I've been developing a arcade game, and as every good arcade game, it has an incorporated scoreboard so that players can see who scored better. My problem is that everytime it enters a new scoreline, it deletes all the previous lines in the text file. The code I've been using is the following:
If player1 > 25 Then
objReader.Close()
MsgBox("O " + jogador1 + " ganhou.")[code]............
I have a very large text file about 4 million lines that I would like to separate into several small text files based on the strings contained in the first column of the text file. I want to open the large text file, choose the lines that apply, create a new text file with a name that has a number at the end of which will match up with the value in the first column of the text file. I want to then copy the applicable lines to the new small text file, save and close it. I'm not sure how to go about doing this after opening the large text file and using the readline method. What if the folder does not exist? Do we have to create it? I want this procedure to be general, as there could be up to 25 million lines in the text file.
View 13 RepliesI made a game and I would like to store the high score and other values in the windows registry. It's made in VB.NET. Could someone give me a sample code example of simple reading and writing to the registry.
View 5 RepliesI have a program, which writes data to a text file in the following format.
test1 - test1 - test1 - test1
After writing the first line, the text fields are cleared to make space for another round of user input. Simply said, this is how it should look[code]....
I'm trying to read a text file that contains info like this:
ACX-101-011 , J2168
BTXR-130A-013, D6733
AJ4-233-614, T8211
I want to split each line at the comma and write the left side to a textbox and the the right side to another textbox. I'm close, with the code below, but I can only post results from the first line in the file. How do I loop this and append the text results in each of the textboxes.
Dim TempFile As String
TempFile = "temp.txt"
Dim sw As StreamWriter
[Code].....
Is it Possible for me to read text from textbox control and write it to .txt file at specific location.
for an instance.... say below with quote is my Text in .txt file:
"THE QUICK BROWN FOX JUMP OVER THE LAZY DOG"
and with programming code I want to change some text in the same sentance become....(see below)
"THE QUICK GREY FOX JUMP OVER THE LAZY CAT"
so you can see the word BROWN change to GREY and word DOG change to CAT
I've got a program which displays data in a listbox in five columns. All are separated using one or more ControlChars.Tab. I want to write these columns to a text file, however, when I do, my columns lose their alignment. I can change alignment so that it displays nicely in text file, but then it is off in list box. Is there a way to get what I see in my listbox to display the same way in a text file - maybe a different way of separating my columns (not using ControlChars.Tab)?
View 7 RepliesI am trying to ping a text file("C:/Domains.txt") which is a list of domains, then have the resulting IP address written to a different text file ("C:/IP_Addresses.txt"). And this action will be done with a Button_Click.
View 8 Repliesits noobish question but i didnt find any solution for it here is my problem : i want to write bites from 2 seprated file (1.txt + 2.txt) into 1 single file(3.txt) but i cant
[Code]...
[code]I just want it to change item format in listbox (IP: 0.0000.0000.000 PORT: 8080 to 0.0000.0000.000:8080) and write that line to a text file located on desktop!
View 2 RepliesI have a trouble making this code work. When executed, it just creates a correct (with the correct name) file with the extension .txt but the the actual text inside .
Imports System.IO
Public Class Form1
Public mytext As String
[code]...
The strange thing is that while debugging, h, t string variables have the correct values, but somehow mystream.write(t) doesnt work (it doesent write anything to my h.txt text file...
What is the simplest way to check for an existing file. Every method shown to me in my text and the information gained from the Visual Studio help doesn't seem to work. Each one of them tells me the syntax is wrong. I just want a simple way to check for an existing text file that is in the defualt file location.MSDN told me to use FileSystem.FileExists(file) - VS would not take this and...My text Tony Gaddis (VB 2008) shows:
If File.Exists(FileName) Then
open file...
Else
[code].....
I have to write data to an existing text file. I know it is possible to write to an existing file. But, my problem is I don't want to append the new data at the beginning or end of the file. I need to append the new data at the specified line.
View 2 RepliesI'm trying to make a 2D platform game and I'm pretty inexperienced at programming. I've coded the player to move left and right and jump, but I can't figure out how to prevent multiple jumps while the player is in the air. Anyone know how to do this?
