Completely Unload A Form?
Sep 25, 2006
I have a form that I use to get the user to input such as a username and password in order to make a network connection. This connection can be disconnected and reconnected as many times as neccessary whilst the application continues to run.
I obviously, therefore, need the form's text boxes, combo boxes etc to reset to their blank versions every time that the form is shown.
In VB6 this was easy; you just unload the form which completely removed the form from memory and thus the next time you showed it it was reset to it's blank state. In VB 2005, however, there is no unload so we have to use Close. I have done this and assumed that it would function in the same was that unload did in VB6.
The problem is that when I close the form using the form.close event handler the form disappears perfectly but when the form.show/showdialog is used the old form data still remains telling me that the form hasn't actually been unloaded but rather appears to have just been hidden.
View 3 Replies
ADVERTISEMENT
Jun 16, 2010
VB 6.0
Private Sub Form_Unload(Cancel As Integer)
VB.NET 2008
VB 6.0
Private Sub Form_QueryUnload(Cancel As Integer, UnloadMode As Integer)
VB.NET 2008
is VB.Net supported this two events ?
View 2 Replies
Jan 30, 2010
I want to run a subroutine to clear some things up when the user exits the application. I tried looking for a Form_Unload event or anything similar, is there a way to do this?I open a database connection on Form_Load, and would like to close it when the user exits the app.
View 2 Replies
Apr 22, 2010
I like to know how to unload a single form in vb.net.I tired form.showdialog() and form=nothing,but this is not working.
View 5 Replies
Feb 15, 2010
I have single form in VB.net and I want to close or unload this application in Form1()event only once it get sussessful. I have some code to execute in form1 and after successfule execution I want it to unload. For this I have written below lines but it throws an error.public Form1()
[Code]...
View 2 Replies
Jun 29, 2009
Me.Close()
MDI.Show()
Me.dispose()
MDI.Show()
i am using this code but in both condition whole wpplication gets closed i just want to dispose that single form what to do?
View 3 Replies
Apr 5, 2010
I'm trying to add a MsgBox and a few other things when a user exists the program but I can't seem to find the event for the form.
I tried the "leave" form event but it's not working.
[Code]...
View 5 Replies
Oct 14, 2009
i used to write the code to show another form and unload the current form it always told error on UNLOAD form2.show unload me Do i have to use the code :
.Dispose()
or is there another suggestions
View 2 Replies
Jan 21, 2010
I have many forms in my project. When the project starts to run, the form named as˜frmMawill be loaded. I had given links to load other forms from this form. When other form gets loaded I want to close this main form. To do so I used the following
View 3 Replies
Dec 2, 2010
recently i came across a requirement. I have to create a text box with a vertical scroll bar. I hav to check whether the scroll bar is dragged down completely or not. i hav to do it in VB.net
View 1 Replies
Oct 9, 2009
load and unload form just like vb6 in vs 2005 using vb.net. I'm trying this code.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Me.Close()
[Code]....
but when i click the button, nothing happened..
View 1 Replies
May 29, 2009
I am using MDI form and nearly more than 10 child forms.. Here, When i load or unload some forms, it flickers very much.. It is not as much good.. So i need to avoid this.. How to avoid form flickering?
View 3 Replies
Sep 13, 2009
When i dim a variable as a form and then close it ( frm2.close() ) then just the form window will be closed. How can i close the form completely so that everything like a timer will be closed too?
View 4 Replies
May 25, 2011
How to hide the main form upon load (startup)??? I have tried Me.Hide() And some others ones, but none of them actually HIDE the form upon startup. It also has a NotifyIcon but once again it will not hide the main form..
View 6 Replies
May 22, 2009
I want to pass a few variables to another page. Currently I'm using response.redirect and passing the variables in the url. I'm not really interested in using Session Variables. Is there a way to pass hidden variables in .NET to a completely different form?
View 4 Replies
Jan 31, 2011
finally my programme works. It will test the other programme, which is a Bid Tabulation programme allowing up to 10 Supplier Quotes each one having up to 500 line items; handling mixed currencies; many additional lines of specific information; etc.; using any combination of Suppliers and Line Items.However, I thought that I would let you know about some of the things I had to do to make it run.Obviously, the programme can bring up the Bid Tabulation programme very quickly, and then moves on to obtain the handle of the first form. But I had to insert a timing delay in order for the programme to report that it had found the handle; I also had to add the same delay all over the programme in order to see a valid handle number instead of "0".In addition to this I had to cycle through the ChildHandles, as you had indicated in order to get to the handle I needed. This raised another problem. I wanted to enter information in the same sequence as the tab order, but I found that the ChildHandle order was all over the place; generally back to front. In other words the tab order which went from top to bottom, and left to right, whereas the ChildHandle order was sometimes all over the place.
Is there a simple method of rearranging the ChildHandle order, as there is for arranging the tab order? I had to reformat several of my forms in order that entries would make sense. Imagine the table below is a form with 23 TextBoxes. The order that I need them to be filled is from top to bottom, and left to right, but the actual order of the TextBoxes is as below: [code] This message does not really require a resolution to a problem, unless there is a way of re-ordering the handles without having to completely reformat the form.
View 1 Replies
Sep 10, 2010
how to ensure that a form stays on-screen completely and cannot be dragged outside the bounds of the window.
This is because the user needs to be able to completely see the form without any of it being cut off.
View 5 Replies
Sep 23, 2009
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Me.Close() End Sub
after the program was executed, warning is come out like this "object Disposed Exception was unhandled"
View 7 Replies
Dec 2, 2010
I have an ApDomain that is running a Main Routine, for example:
Public Sub Main() Implements Interfaces.IScript.Main
For a as Integer=1 to 99999
[Code]...
