Decimal Numbers Round Up Or Down To The Nearest Integer?
May 13, 2009How can I make it so that decimal numbers round up or down to the nearest integer?
View 3 RepliesHow can I make it so that decimal numbers round up or down to the nearest integer?
View 3 RepliesI'm creating a maths program and when it comes to division it's giving me .34216 as answeres which isn't what I want.I was thinking declaring the textbox the answer appears in as a single.It's not working out though and it's still using decimal points.I was told by my teacher to declare it as an integer so I tried that too, it's not working out also. I figured based on the code, I would be declaring array3() as the single or integer since that's the textbox the answer will be output into. [code]
View 2 RepliesHow would I go about rounding up decimal numbers to the nearest 2 decimal places? For example $7.0000032 would be $7.01 In theory, VB would make it $7.00 but if it is > $7.00, I want it to reflect that to the nearest penny... so $3.0000001 would be $3.01
View 5 Replieshow to round up a decimal numbers.. 5.63 = 6.00, 5.43 = 5.00
Montana medical marijuana dispensary
intLoginTime = txtLoginTime.Text
intLogoutTime = txtLogoutTime.Text
[CODE]..........
The problem is that the numbers seem to round after the decimal point, so if I entered a login-time of 8.15 and log-out 9.30, instead of showing 1.15 as the difference, it shows '1'. is there a way around this?
With the following problem which I want to round up the "TotalVolume" and "AvgHL" with 2 decimal places. However, my ListView2 is still showing as the following example.
Example:
ID --------- Average H/L ----------- Average Volume
12 --------- 1.230000 ----------- 4251.230000
17 --------- 0.560000 --------- 12345.560000
23 --------- 0.320000 --------- 2345.010000
54 --------- 1.230000 --------- 122.550000
Dim conn As SqlConnection
conn = New SqlConnection(Source)
conn.Open()
[CODE]...
getting a formula round off to the next highest .25.example:
2.35->2.50
2.26->2.50
2.24->2.25
2.51->2.75
I can't use the Round function because if I have 2.26 then it will round off to 2.25 which is unacceptable.I have been using the Ceiling function but it rounds it off to the nearest highest integer. Which can add an almost extra kg,lb to my formulas.
how can i always round a double up?
2.3 = 3
2.5 = 3
2.8 = 3
i always want to round up to the nearest whole number
Is there any prebuilt items to roundup a number to set fraction size or do I need to build a routine to do this? If I have to build this any thoughts on the way to go about it? I was thinking I need to strip the decimal places and then compare them to a dataset of numbers a make a choice?
View 3 RepliesDecimal number in my textbox I need to round to the nearest even number. Is there any idea how to do it?
View 21 RepliesI am taking data from a datagridview and storing it in an Access 2007 DB table
using the Datatset/TableAdapter Update command.
'Add rows to Table'
FoodDatabaseDataSet.Meals.Rows.InsertAt(DR, MealsRwCnt)
'Update Data Base'
[Code]...
I'm trying to find a way to force my calculations to round up currency values to the nearest whole pence/cent.By default, rounding will round to the nearest pence/cent, whether this is up or down.I need it to always round up regardless.[code]My client's back office system rounds in this manner which is rather peculiar to say the least, however the prices on his website need to match and to to this they need to be rounded up.The built in ASP.NET Math.Round function only offers the regular rounding(and banker's rounding) and not an option to force rounding up or down.
View 3 RepliesI am working in excel trying to setup a function involving multiplying a cell by a set number and then having the result round to the nearest 10. Here's the beginning of my function statement fx=e3*1.026. say the result is 8654, I need it to round to 8650. Also if it comes back 8655, I need it to round to 8660. I have about 2,000 records I need to do this to so I was hoping that one formula or statement could be used for all my data.
View 2 RepliesI have read about Round() and MidpointRounding.ToEven but I still could not figure how to use it to achieve what I want. I have numbers (usually from 5 digit decimal) such 125.36 , 125.10, 125.99. I want to make the 2 decimal point rounded to the nearest 20. Means, the 2 decimal point should be either .00 or .20 or 0.40 or .60 or 0.80 only.
125.36 should be 125.40 : 125.10 should be 125.00, 125.99 should be 126.00
125.54 should be 125.60 and so on
Is there math function to make or I should parse the number as text and test the last 2 digit?
I was using this old method of creating a bunch of rectangles when I need to get the location of a certain point within a grid so I could draw images on the grid. The thing is, I don't want to use rectangles, I want to be able to just round the location as if I were using rectangles. I need it to be able to round the point (66,70) to (50,50) so if you can imagine a grid and the mouse position being within that square in the grid, I need to get the location of the upper left corner of that square.
View 5 Repliesi'm building an image library and one of the things i want to do is compare the most common color in a given image to a set of established colors in rgb format the way i'll probably do this is create 3 arrays for the average r,g and b of each given image, and then compare them to my established values for r,g and b that i want to match to so if my first image has the average values of 255, 125 and 5 for r,g and b..what would be the best way to do a nearest match against my pre-established colors? (about 32 in total)
View 1 RepliesI have a program that will round any numbers I give it regardless of the data type I set (I've tried double and decimal) before it saves into the DB. I'm using MS access for the DB and I've set the data types in access to Numeric Double, Numeric Decimal, and Currency and all with decimal places set to 4 -- all to no avail.
What I do know:
1) The textboxes on the form accept the number value as I enter it and after I hit save the value displayed is the same as the number that I entered. However, once I query the database again for that entry the value has been rounded up/down to the nearest integer (whole number). For example: I enter 1000.50 and hit save. I search for that same entry and the value is saved as 1000. If I enter 1000.51 and hit save then search for the entry it shows the value saved as 1001.
