VS 2008 On Form Unload?
Apr 5, 2010I'm trying to add a MsgBox and a few other things when a user exists the program but I can't seem to find the event for the form.
I tried the "leave" form event but it's not working.
[Code]...
ADVERTISEMENT
VS 2008 How To Unload The 'form' From Memory
Jan 21, 2010I have many forms in my project. When the project starts to run, the form named as˜frmMawill be loaded. I had given links to load other forms from this form. When other form gets loaded I want to close this main form. To do so I used the following
View 3 RepliesUnload Method And Query Unload?
Jun 16, 2010VB 6.0
Private Sub Form_Unload(Cancel As Integer)
VB.NET 2008
VB 6.0
Private Sub Form_QueryUnload(Cancel As Integer, UnloadMode As Integer)
VB.NET 2008
is VB.Net supported this two events ?
.net - Unload Even On Form?
Jan 30, 2010I want to run a subroutine to clear some things up when the user exits the application. I tried looking for a Form_Unload event or anything similar, is there a way to do this?I open a database connection on Form_Load, and would like to close it when the user exits the app.
View 2 RepliesUnload A Form In .net?
Apr 22, 2010I like to know how to unload a single form in vb.net.I tired form.showdialog() and form=nothing,but this is not working.
View 5 RepliesCompletely Unload A Form?
Sep 25, 2006I have a form that I use to get the user to input such as a username and password in order to make a network connection. This connection can be disconnected and reconnected as many times as neccessary whilst the application continues to run.
I obviously, therefore, need the form's text boxes, combo boxes etc to reset to their blank versions every time that the form is shown.
In VB6 this was easy; you just unload the form which completely removed the form from memory and thus the next time you showed it it was reset to it's blank state. In VB 2005, however, there is no unload so we have to use Close. I have done this and assumed that it would function in the same was that unload did in VB6.
The problem is that when I close the form using the form.close event handler the form disappears perfectly but when the form.show/showdialog is used the old form data still remains telling me that the form hasn't actually been unloaded but rather appears to have just been hidden.
Error At Form Unload In .net
Feb 15, 2010I have single form in VB.net and I want to close or unload this application in Form1()event only once it get sussessful. I have some code to execute in form1 and after successfule execution I want it to unload. For this I have written below lines but it throws an error.public Form1()
[Code]...
How To Unload A Single Form
Jun 29, 2009Me.Close()
MDI.Show()
Me.dispose()
MDI.Show()
i am using this code but in both condition whole wpplication gets closed i just want to dispose that single form what to do?
Show Another Form And Unload The Current Form ?
Oct 14, 2009i used to write the code to show another form and unload the current form it always told error on UNLOAD form2.show unload me Do i have to use the code :
.Dispose()
or is there another suggestions
Forms :: Unload And Load Form Vs 2005
Oct 9, 2009load and unload form just like vb6 in vs 2005 using vb.net. I'm trying this code.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Me.Close()
[Code]....
but when i click the button, nothing happened..
Avoid Form Flickering While Forms Load And Unload?
May 29, 2009I am using MDI form and nearly more than 10 child forms.. Here, When i load or unload some forms, it flickers very much.. It is not as much good.. So i need to avoid this.. How to avoid form flickering?
View 3 RepliesUnload Me In VB 2008
Sep 23, 2009Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Me.Close() End Sub
after the program was executed, warning is come out like this "object Disposed Exception was unhandled"
VS 2008 Page Unload Events
Sep 13, 2010i need help to delete a record in a database table in crystal report, after the report had been view from the new page and when the page is close. the report is done in vs2008 c#.
View 2 RepliesVS 2008 - How To Make DataGridView To Unload Data From DB
May 14, 2012How could I make the datagridView to unload data from database. I mean, once you make datagridview, it will load data from database so I would like to make it to not load any data. This is for searching purposes where you want to display datagridview look like empty and when user enter information to search in, it then has to display data.
Something like Students.datagridView.
VS 2008 How To Load/unload A Keyboard Layout
May 6, 2012I have an application in which i need to load a specific keyboard layout only when application is running and a text box (Textbox1) is under focus. I don't have an idea to load a specific keyboarded in VB.NET via programming.
View 1 RepliesVS 2008 : "unload" A File From The Adobe PDF Control So That It Is Blank?
Mar 11, 2010Is there a way to "unload" a file from the Adobe PDF control so that it is blank, like it is before you load any file? I tried Me.AxAcroPDF1.LoadFile(Nothing) but that doesn't work.
View 2 Replies.Net, AppDomain Unload Via An Interface?