View 8 RepliesHow to modify a line in an existing text file in VB. This is the code I was told to use:
do while (sr.peek() <> -1)
line = sr.readLine()
if line(0) = stockName then
' update the line
updatedLine = line(0) & "," & line(1) & "," & line(2) &
else
' don't do anything
loop
The problem is that when I use that I get the error message that says:
Error1'Line' statements are no longer supported. File I/O functionality is available as 'Microsoft.VisualBasic.FileSystem.LineInput' and the graphics functionality is available as 'System.Drawing.Graphics.DrawLine'.
how to read multiple text files in a folder continuously..
example:..
In a folder i have a few of text files such as
sensor.20120101.txt
sensor.20120102.txt
sensor.20120103.txt
sensor.2012010.......txt
..So how to write vb coding to read all text file continuously...how to declare
I'm using the following code to import data from a text file into an existing Access table:
Code:
Imports System.Data.OleDb
Public Class Carrega_CSV
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]....
The first time i ran the code, it caused no error but no records where loaded into the table. The second time it causes the OleDbException "Table 'TEMP' already exists." The text file is comma delimited and it has exactly the same number of columns of the TEMP table.
I'm using the following code to import data from a text file into an existing Access table:
[Code]...
The first time i ran the code, it caused no error but no records where loaded into the table. The second time it causes the OleDbException "Table 'TEMP' already exists."explain me wath am i doing wrong? The text file is comma delimited and it has exactly the same number of columns of the TEMP table.
Here's the code:
<
Dim strTab
As
[code].....
I need to create a timer that sets the time from an existing text file. The time format in the text file is 00:00:00 (hours,minutes, seconds). An excerpt from one of my text files looks like ClockSet = "00:49:05"
Also, if possible, when the timer reaches 2 minutes I would like the backcolor to flash between red and green.
I have created a Yahtzee game, its all complete appart from the high score sheet.
I have added a text file to the project, but I have absolutly no idea how to take the score from the grand total label and print it to the text file at the end of the game.
[code]...
I want to read a random line (that I've chosen via random number) in a text file. I want to the system IO reader. But I am confused as to how to read a random line. Here's what I have...
[Code]...
In case you are interested and have not spotted this.>>
http://gdk.thegamecreators.com/ee Professional Game Development Environment
I have a question about collision, yes my 2d tile rpg's map collision works just fine, but im having trouble with the collision with my npc's. At the start of the game it loads all the map data from a text file. well it also loads the location and other stuff about the npc's onto the map from a text file. how do i detect the collision of the npc's that were loaded from the text file, i could do collision with hardcoded npc's but i want to avoid hardcoding the game content into the game engine. RESTATING MY QUESTION: How do i detect the collision of NPC's that i load onto my 2d tile map from text file?
View 6 RepliesIm making a text based game that i need to randomly select different numbers of lines from a text file then pass them to a list box. The text file is made in the following format:
20058,v,o,ED,95
20059,v,o,TI,95
20060,v,o,TI,95
20061,v,o,SL,95
First the code needes to identify the 4th element then randomly select lines from lines that contain that element. Im stuck on how to randomly select lines from that list.This is the code i have so far.
[Code]...
I have created a scrabble game that generates random letters. For the user to type in a word using the random letters they have to type it in a text box.
I want my program to prevent users from typing in letters that are not provided in the text box and to allow them to type in the random letters that are provided.
I have xml file like following for displaying ads using asp:AdRotator in asp
<?xml version="1.0" encoding="utf-8" ?>
<Advertisements>
<Ad>
<ImageUrl>~/xxx/xxx.jpg</ImageUrl>
[code]....
now i want to add new data between ... tag in asp.net using vb how to do that..?
I am trying to write to a text file....which is fine but thers a but!I want to output date so it is all aligned for example
Name Age
John Smith 35
Danielle Johnston 37
As you can see the above data is not aligned!! VBTab doesn't work as depending on the length of the name the file looks like above I want the text file to look like
Name Age
John Smith 35
Danielle Johnston 37
so everything is aligned!
How can I write a string to a file without having to call on stream reader?Well, If it is not worth it, it is not fun - you say programmers are boring but i say they are worth it.
View 1 RepliesI added a Text File into my project using Project>Add new Item. How would I write text to that file?
View 1 Replies