Enter In A Code For An Overall Letter Grade From A Percentage Given?

Feb 23, 2010

How do you enter in a code for an overall letter grade from a percentage given? I have a seperate box for the letter grade and a seperate one for a the percentage grade . I have it setup when an overall grade and possible grade is entered into boxes it will give me a grade percent but not a letter grade. How is that added? I am doing this for my course project but dont undersatnd the coding very well. I am just trying to pass the class.

View 1 Replies


ADVERTISEMENT

Carver-parallel (range Code) - Allow User To Enter A Score And The Program Returns A Grade Based On The Score Entered

Apr 14, 2012

Haveing troubles with an assignment. I am writting code that will allow user to enter a score and the program returns a grade based on the score entered. I can get it to work using "IF" statements but want to use code for ranges. My "IF" code is as follows.......

[Code]....

View 2 Replies

Course Average To Letter Grade?

Mar 3, 2010

It works up to this point but when I try to add so that 70-79 is a C, 60-69 is a D, and 60 and less is a F I run in to problems.

Module Module1
Dim Average As Integer = 0
Dim Response As String = ""

[code].....

View 3 Replies

Calculate And Display Letter Grade

Nov 21, 2010

I have coded this not sure how to get it to display correctly to the lblGrade box. I have set it up for. Supposed to take the average of three grades and display the letter grade for the average of the three grades.

Here is the code
Public Class frmMain
Private Function CalculateGrade _
(ByVal txtTest1 As Decimal, ByVal txtTest2 As Decimal, _
ByVal txtTest3 As Decimal) As String
Dim AverageScore As Double
[Code] .....

View 8 Replies

Getting A Letter Grade Using Select Case?

Dec 14, 2009

I made an application that calculates course grades. The program runs perfectly except for the last part

The the final grade number comes from the label "lblCoursePts" and i want to put the letter grade in the label "lblFInalGrade" Here is what i have.

'Determine the final letter grade
Select Case lblCoursePts.Text
Case 90 To 100 : lblFinalGrade.Text = "A"

[Code]....

View 5 Replies

Letter Grade Based On Test Scores?

Nov 19, 2010

I need someone with patience and can go through a solution with me from the Clearly Visual Basic book. I'm good with computers and can usually learn things relatively fast on my own time and in my own way, but I'm going to school for computer programming and, with certain things, I learn better with things explained to me rather than reading from a book. If someone has the time to go over this solution I'm doing and explain it to me in a way I'd have a better chance of understanding, I'd be truly grateful. I need a tutor, for lack of a better word. The lab I'm doing is from the Clearly Visual Basic book and the instructions are:

Code an application that displays a letter grade based on the averages of three test scores. Code the application using a function to determine and return the letter grade. If the average is at least 90, the grade is A. If the average is at least 80 but less than 90, the grade is B. If the average is at least 70 but less than 80 the grade is C. If the average is at least 60 but less than 70, the grade is D. If the average is below 60, the grade is F.

[Code]...

View 17 Replies

Application,using A Function To Determine And Return The Letter Grade?

Jun 3, 2011

I have been struggling with my programming class from day one. I still can't seem to grasp the complete logic on how to write code. Anyhow, I have an assignment due that I am stuck on. Here is the assignment:

In this exercise, you code an application that displays a letter grade based on the average of three test scores. Open the Grade Solution (Grade Solution.sln) file, which is contained in the ClearlyVB Chapl8Grade Solution folder. Code the application,using a function to determine and return the letter grade. If the average is at least 90, the grade is A. If the average is at least 80 but less than 90, the grade is B.If the average is at least 70 but less than 80, the grade is C. Tf the average is at least
60 but less than 70, the grade is D. If the average is below 60, the grade is F.

You will be developing the code for the function on your own. Below the Public Class frmMain line, insert this function header:Private Function CalculateGrade(ByVal testScore1 As Decimal, ByVal testScore2 As Decimal, ByVal testscore3 As Decimal) As String

In the function, declare variables for the average score and the letter grade. Calculate the average, use IF/Elself statements to determine the letter grade, and return the letter grade. Create a subprocedure for the Click event for the btnDisplay button. It should call the CalculateGrade function with three arguments ( the three test scores from the text boxes), and display the returned value in the lblGrade box.

[Code]...

View 3 Replies

Declare Variables For The Average Score And The Letter Grade?

Apr 18, 2011

I am taking an online class and I am having trouble getting my solution to work. My assignment is as follows: In the function, declare variables for the average score and the letter grade. Calculate the average, use If/ElseIf statements to determine the letter grade, and return the letter grade.