Dec 2, 2010I have an ApDomain that is running a Main Routine, for example:
Public Sub Main() Implements Interfaces.IScript.Main
For a as Integer=1 to 99999
[Code]...
Hide A Button Or Unload It?
Nov 30, 2010I have a button that I am trying to only allow specific people to see. So I need to unload it or hide it if they aren't the correct person or have the requirements. When I try to use btnUpdate.hide() in my else it will first allow someone to click on the button and use it then it will hide it. It's not hiding the button right away. Thats what lead me to think that maybe i am suppose to unload it some how if its not the correct user or users.
How do i unload a button if its not the correct users.
Specifically Load Or Unload A DLL?
Feb 26, 2010I am calling a Fortran DLL from Vb.Net. I am declaring this in the class and then I am calling the DLL. I made this Fortran DLL from a Fortran Exe code. If I just use the exe code of the Fortran program I get different values than if I use Fortran DLL. First I thought may be there is a delay, so I used Sleep() before the end of the loop. But this does not change the values I am getting. I don;t understand why the results are different in exe and DLL, since I made DLL using the same exe code. I am not sure if the DLL is completely exited before it called again. Below is the code (partial).
Declare Sub abbb Lib "C:Documents and Settingssanjida.tamannaMy DocumentsVisual Studio 2005ProjectsDll53Dll53DebugDll53.dll" Alias "aaa" (ByRef TOL1 As Single, ByRef tt1 As Single, ByRef TEND1 As Single, ByRef t_exposure2 As Single)
[Code]....
Unload Option Is Not There In Program
Feb 9, 2012Actually i am a VB6 developer, switching to VB 2010 (VB.NET), in visual basic we use to do Form1.unloadme.However, its not working in VB2010.
View 1 RepliesLoad / Use And Unload An Assembly At Runtime
Dec 1, 2011I am working on a project where I have to load assemblies (lets call them tasks) at runtime, run the task and then be able to kill off the whole assembly so that the dll can be replaced without interrupting the main application.There are many of these tasks running within the main application,some run sequentially and some run in parallel.Occasionally one or to of these tasks need to be updated and then re-added to the queue. Currently we are stopping the entire application and interrupting the other tasks at whatever stage they are at, which is not ideal.I have figured out that I will have to load each assembly into a separate AppDomain, but loading the assemblies in those domains is proving difficult, especially when I need to actually run the tasks and receive events from them.I have been looking into this problem for a couple of days and have still not managed to get a working proof-of-concept.
I have an Interface for the tasks which includes a 'run' and 'kill' method (subs) and a 'taskstep','complete' and 'killed' event.'taskstep' returns an object to be cached later, 'complete' fires when the whole task is done and 'killed' fires when it is ready to be unloaded.There should also be a timeout on the whole process of two hours and a timeout of 2 minutes on the killed event in case it gets stuck, at which point I would like to be able to unload it, forcing any threads to terminate (which is what 'kill' should do anyway).Each assembly may contain several tasks, all of which should loadable be unloadable.I have no problems loading these tasks as 'plugins' but am lost when trying to both use them and unload them. If I have to create some elaborate wrapper then so be it but is what I need even possible? I have tried inheriting from MarshalByRefObject but I do not even know the assembly fullname unless I load it first, which then locks the file. I have tried loading from a byte array of the assembly. This means that the file is not locked but a copy of it remains in the current appdomain. This will become problematic over the following months / years![code]
AppDomain.Unload Does Not Free Up The Used Memory
Oct 23, 2011I'm kinda new here, and I didn't know what forum to put this in, so I just put it here. I wanted to load an assembly to an Application Domain, use it, then unload it when I'm done with it. The assembly uses too much memory. The problem is: After I unloaded the assembly, the memory used is not getting freed. I was watching the performance all the time. The available memory increases only after I close the whole application. And that assembly is the only thing that uses a lot of memory in my application. Here's the code I used to load and unload the assembly: How can I free up the memory without closing my application. The memory was suppose to get freed up by simply unloading the assembly that uses it much.
View 2 RepliesLoad/Unload Windows Drivers?
Jun 23, 2010Followup to a previous post: It's been determined that Windows Device Drivers cannot be written in VB.NET; that's being dealt with separately.
What I'm interested to know here is if there's a DotNET Framework facility for adding/removing/managing device drivers; for example, can I build a VB.NET application to list loaded drivers, or drivers attached to a specific device, then load or unload those drivers as needed? It never hurts to try. In a worst case scenario, you'll learn from it.
Winforms - Unload All Open Forms ?