2) I can store the desired value directly into the DB by manually entering it. When I search for that entry from within the program it displays the correct amount. HOWEVER, if I try to change the amount and then hit save I get a concurrency violation.
I think that it may be a setting somewhere in the program that doesn't allow for decimal places but I've search everywhere and I cant find anything.
I'm trying to get my decimals to display with four decimal places. The DB rounds my number to 4 decimal places, but it returns the number with trailing 0s (due to the decimal precision of the field), so something like 9.45670000.[code]...
How do I format my decimal, so that the number of decimal places is always four?
I have a double value like 3768.595863. if i round this value then i will get 3768.596 but i want 3768.595.how can i get that?please reply.
View 7 Repliesis it possible to round a double to a certain number of decimal places
View 1 RepliesI'm using ROUND() to calculate the value in one column from values in the others and it displays to a lot of decimal place.Its rounded correctly to 1 decimal place but when shown the the datagridview it displays like 12.3000000000..All 3 values used to calculate this one are stored to two decimal place, not that that should matter.[code]
View 3 RepliesAlso how would I format totalCost (a string) to round to two decimal places?
lblTotalCost.Text = "The cost of your journey for " + sumNoTickets + " people, is: + totalCost
I need a function which will Round a number UP to the specified decimal precision, exactly the same as how Excel's RoundUp function works:
Roundup(dblVal, intDecPlaces)
So I need the following:
Roundup(0.896523, 4)
would return
0.8966
However, everything i've tried/found simply rounds to the nearest whole integer, or returns a normal rounded value, hence the above would return
0.8965
I've tried the following:
Math.Round(dblval, intPrecision, midpointrounding.awayfromzero)
' and
Math.Round(dblval, intPrecision, midpointrounding.toeven)
And even custom functions, such as:
Public Function RoundUp(ByVal varValue As Object, _
ByVal iNum As Integer) As Double
'ignore the data types here, I was playing to see 'if changing any of the data types would swing 'the results (knowing full well they wouldnt make 'a difference, thats how fed up with this I am!)
Dim lNum As Long, xVal As Double, xVar As Object
xVar = Fix(varValue)
[CODE]...
I've even looked at converting this to a string, looking at the Xth decimal place, and incrementing it up by 1, then converting it back to a double, while this works (sort of) it seems to be a very roughshod way of doing it, and I'd rather do it mathematically than with lots of data conversion.
How could i round an integer number based on the last digit of the number?
For example:
Dim x As Integer = 12
Dim y As Integer = 139
Dim z As Integer = 2322
[Code].......
In class the teacher mentioned that textboxes return string. If I am asking you to tell me how many hours did you work, and if you say 2.5 I would like to have the integer 3 stored, because I have to pay you for any fraction of an hour as a whole hour.
I remember seeing someplace that it would be changed into a double and then take the ceiling of that double and then change it into an integer.
Something like intHouresWorked = cint(celing(cdouble(textbox.text)))
will that work, or am I missing something?
I want to round the figure. Suppose if i have 818.98 then i want to display 819.8 or suppose if the digit after decimal is greater than 5 it round the digit.I use the following methods;value.toString("N2") or value.toString("#.00") or Math .round(value,2) but not sucessful.
View 6 RepliesI have an id called "AM01". I separated them by truncating the numbers out and increase it by 1 each time I want to add a new record. Therefore before I add the record, I would have to combine them back. I managed to truncate them and combine them back. However, the results turn out to be "AM2" instead of "AM02". So, is there a way where I could make the numbers as "02" instead of just "2"?
View 6 RepliesCurrently using VS2008, VB.NET, SQL.
I have a FormView from a Data Source that is getting some fields that are stored as Decimals in the SQL Database.
I am grabbing the field from the FormView as such:
Dim AvgTicketL As Label = CType(frmMerchantProfile.FindControl("F10Label"), Label)
I need to take this value, and convert it to an Integer, then send it along to an API. I have the API Calls done, tested and working, but I'm getting an error as when it is getting this value, the API is returning "Must be an Integer" error.
What I have tried so far:
Dim AvgTicketL As Label = CType(frmMerchantProfile.FindControl("F10Label"), Label)
Dim AvgTicket1 As Integer
AvgTicket1 = Double.Parse(AvgTicket.Text)
Do something with AvgTicket1
I have also attempted to Round the Value, then convert it and call it - no luck.
Checking the value of AvgTicket1 (Writing it out to a Label or Response.Write) shows "100", where the database value was 100.00. But the API is still getting 100.00, apparently. Any other conversion method that I've attempted states errors that the Label cannot be converted to Integer.
What are some methods I can successfully convert this value to an integer from a label?
So, yes, I've tried with these three formats, and the problem remains the same:I have a string, "s"For Each s As String In stringarray and this array is recieving data from a streamreader that is reading a csv file. The data I'm having dificulty reading are these very specific numbers(yes, only these numbers, because phone numbers get home safe and sound).The numbers I'm talking about are usually decimal.ValueList.Add(Convert.ToDecimal(s))
Now, when I convert them like that, they always bring a "D" alongside with them. I've personally checked the string multiple times, and it just has a "1", and somehow, my list recieves "1D" as a number, same thing happens with decimal numbers(0.29D for example). I've tried with Doubles and Integers, the result is the same.
I am new to vb and need some help with this change program. The idea is that we are given a certain amoun of change and then telling how many dollars, quarters, dimes, nickles and pennies. I thought I would convert the decimal to an integer and then use a while loop for every text box, i.e. dollars, quarters, dimes, etc.., to show how many of each, but the while loop is confusing for me in vb, but to tell you the truth I don't know if I am on the right track,
[Code]...