). And Do until listbox1.items.count = "0".
View 2 Replies
Dec 14, 2010
I am trying to carry out a synchronisation of two databases: one on the server and the other on a local machine. So that even when they are not connected on the network, the local database can carry on accepting data but when the network is back on, the local database can update the server and the server can also update the local machine with data it accepted during the time when the network was off. by first comparing two tables in two databases and then if they are any differences the updating begins and i've since been stuck.
Private Sub btnCompareTables_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCompareTables.Click
'dont know which arguments to put when calling this function
'How do i tell the computer which databases to compare
Comparing()
[code]....
View 1 Replies
Aug 30, 2009
I want to track changes of a document which sits in a DB table like :
document starts
document continues 1
document continues 2
document continues ...
document ends
(Each line is a record but if needed I can combine them all to one record)I have the document before changes in one table and the document after the change in another table.My problem is that if I just compare them by ID then I'll get many more changes than actually occured. Ex: If a line (/record) was added between record 2 and record 3, instead of tracking 1 change I will see that all the records from 3 and on have changed (because they will be pushed off by one record). Can be also something which knows to compare documents and I'll take the information out to document for comparison.
View 1 Replies
May 20, 2009
Let me provide a little detail to explain what I'm trying to accomplish before I get into the nuts and bolts of the question. I've got two data sources - one is a SQL Server containing part numbers, descriptions, etc. The other is a CAD system that does not have a database in a traditional sense. What I'm trying to do is read out the bill of materials from the SQL Server and compare it to the CAD assembly drawing to ensure that the CAD system contains the same information as the SQL Server.
Getting the data from the SQL Server is fairly straight forward. I query the database and populate a datagrid. Done. Quick. Easy.Getting the data from the CAD system is a little more involved. I have to load the assembly drawing to get a listing of all the component parts and then load those individual drawings to pull the "Part Number" property from the drawing. This is a somewhat time consuming and slow process (unfortunately) since each of the files must actually be accessed. I load those properties into an array (I guess a list might be more efficient).
So now I have a datagrid and array with part numbers. I need to compare them and colorize the grid accordingly. The grid should remain transparent if the part exists in both, color the row yellow if it only exists in the grid, and add a row colored red if only in the array.
As best I can tell, this means looping through the array on each line of the grid. The thought process is this:Default the grid to yellow rows.Loop through the grid and loop through the array to compare. If a match is found, make the row transparent and delete the element from the array.After step 2 is completed, the array should only contain elements that are not found in the grid. Resize the array to remove the empty elements.Add the elements of the array to the grid and color those new rows red.The problems with this logic is that it seems expensive from a performance standpoint. Surely there is a better method? Also, if I modify the grid in some manner (like a resort) I have to go through the process again.
View 4 Replies
Dec 8, 2010
i have 4 listbox and i named it
1. listbox40
2. listbox20
3. listbox5
[code]....
View 11 Replies
Dec 5, 2011
I am wanting to be able to check to see if two images appear to be the same, within a certain threshold.These two images are the same to the eye, but one has slightly different colors. I have tried the following example:
[URL]
Unfortunately, it only seems to detect when the images are identical. How can I determine if the images are the same within a certain threshold, with VB.NET?
View 2 Replies
Nov 17, 2010
I am a c#/asp.net developer and I am having to work on a VB/asp.net. I have two variables
Dim originalDate as DateTime?
Dim newDate as DateTime?
Both nullable datetimes, originalDate is a nullable date I am getting from the database and newDate time is set in code, I need to compare them, they can either both have dates, neither have dates or one have and one not.
I have a bit of code as follows:
if origEndDate = origEndDate then
When both origEndDate and origEndDate are "nothing" this statement is false (well when I run it in the watch window it comes back as nothing)!I don't understand why this is the case because I was under the impression doing an "=" compares the two values and as they are the same surely it should be true? What syntax should I be using as in C# I can do the above as so:
if (origEndDate == origEndDate) { }
and it will come back as true.
View 4 Replies
Dec 17, 2009
I'm creating <!-- /* Font Definitions */ @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4; mso-font-charset:1; mso-generic-font-family:roman; mso-font-format:other; mso-font-pitch:variable; mso-font-signature:0 0 0 0 0 0;} @font-face {font-
[code].....
View 2 Replies
Oct 19, 2010
Here's my test code:
Dim testSingle As Single = 7.2
Dim testSingleF As Single = 7.2F
Dim testDouble As Double = 7.2
[code].....
View 2 Replies
Nov 7, 2011
how can i compare both datagridview by using ID?
example 1 : ID 4016.. the data from client looks edited on filename "New Divide(beta)".. so, that ID will put into listbox..
example 2: ID 4039.. the data from client different from server on Notecharter "Y..JZ".. so, that ID will put into listbox..
so, how can i compare all data in row for each column from server datagridview? If the data in row are same with server, it will be ignore..
View 3 Replies
