I have a unit-test for my entire solution(over all 300 methods) and this unit-test will run daily. Here is what my unit-test does,Suppose we have Insert method which inserts a data through Store procedure into Sql server 2005 table. The unit-test for this insert method is,first i will run a query(dynamically) which gets all required data for insert method(in other words it will get data from same table and does inserts, this is purely to test the method) and my problem here is if the table does not have data at all then my unit-test fails.
Since I'm doing select dynamically and then inserts, this happens when I run my unit-test in different environmental like Quality Assurance and performance Assurance. So I'm looking for a solution to avoid unit-test failure becz of nodata.. I'm looking for solution where I do some think like this if I get an error message say no data. Then I get data from different environment(like development data base then do insert into the table and run the unit-test).
I have a UserControl that has a simple repeater inside. It has a property called data which when passed into the control populates the repeater using the standard databinding.
On a page I have a placeholder.
I have a loop which does the following
Dim qDetail As New UserControls_ReportDataTable qDetail = DirectCast(LoadControl("~/UserControls/ReportDataTable.ascx"), UserControls_ReportDataTable)
I have a created a user control. This user control I dynamically load on a page inside Telerik Panelbar control. I have done all necessary coding to save the viewstate and load this dynamically created usercontrol every time page loads.On this User control I have a asp panel. By default this panel is invisible. When user clicks a button on this user control panel is made visible. On page load of this user control I populate all the controls on this panel.Everything works fine if I dont load this use control dynamically but when I load this user control dynamically and if I make panel visible by default then only all fields on the panel are populated. But if I make by default invisible and on button click make panel visible none of the text boxes or comboboxes are populated. I populate comboboxes on page load of the userControl but inbetween postbacks all the comboboxes on the user control loose data.[code]...
To detect 'death of player' I am using the mouseleave event of my picturebox background (background1). Unfortunately this triggers both when the mouse enters an 'evil' and the 'points' and ends the game without the player being able to collect points.
The obvious way to solve this would be to swap detection to entering evils.
Unfortunately I am dynamically creating my 'evils' and do not know how to also dynamically create subs to deal with MouseEnter. Here is my code for generating the 'evils'
'The number of evils (asteroids) Dim evilcount As Integer 'A count for use with comparison to evilcount
I would like to generate the checkbox list dynamically.For example against the list of employees(rowwise), provide the list of check box options (columnwise), the selected items will be stored in the database against the each employee. Since i am the new to .NET your guidance will help me to complete the task.
I'm writing a scheduling program that queries a MySQL database for today's appointments and uses a Table Layout Panel with employees on the top and times on the left to display the schedule. I am trying to add another table ontop of that table for each appointment and set the rowspan of that dynamic table to occupy the time slot of that appointment from start to finish.ll the appointments appear in the dynamic table and each dynamic table appears in the appropriate starting positions in the main table. When you are designing GUI's and put a Table within a table, you get a RowSpan and ColumnSpan option for that inner table. The problem I'm having is the dynamic tables are not giving me a RowSpan option, which I believe is because it was created using code and doesn't know that it's inside another table.Here is part of the code... This code is inside loops for each appointment of each employee
I use in java JTable looks like a excell sheet create columns and rows and enter data in it.In vb 2008 what control i can use, I think table control layout not supported to data entry it supports control to in it and then add data .
how can i control Data Entry in 3 different table with BeginTranaction / Commit /Rollback in vb.net 2008. i am using sql server 2000 at back end and used SqlClient,SqlConnection, ExecNonQuery method.
Resources: Visual Studio 2008 Pro (currently in 90 days trial) Platform: OS - Vista Home Prem 64-Bit Language : Visual Basic
I'd like to bind my textbox into two (column)from different table is it possible to do this? I already know how to bind (one-to-one) controls and table.
I am currently building a tool which uses access as the backend and excel as the user interface (I am unable to change the applications).I would like to be able to use the listview option, howver I haven't a clue and searching on the internet is causing me a headache.
Basically what I would like to do is get the heading names from the table in access and populate the listview, later on I will what it to look at specifc data to populate the list view.