Create a subprocedure for the Click event for the btnDisplay button. It should call the CalculateGrade function with three arguments (the three test scores from the text boxes), and display the returned value in the lblGrade box.I have looked all over the internet and have had no luck finding an example to look at I am taking an online class and I am having trouble getting my solution to work. My assignment is as follows:

In the function, declare variables for the average score and the letter grade. Calculate the average, use If/ElseIf statements to determine the letter grade, and return the letter grade.

[Code]...

View 7 Replies

Letter Grade - Stack Over Flow Exception Was Unhandled

Nov 11, 2009

Private Sub btnExit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnExit.Click
Me.Close()
End Sub

[CODE]...

My code will only let me typ one number into the text box and then it brings me back to the code and says "stack over flow exception was unhandled.

View 5 Replies

Using Parallel One-dimensional Arrays To Calculate A Letter Grade?

Jul 27, 2011

The exercise prior to this one had us use two parallel arrays that store a letter grade (A, B, C, D, F) and the minimum points needed for each grade. The user input the points earned by the student and the program shows their letter grade. It took a minute, but I got that one done, and it does what it's supposed to do.This exercise has us modify that exercise to ask for the (via InputBox in MainForm Load event) total points possible. The grade is then determined by percentage of the total points possible. For instance, if x is the user input, an "A" would be 90% of x.

View 4 Replies

Averaging 15 User-input Grades And Then Telling The Letter Grade

Jun 5, 2011

It is meant to average 15 user-input grades and then from there I have to provide the letter grade that corresponds with the average percent. I understand how to provide the corresponding letter grade, but I don't understand how to get the average. I've tried putting it into arraylist format

View 4 Replies

VS 2010 Storing Grades Into An Array & Output Average / Letter Grade

May 13, 2011

"I need to create a program that will allow the user to enter in 10 test grades from a class. I need to store these grades into an array, and use a loop to add up the total. Then I'll need to output the average, and the letter grade for the average using:

90 - 100 A
80 - 89 B
70 - 79 C
60 - 69 D

Below 60 F"

That's all it needs to do. Here is some code that shows you that the only thing I know how to do is (allow the user to enter in 10 test grades from a class.) The rest I'm so lost on and have a crappy instructor. This assignment is due tomorrow, but the instructor is not available over the weekend.

Here is my This is all I have:

Dim MyNumbers(9) As Integer
Dim Total As Integer
Dim i As Integer

[Code]....

View 9 Replies

In Percentage, Should Expect The User To Enter 4 For 4%?

May 24, 2010

If we format a value for percent "{0:#%}" then it will become 400%, and this also applies to all the 3rd party controls I've tried. I've used custom format as a workaround for this but perhaps you guys could enlighten me on this one. If a user inputted 4 for example then did the user intended 4% or 400%? If it were me that I would expect the 4 to be 4% rather than 400%.

View 11 Replies

Do-while Loop To Enter A Letter B/w A-Z

Oct 17, 2010

I have to write a do-while loop for class asking a user to input a letter from A-Z and it must be upper case. I am using an input box and cannot get the program to do anything when I click on the button.

View 6 Replies

Array (parallel) - Allow User To Enter A Score And The Program Returns A Grade Based On The Score Entered

Apr 14, 2012

Haveing troubles with an assignment. I am writting code that will allow user to enter a score and the program returns a grade based on the score entered. I can get it to work using "IF" statements but want to use code for ranges. My "IF" code is as follows.......

[Code]...

View 1 Replies

VS 2010 Have The Code To Display The Min And Max Grade?

Feb 1, 2010

Is there any way to have my code display the min and max grade without having to re due most of it?

View 2 Replies

VS 2008 Enter Only 7 Numbers And A Letter - Passport Number Into The Textbox

Oct 26, 2010

I have a customer form and want the customer to enter a passport number into the textbox and want to limit them to enter only 7 numbers and a letter.

View 1 Replies

Coding Hangman Program So That When Enter A Wrong Letter A Picturebox Image Would Appear Eachtime?

Jan 15, 2011

I have most of the coding done, but i don't know how to code my hangman program so that when you enter a wrong letter, a picturebox image would appear eachtime. Also i want to put a limit on the amout of guesses you can have. If possible, i would also like a listbox with the letters that you have guessed wrong stored in it.

Here is my code so far:

Imports System.IO
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

[code].....

View 4 Replies

VS 2005 Make Live Search Form Like When User Enter 1 Char Then It Ll Find All Data Start With Or Contain Letter?

Jun 19, 2009

I want to make live search form like when user enter 1 char then it ll find all data start with or contain letter.i have use the sql like query with textbox textchanged event but it is too slow any other method to make it fast?