View 3 Replies
Nov 30, 2010
I have a button that I am trying to only allow specific people to see. So I need to unload it or hide it if they aren't the correct person or have the requirements. When I try to use btnUpdate.hide() in my else it will first allow someone to click on the button and use it then it will hide it. It's not hiding the button right away. Thats what lead me to think that maybe i am suppose to unload it some how if its not the correct user or users.
How do i unload a button if its not the correct users.
View 4 Replies
Feb 26, 2010
I am calling a Fortran DLL from Vb.Net. I am declaring this in the class and then I am calling the DLL. I made this Fortran DLL from a Fortran Exe code. If I just use the exe code of the Fortran program I get different values than if I use Fortran DLL. First I thought may be there is a delay, so I used Sleep() before the end of the loop. But this does not change the values I am getting. I don;t understand why the results are different in exe and DLL, since I made DLL using the same exe code. I am not sure if the DLL is completely exited before it called again. Below is the code (partial).
Declare Sub abbb Lib "C:Documents and Settingssanjida.tamannaMy DocumentsVisual Studio 2005ProjectsDll53Dll53DebugDll53.dll" Alias "aaa" (ByRef TOL1 As Single, ByRef tt1 As Single, ByRef TEND1 As Single, ByRef t_exposure2 As Single)
[Code]....
View 5 Replies
Feb 9, 2012
Actually i am a VB6 developer, switching to VB 2010 (VB.NET), in visual basic we use to do Form1.unloadme.However, its not working in VB2010.
View 1 Replies
Dec 1, 2011
I am working on a project where I have to load assemblies (lets call them tasks) at runtime, run the task and then be able to kill off the whole assembly so that the dll can be replaced without interrupting the main application.There are many of these tasks running within the main application,some run sequentially and some run in parallel.Occasionally one or to of these tasks need to be updated and then re-added to the queue. Currently we are stopping the entire application and interrupting the other tasks at whatever stage they are at, which is not ideal.I have figured out that I will have to load each assembly into a separate AppDomain, but loading the assemblies in those domains is proving difficult, especially when I need to actually run the tasks and receive events from them.I have been looking into this problem for a couple of days and have still not managed to get a working proof-of-concept.
I have an Interface for the tasks which includes a 'run' and 'kill' method (subs) and a 'taskstep','complete' and 'killed' event.'taskstep' returns an object to be cached later, 'complete' fires when the whole task is done and 'killed' fires when it is ready to be unloaded.There should also be a timeout on the whole process of two hours and a timeout of 2 minutes on the killed event in case it gets stuck, at which point I would like to be able to unload it, forcing any threads to terminate (which is what 'kill' should do anyway).Each assembly may contain several tasks, all of which should loadable be unloadable.I have no problems loading these tasks as 'plugins' but am lost when trying to both use them and unload them. If I have to create some elaborate wrapper then so be it but is what I need even possible? I have tried inheriting from MarshalByRefObject but I do not even know the assembly fullname unless I load it first, which then locks the file. I have tried loading from a byte array of the assembly. This means that the file is not locked but a copy of it remains in the current appdomain. This will become problematic over the following months / years![code]
View 2 Replies
Oct 23, 2011
I'm kinda new here, and I didn't know what forum to put this in, so I just put it here. I wanted to load an assembly to an Application Domain, use it, then unload it when I'm done with it. The assembly uses too much memory. The problem is: After I unloaded the assembly, the memory used is not getting freed. I was watching the performance all the time. The available memory increases only after I close the whole application. And that assembly is the only thing that uses a lot of memory in my application. Here's the code I used to load and unload the assembly: How can I free up the memory without closing my application. The memory was suppose to get freed up by simply unloading the assembly that uses it much.
View 2 Replies
Jun 23, 2010
Followup to a previous post: It's been determined that Windows Device Drivers cannot be written in VB.NET; that's being dealt with separately.
What I'm interested to know here is if there's a DotNET Framework facility for adding/removing/managing device drivers; for example, can I build a VB.NET application to list loaded drivers, or drivers attached to a specific device, then load or unload those drivers as needed? It never hurts to try. In a worst case scenario, you'll learn from it.
View 1 Replies
Sep 13, 2010
i need help to delete a record in a database table in crystal report, after the report had been view from the new page and when the page is close. the report is done in vs2008 c#.
View 2 Replies
Feb 26, 2009
In the middle of converting VB6 code to VB.NET, I need to replace the following code that intends to close all open forms remaining in the application.
'close all sub forms
For i = My.Application.OpenForms.Count - 1 To 1 Step -1[code].....
I've replaced the Unload function with Close (as indicated by TFM), but the compiler complains that OpenForms is not a member of My.Application.Where can I access the open forms?
View 4 Replies
Nov 23, 2009
Im trying to delete a file on closing a form, but am unable, as the file is still in use.
Private Sub Main_Unload(ByVal Cancel As Integer)
If System.IO.File.Exists("Mydll.dll") = True Then
System.IO.File.Delete("Mydll.dll")
End If
Is there a way to unload this dll file or force a delete as the file is no longer needed when the program is closed.
View 7 Replies
May 14, 2012
How could I make the datagridView to unload data from database. I mean, once you make datagridview, it will load data from database so I would like to make it to not load any data. This is for searching purposes where you want to display datagridview look like empty and when user enter information to search in, it then has to display data.
Something like Students.datagridView.
View 2 Replies
May 6, 2012
I have an application in which i need to load a specific keyboard layout only when application is running and a text box (Textbox1) is under focus. I don't have an idea to load a specific keyboarded in VB.NET via programming.
View 1 Replies