My connections is already open, I think I'm ok witht he sql, its just the other bits.
can dot net generate class from database table ? means if i have a 1 table & want to create class for 1 table like insert, update, delete functions & properties(for table columns)
I need to grab some data from a webpage but for me the main problem is I can't grab the data the way I want. I want to grab the data in a listview control but my code is fetching all data within any span tag (span class "inputFieldLabel" which is not required) in a single column of a listview control. I am giving the format (source) of the webpage below and my coding in vb.net (2008),
<br> <span class="inputFieldLabel">Following Are ...</span> <span class="inputFieldLabel">01/02/2011</span> <span class="inputFieldLabel">And</span>
I'm trying to generate a pivot table in Excel using VB.NET 2008. I need to bring the data into one tab, and then generate a Pivot on another (i can't do this externally because the data is pulled from a bunch of different places). Currently I'm doing this pivot in the actual code, and then writing to Excel, but it takes up a lot of resource and time and this will make things much easier! I created a sample list below, and I am trying to generate a sample pivot table based on it, but I'm getting errors:
Dim wb As Excel.Workbook Public Sub ExcelGen() Dim ex As New Excel.Application
[code]....
The error I'm getting right now is the no object reference set error on the "pCat =" line...
I'm trying to add rows dynamically to a System.Web.UI.WebControls.Table control in ASP.NET. I found some sample code that does what I'm seeking, but it only adds a single row. It seems like the table row count does not carry from one page load to the next. The user should be able to add as many rows as desired, and I need to capture the data from each row.
What am I missing? Code below.
<%@ Page Language="VB" %> <script runat="server"> Sub btnAddEmail_Click(ByVal Sender As Object, ByVal e As EventArgs) Dim tr As New TableRow Dim tcLabel As New TableCell
I have an error panel that is subbed in to a page if an error goes wrong to gracefully handle and display errors.Currently, I am just appending the error messages to a string and pushing that to a label. If you have multiple errors, this gets messy.I'd like to push each error to a list item in a bulleted, unordered list.How can I dynamically generate, from a vb codebehind file, new list items inside of an undordered list element?
I'm developing a policy administration system and I need to generate a unique policy in this formart
RP000000/HH
Where R is the Region i select from a Combobox, P is the product the client chooses and the auto generated six digit number and HH is the hour when the record was entered in the system. I want the auto generated number to be the ID in my ClientDetails table in my DB.Here is my code of what I have done so far.They want to be able to tell the region and the product by just looking at the policy number.
Private Function PolicyNumber(ByVal intRegion As Int16, ByVal intProductCover As Int16) As String PolicyNumber = intRegion.ToString & intProductCover.ToString & "000000" & "/" & Hour(Now).ToString End Function
I currently have this code to create an asp table [code]where PH is my placeholder for the table to appear in.This code creates a 1 celled table how do i get it to create multiple rows and cells?
Is it possible to dynaically create table name in MS Access: Below is my CODE: strSQL = "CREATE TABLE" + Me.Text + "( ID Counter," & _ "Name TEXT(50) NOT NULL," & _ "PRIMARY KEY(ID) )" But, I am getting a run time error that syntax is wrong.
I am adding some controls to a panel at run-time. After I add them I need to loop through the panel in a different sub and test for a specific control. I was assuming that if I named the variable that the control is set to to "a", that I could then test for this by saying
I've create a new VS 2008 Window Form Project using VB. I added an oleDbDataAdapter to the first and only form, set it to a table in my Access 2007 Database (there is only one table, PK field autonum of course and two Memo fields). The Database is in the Project's folder. A standard oleDb Connection object was created, as I expected, then I select the DataAdapter and choose 'Generate Dataset' which produces a standard DataSet called 'DataSet1.xsd'. Now when I build the project I get an error 'Error 1 Type 'FontTest.DataSet1' is not defined.' I do have a reference in my new Project to System.Data.So what the @#%$@ is going on? Why isn't the Dataset create by the DataAdapter being recongized? I can get into the DataSet Designer. The DataTable create is perfect, three columns defined correctly as I expected.
Public Sub PopulateWaterRecords(ByVal dDateTo As Date) 'Populates the water record forms for each year 'Dim UserName As String = Membership.GetUser().UserName