View 4 Replies

Textbox - Every Time The Letter A Is Entered Into A Textbox - Want It To Enter In As A 1 Instead

Aug 27, 2010

OK, every time the letter a is entered into a textbox, I want it to enter in as a 1 instead. Help?

View 3 Replies

File I/O And Registry :: Binary Converter Reading String Letter By Letter

Sep 7, 2008

I have a binary converter I am attempting to build and want to read and convert the InputTextBox(alphabetical characters) letter by letter however all I have so far is one letter at a time

Image here is the code I have so far:

Code:
Public Class ConverterForm
Private Sub OpenToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenToolStripMenuItem.Click

[Code]....

View 5 Replies

VS 2008 - IndexOf - User Enters A Letter Into A Text Box, And The Output Must Make The Letter Uppercase

Jun 28, 2010

I am a vb newbie having some trouble with an assignment. A user enters a letter into a text box, and the output must make the letter uppercase and tell what position the letter is at in the sentence "The quick brown fox jumps over a lazy dog."

Here is my

Private Sub btnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmit.Click

[CODE]...............

This is what comes out: "A first occurs in position -1". Everything comes out except the position is always displayed as -1.

View 4 Replies

VS 2010 : Change Colour Of Text Letter By Letter When Typed?

Jul 5, 2011

Is it possible to change to colour of letters as they are typed.I.e

Piece of text says
"Hello World"

when user types "H". The "H" in the original would change if matched and then so on and then when "Hello" is matched it would change to another colour.

View 1 Replies

Using A Timer Control To Highlight Text Letter By Letter One Every Second

Aug 5, 2009

I'm using a timer control to highlight text letter by letter one every second. Timer1.Interval = 1000 How can I give the user access to this variable so the speed can be changed?

View 7 Replies

Cipher/ Code Generator -Program - Search Through Textbox And Find All Of A Certain Letter (say A) And Replace It

Nov 25, 2008

I'm trying to make a program (in VB 2008 Express Edition) that will take text (from a textbox) and then switch the letters (say a->f and A->F) and will put the result into a second textbox when I click a button. How do I code the program so that it will search through the textbox and find all of a certain letter (say a) and replace it, then search for the next letters (say b-z) and replace them?

View 4 Replies

Changing Text Style Letter By Letter?

Nov 4, 2011

I'm a VB beginner.I wonder if it's possible to change the text style letter by letter?I've learned here that you can change the entire style of text like

Dim myStyle As New Font(TextBox1.Font.Name, TextBox1.Font.Size, FontStyle.Regular)
TextBox1.Font = myStyle

[code].....

View 4 Replies

Checking The Code Line By Line And Found That The Code Does Not Enter The IF Block?

Jan 15, 2012

I am using the given code to copy my database files...it works like a charm in debug mode but as soon as I create a setup, it stops working. The error is

"Database Detach Failed"

I tried checking the code line by line and found that the code does not enter the IF block.I have no idea why.

Public Sub bk()
Try
Dim strDatabasePath As String = My.Computer.FileSystem.CombinePath(My.Application.Info.DirectoryPath, "LIC.mdf")[code].....

View 2 Replies

Code To Click On Tab And Enter Key Automatically?

Jun 5, 2011

im just made a webbrowser on cisual studio 2008 to enter automaticly to a link but me i want the webbrowser to enter to the link and wait 10 sec then click on Tab key then click on ENTER key Then ENTER key again , then wait 10 sec and close the webbrowser automaticly i want the clicks to be inside the webbrowser for exemple i open the webbrowser the open a auther program for exemple i open a calculator i dont want the clicks to be on the calculator but i want it to be on the webbrowser

View 12 Replies

Code To Enter Letters Of Alphabet?

Jun 7, 2012

I want to validate my textbox so that a user can only add letters of the alphabet and not anything else. so far the code that I have allow alphabetic entries but does not allow to delete and backspace[code]...

View 9 Replies

Code To Use Enter To Search Not Working

Dec 29, 2011

i am trying to make it so that when you are typing a url into the url box on my web browser, you can click enter to search like on comercial browsers instead of having to click the actual search button, im trying to do the same with the web search(google, bing, yahoo!). it worked before, but i've added a tab system to the browser and now it's not letting me click enter to search.

my code:

Private Sub urlgo_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles urlgo.KeyDown
If e.KeyData = Keys.Return Then
CType(TabControl1.SelectedTab.Controls.Item(0), WebBrowser).Navigate(urlsearch.Text)

[code].....

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved