Datagridview Cant Show Updated Data While Database Access Already Update
May 17, 2009
currently i had a program which working fine when its running in the solution explorer,but after published,problem comes.my datagridview cant show updated data while my database access already update...my datagridview only show existed data.could it be my datagrid problem?i get my data programmatically or is my INSERT command doesn't update the dataset?but in the solution explorer does show the dataset was updated. [code]
I can edit the values in the dgv cells manually, add rows, delete rows all without problem and then update the database.My problem is in one form where I want to allow the user to filter the rows in the grid and then enter a value in a textbox and programmatically update all the cells in one column with that valueI can update the rows, and see the changes in the datagridview. When I try and update the database (using UpdateQuery on the underlying TableAdapter of the datagird) only some of thechanged rows are being updated I though it might be related
I have a problem that is bugging the hell out of me..... I need to know how to update an access database from an unbound datagridview using vb.net 2008 here is my code but it dont want to work, I need the simplest way.
i have access database. its data is laoded to datagridview in vb.net langauge. i want to edit some data in the datagridview and this edit should be save in the database too when i press button edit. i used this code but it is edit for only one time and if i do any action before it it will not work.
Dim ConnString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:UsersHaidarDesktopcustomer listNewFarahnetFarahnetCustomers.mdb" Dim SQLString As String = "SELECT * FROM customers ORDER BY Fname ASC" private da As OleDbDataAdapter
I have been scouring these forums and the internet in general as well as doing a lot of reading, all to no avail. I can not seem to successfully update the Access database from an edited DataGridView. I am trying to use Stored Procedures that are in the Access database and work fine therein. The DGV is filled in properly. I have tried an ever-increasing number of variants to update the database (Private Sub BtnUpdate...) without success. [cod]e....
I got a problem in showing report. The system flows like below -Systems insert records in CSV file into a table,A in ms access database by batch.Systems update in another table, B, based on these inserted records.
This program is very difficult for me, but I must get threw it or I cannot finish... What I am doing is making a Database of foreign Languages with the spelling of the words and the pronounciation inside the database... The USER enters a paragraph of words into the translator textbox and pushed translate. The program has a DATABANK of words with the phonetic spellings and matches the word, then translates to phonetics. The problem is that new words keep appearing inside the language. So I incorporated a Database of 2 fields
I have a datagridview and each time i enter values in database the values are not reflected in the datagrid untill i load the form again.I want a method tat updates the datagridview without reloading the form.M using Microsoft Access 2003 database.
I want to update data into an access database containing three fields of text type. so in the design i added three text box and one button.........on button click the data corresponding to textbox3 will be updated by textbox1 and textbox2. then i coded it as follows:
Imports System.Data Imports System.Data.OleDb Public Class Form1 Dim con As OleDbConnection
[Code].....
It is running and executing good........But finally the data in the database is not updated.........Hence i say the above code does not work......
My datagridview is displaying records from table in database.When I go to add a new record the 'pencil' icon does not appear so when I click on save button update to database table does not take place.code behind save button is
I'm trying to write my first application which connects to an Access db. It took me hours to understand this, but I figured out that, if during the creation of the connection I chose to copy the mdb file in my project directory (VB asks this), I get that the database is not updated. Everything works, except the save button which saves new rows in the db. If I answer no, and the original mdb file is used, the database is correctly updated as expected. Is there a reason for this? Why is this happening? Shouldn't the database bu updated anyway?
I am using Datagridview to show some table data from database. It is working but its appearance is not what i am looking for.Is there a way to edit columns and rows manually ?This is a list of what i want to do :
1. First of all i want to change column captions. because they are like "Fld_name" etc.
2. There is a column that shows date. I want to write a code for it ( convert date type )
3. I want to add a button at the end of each row and write a code for it ( show detail about that record )
I'm actually making a library system and I'm having problems with my data not saving in the database. It does appear in the DataGrid but after I close the application and check the database, nothing's there. [URL]
Here's the code.
Imports System.Data.OleDb Imports System.Object Public Class AddBook
I am getting an incorrect repsonse after an update to a table. In my RowUpdating event I have the following code which builds an Update Parameter to call an SP to update a table. I must be doing something wrong but everything runs fine. My rowsAffected variable reports 1 after the update, but the table never gets the data.[code]I found a solution that is working. On the original DataSource for the update command I needed to add the following.[code]This in essence allows the original data source to call the SP. Note: that the command type needs to stay as TEXT not Stored Procedure as one might think.
I have a datagridview bound to bindingsource. Whenever I delete a row, it is not updated to the underlying database table. I have to click elsewhere in the form to cause the dgv_rowValidated to fire where I have the following code in there to push changes to the database:
bs,EndEdit Dim cb As New SqlCommandBuilder(myDataAdapter) myDataAdapter.Update(myDataSet)
Normally, where do I place such code for updating when comes to deleting a row in datagridview? I noticed userDeletedRow event does not fired when I am deleting the last row in a one row datagridview.
i have a basic form in vb using .net framework 3.5,when the save button is clicked, it should update the data from the form to the access 2007 database,however, the whole thing runs up to the point in bold,
here it says that "The ConnectionString property has not been initialized" Private Sub Holiday_BookingBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Holiday_BookingBindingNavigatorSaveItem.Click
I am populating a datagridview not with a datatable but with a list of instances of a class I created. The data for the instances is read from a database.
Looks like this:
Public Function GetSecurities() As System.Collections.Generic.List(Of Security) Dim com As New SqlCommand Dim rdr As SqlDataReader
I have a DataTable that's constantly being updated with new data from my database via a timer. That data is eventually reformatted and displayed in a DataGridView control.In an effort to prevent the DataGridView from completely refreshing from re-databinding (thus, clearing out selections, resetting scrollbars, defaulting sorting settings, and making the gridview flash as it reupdates), I'm simply removing old rows from the datagrid that no longer exist in the DataTable, and adding new rows to the datagrid that appear in the DataTable since the last update.
For the sake of simplicity, we'll call DataGridView the LEFT table, and DataTable the RIGHT table I'm looking for a way to go through both tables (LEFT and RIGHT), and remove old rows that are no longer in RIGHT and delete them from LEFT. And look for new items in RIGHT and add them to LEFT. Each table has a column called "RecID" containing a unique id for each entry that can be used for comparison. is there a way to do this all in one loop? What I'm looking for, in pseudo code:
<loop through everything> if RecID does not exist in LEFT but exists in RIGHT add new item to LEFT if RecID does exist in LEFT but does not exist in RIGHT
I have an Access database that is updated directly in Access. I'm trying to write a program to 'monitor' the database, and have a DataGridView control showing the contents. When the program is first started, it shows the current data in the DB fine, however, I've been unable to get it to refresh with any updated data from the mdb file. I have a timer running on 5 second intervals, and if i clear the dataset, the DataGridView refreshes to empty.
I have a datagridview on a form , and I just want to take this data and save in access database, if I enter a direct value in this code , it works but it does not take a value from datagrid,I am work on this from last two daysIt throws an error saying that parameter userid has no valueError I believe is at DV.Rows(0).Cells(0).Value I think it cannot get value from Datagridview
Private Sub btnupdate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnupdate.Click Dim ds As New DataSet
I am doing project now.i am a beginner for vb.net. I display data from ms access database to datagridview.Now i want add Button in Datagridview in one coloumn and when i click the button it will display the particular record and i want to display the diagram for that data. I am using filter.but it doesn't work.my code is
I have made DataGridView in the designers and connected an Access database to the datagridvies and the Column headers appear as they should and when I check in preview mode all the fields are correctly populated. However, the DataGrid is not populated in normal mode at all. I have been trying to run the project but nothing is happening. What can I do to populate the field.
I am struggling to understand fully, I need to bind data from an access database to a datagridview. (the DB simply holds a list of product with their stock code, description etc) I need to bind this datagridview to a products collection without using a dataset to bind to the datagridview. I really don't understand this fully.
