I'm trying to create a process in SUSPENDED mode. I've gotten two errors I just can't figure out. The one I'm getting now is "PinvokeStackInbalance'."
Public Const CREATE_SUSPENDED As UInteger = &H4
Private Declare Function CreateProcess Lib "kernel32" _
Alias "CreateProcessA" _
(ByVal lpApplicationName As String, _
[code]....
What is the real mode , protected mode , supervisor mode and the hypervisor mode ?
View 1 RepliesStart a process in silent mode?
View 2 RepliesI want to create an application that can run in both GUI and CLI mode. Basically what I want is when a user double clicks an EXE they get the GUI but when they run it through a command prompt they can supply CLI arguments and run entirely in the command prompt. I know that VBScript has the difference between Wscript and Cscript, but I don't know how to do that in VB.
View 8 RepliesSometime ago I used to create all my class structures in vision before I wrote them. That however didn't last. I found it easier to just make little drawings with pencil and piece of paper. And I still do to this day. In code usually those drawings manifest themselves as interfaces which then are implemented by different classes. I do all this in code. And I was just wondering if there is any tools available in Visual Studio for VB.NET that would allow to create interfaces and implement them in classes (which a lot of times means just adding variables to class that will hold data passed with interface attributes) from design mode(kinda like using Visio only after you finish you don't have to write out code).
View 3 RepliesI have successfully create a user name = 'root' and host = '127 .0.0.1 ', use the mysql command (client mode) as follow: sql = String.Format("CREATE USER '{0}'@'{1}' IDENTIFIED BY '{2}'; GRANT ALL PRIVILEGES ON *.* TO '{0}'@'{1}' IDENTIFIED BY '{2}' WITH GRANT OPTION;", userName, serverHost, userPassword) When the script above I change it to store procedure (server mode) as below, I found the error as follows: (Error 1064 - You have an error in your SQL syntax; check the manual That corresponds to Yout MySQL server version for the right syntax to use near 'pass' at line 1)
[Code]....
I'm wondering if there is any code that I could use in VB.net so it can determine the computer's startup mode (such as safe mode or safe mode with networking).
View 1 Repliesi am using visual studio 2005 on win 7 with office 2007. i have developed win application. i am using microsoft activex spreadsheet component in my program. so it automatically creates reference to AxInterop.OWC11.dll When i run program in debug mode (open program and click RUN in toolbar it works) but if i run directly .exe (go to bin elease doubleclick .exe) it give error at loading point of that component. It says "Attempted to read or write protected memory. This is often an indication that other memory has been corrupted." An unhandled exception occurrs.
[Code]...
I work for a shop that maintains a fairly new app. The app still has its fair share of bugs, with numerous tickets coming in daily. The error information we're given with those tickets is not as useful as it might be because the application was compiled in Release mode, which I read is smaller and faster (makes sense).
Are there any ramifications to deploying a .NET application to production that was compiled in Debug mode? I would expect it would be a bit slower, but I've read the difference is nominal. This would assure us that when we get errors on tickets we have line number associated with those errors and this, of course, makes debugging much easier. major red flags that would prevent you from doing this? I'm tasked with researching the possibility.
This is applicable to C# and VB.Net. I am writing a console application, but one aspect of it I want to make representable in a GUI (that being downloads running, with progress bars). is it possible to write a console mode application that can also have a form in it that can be called from code inside the console component?
View 3 RepliesWhen you INHERIT from TabControl to create a different version of the TabControl, then BUILD the designer will add 2 TabPagesby default when you add your new TabControl from the ToolBox to a Form.
View 1 RepliesI have written a windows service that is meant to launch a notepad when a specific action happens. The problem i have is that even though the service launches notepad, the actual notepad it self is NOT visible. I know that it has been launced because i can see the process in the task manager. By the way the process is listed as a SYSTEM process rather than a process under my user name (i believe that is because my process is a "LocalSystem" one).
View 4 Replieshow to create an event which runs when a proccess finishes.
First, the program launches a batch file, so in the task manager, it appears as "CMD.EXE".
So, the event goes on when the CMD is over.
I'm not sure about what code should I use to do so.
I'm using System.Management to start a process on a remote target via WMI like this:
InputParameters("CommandLine") = "executable here"
OutputParameters = ManagementClass.InvokeMethod("Create", InputParameters, Nothing)
This kicks off the process and my code continues to run, but I need a way of monitoring that process and not doing anything else until it finishes. Is there a simple solution? I'm hoping there's something similar to Process.WaitForExit like there is when creating a local process.