Feb 26, 2009In the middle of converting VB6 code to VB.NET, I need to replace the following code that intends to close all open forms remaining in the application.
'close all sub forms
For i = My.Application.OpenForms.Count - 1 To 1 Step -1[code].....
I've replaced the Unload function with Close (as indicated by TFM), but the compiler complains that OpenForms is not a member of My.Application.Where can I access the open forms?
Unload/Force Delete Dll File On Exit?
Nov 23, 2009Im trying to delete a file on closing a form, but am unable, as the file is still in use.
Private Sub Main_Unload(ByVal Cancel As Integer)
If System.IO.File.Exists("Mydll.dll") = True Then
System.IO.File.Delete("Mydll.dll")
End If
Is there a way to unload this dll file or force a delete as the file is no longer needed when the program is closed.
Delete Or Unload Current PDF From Reader Plugin In WebBrowser?
Nov 25, 2009Background: I am creating PDF with PrinceXML.I want to adjust the tracking on a paragraph in the PDF. So I select a unique piece of text, match it in the starting document, add a tracking attribute to the text, and re-create the PDF using PrinceXML.I have to delete the current PDF in order to create the revised PDF.When I was using the AxAcroPDF1 control in VB.NET all I needed to do was
1) If File.Exists(sPDFoutputName) Then File.Delete(sPDFoutputName)
Now I am trying to do the same thing but instead of using the AxAcroPDF control I am trying to do it with WebBrowser [Why am I doing this? Adobe places a burden on the developer to maintain a list of who has the program (Reader) to comply with US export law. This is an unacceptable requirement for the program.]
2)WebBrowser1.Navigate(sPDFoutputName + "#" + sPDFargument)
I want to jump to the same page that I was on so set the page to open in the sPDFarguement variable.Now when my program tries to delete as in #1 above I get error message that file is locked/in use.Question: How do I unload/close/unlock file in the webbrowser so I can delete it?The closest idea that I have found that almost works is to copy the xxxPDF to another file: displayPDF and only display the latter.With this I can delete and recreate a new xxxPDF. The problem again hits me when I try to delete the displayPDF. I have also tried to navigate to a dummyPDF but still displayPDF remains locked.
Deployment :: Updating Dlls (unload And Load At Runtime)?
Apr 23, 2012Not sure if this is the correct place for this postWhat I am trying to do is update dll's in my application.Using VB with dotnet 2 (Visual Studio 2010)The Project has a number of Dll's one of each department i.e. Sales is sales.dll... Development is development.dll etc....Each dll has classes/User controls which is used and dispose depending on the section within the application.Once work has been completed with a dll, it put in the deployment area, currently another is program launching checks the file verison and updates as required, before the main application lauches, this works. The exe hasn't needed updated for a long time as all the changes are in the dlls.
What i have been looking at is update method for the dll's dymanically, when not in use, when the dll called into use or disposed of.I have looking at LoadLibrary/FreeLibrary and application.domain. I have been reading loads and tried out some of the examples, with a modified to suit. I am just not getting it.
Load And Unload Forms With Visual Studio 2005
Jun 27, 2009I'm just wondering, what is the best way to load and unload forms with visual studio 2005. In VB6, I used to use the following at a button click, for example.
[Code]...
VS 2010 : Creating New AppDomain To Load/unload Plugin Dll's?
Dec 29, 2011I'm in the process of trying to create a new appdomain to load plugin dll's, then unload the new appdomain so I can update the plugin dll's without having to exit the main application. There are many, many examples out there and it looks like it should be fairly straightforward, however I'm having a problem where the main application is loading the plugin dll's along with the new appdomain. Of course this is a problem because I cannot overwrite the plugin dll's if they live in the main appdomain. Based on the examples I've seen the code below should only load the plugin dll into the new appdomain, however for some reason it also loads into the main appdomain.
Dim oDomain As AppDomain = Nothing
Dim oSetup As New System.AppDomainSetup()
With oSetup
[code]....
The IDPAPlugin interface is in a seperate project that both the plugin dll and the main application reference.
UNLOAD An Assembly That Was Loaded By Using System.Reflection.Assemblie.Load Method?
Jan 15, 2007Our company has an app that load their components by System.Reflection.Load (By the way, an awesome technique )But, we start to monitorate the application and detect a extrange grow up of memory (actually when our application still all day on air, their allocate memory on task manager is 200 MB plus memory) And all of our components (60 plus DLLs) is load by this technique.My doubt is how to deallocate this assemblies or how the best way to deallocate any assemblies loaded by the System.Reflection.Assemblie.Load method?
View 10 Replies