In Windows 7 if I launch Task Manager and select a process (eg:Notepad.exe) I can right click on this and select "Create Dump File".
This creates a dump of the file to my hard drive.I would like to do this programmatically.
what is the method to tell when a user starts or stops a process? My company makes a software package that allows a tie in from vb. I want to make a package to allow me to start and stop the software remotely and to monitor when the software is running or not.Ideally there would be some sort of event in windows when the user starts or stops the software. I imagine there is some sort of way to do this with a timer, but I am sure that windows will have some sort of event process when the program starts. I have googled this and looked through the xtremevbtalk forums for this but I am not quite sure as to what keywords to use.
View 3 RepliesI am trying to create an application that will make calls to an API. I want this process to be fully automated to run a few times a day. What kind of application in vb.net can be automated? I've created windows applications in the past, but never automated anything.
View 8 Replies[code]..
How would you skip the process so the file is automatically created??
I'm updating an old process that already exists, which works as follows:The user submits a form which runs the following asp (simplified, names changed):
[Code]...
Each year I have to create 1099s from a legacy system. So in the past I had Foxpro code that ran out of a directory near where the Foxpro dataware house was. In 2009 we moved to SQL so I have to convert the code to VB and SQL
But I need to still store the text files and the report and I wanted to save settings in this "working directory"
[Code]....
Does this seem like the propery way to do this?
Finding documentation on XML is really difficult, because there is so much yet all of the examples seem to do it a different way.
I thought I postet this yesterday but I can't find my thread so if this is a duplicate please point me at the original one. Background: I need to create a user account and Modify it's registry before the user logs on the first time. Creating the account is done by using the Winnt provider (works great). To create the profile I'm trying to use Process.start to launch a process as the newly created user. With the use of loaduserprofile property the users profile gets created and i can do my regwrites without problem.
[Code]...
I want my vb.net dll to get the data sent from c++ project(exe).Can any body help on in what form this void pointer can be sent via pipe. The void pointer corresponds to enums or structures. I have to get this structures/enums on the vb.net dll end. I have mentioned about using pipe. My question is as what type the pointed to data can be send over the pipe so that I can easily handle the received data at the vb.net dll end.
View 1 Repliesi am trying to write a little program that checks for a process and kills is.here is the
Dim p As Process = Process.GetProcessesByName("Cheat Engine")(0)
p.CloseMainWindow()[code]...
My problem is it�s woking ,yes if the programm ,,Cheat Engine" is running the process is getting killed.But if the program is not running my program crashes.
I'm executing a remote process using WMI and would like to redirect the StandardOutput of that process back to my program. I have found these code examples:
[Code]...
I am getting an error with this code.
The process cannot access the file 'C:UsersdavidDesktopTest Folderdavid 2.xml' because it is being used by another process.
how do i end the prosess after I create the file? Or am I creating it in the wrong manner.The underlined line is where the error ocures.
Public Sub AddDTData(ByVal value1 As String, ByVal value2 As String, ByVal filename As String)
dtUser.Rows.Add(value1, value2, Now.Date)
If My.Computer.FileSystem.FileExists(filename) Then
[code]....
How to get full path of current directory of process from where process starts Like if i use my software to start somefile then I want my software to know where she started it from ( files path) What I mean is the file I opend using my softwares location.
View 2 RepliesMy app starts an On-Screen Keyboard process like this:
Dim PID as System.Diagnostics.Process
:
PID = Process.Start("C:WindowsSystem32osk.exe")
:
[CODE]...
It seems to work 90% of the time. However, sometimes the PID.Kill() fails because it says the process already exited. At this point the OSK is always still there on screen. Yes, I know my code should be testing to see if the process is still running before trying to kill it, but given that the OSK is still on screen..
I have a program that starts another program after setting the regkeys basically the program continually syncs the calandar of outlook and another application.I set the regkeys than launch the c:sync.exe app. I have tried a simple process.start and launching the process as a thread and they both do the same thing: The other process starts and works as it should but my main program goes "White screen" or "not responding" until the process.start has exited.
I want the process.start to run in the background so if users click in my main app it responds and truly that they can access the context menu of my main app from the taskbar while the process.start is running.
i want a code that if a process that i picked is no match in a process list that process that i picked will start
View 4 RepliesTrying to create a button that when clicked will check to see if a certain process image is running and if that process is running give the process focus. If the process is not running then start the application.
View 9 Replies