I have been developing an application where we can get to give access and revoke access from folder provider.in this i want to have a listview with all the users who have access to that folder and there access rights ( read, write, modify etc )
View 1 RepliesI'm looking for a straightforward means of pulling all the users who have access to a folder with vb.net.All I need is the user name, not the type of access they have.
View 1 RepliesI need to have the ability to have a Global variable/class that stores some basic information about the currently logged in user including that user's preferences, security rights, UserID, etc. This information will be needed by any/every part of my application. In the past I have either used a Public variable/class in a vb.net module for this purpose. I'm trying to get away from my old ways of doing things and was curious what people currently do for this functionality.
I am thinking a singleton or 2 regarding preferences and security but am not sure if that is the best way to go.
EDIT: I asked this when I was too sleepy last night. This is an n-Tier WinForms application.
I use VB.Net 2003 and in my application I create a folder that I will use to create files in it.My problem is that under Windows 7 this folder dont have a full permissions and the files are not been created.Is there any way that I can give full access permissions to this folder?I can do it via VB.Net 200358 and via my Wise installation system.
View 3 RepliesI'm in the mid of creating a program that will get the security permissions of a certain folder/s but some properties of the security permissions of a certain folder I can't query or get the values. I'm using VB.NET 2010This what I want to get in every permissionApply to:This folder and subfoldersThis folder, subfolders and filesSubfolder and files
View 2 RepliesI have a treeview control which is being used to browse various folder on the users system drive. It can also be set up to connect network folders using UNC paths e.g "serverfiles". At the moment I'm getting a list of Directories by using My.Computer.FileSystem.GetDirectories however this obviously fails when the folder is password protected.
Is there a way that I can get Windows to open the credentials dialog as you would see in Windows Explorer and deal with the credentials side so then the user name & password is cached as well?
I am trying to read information from any TXT file in a folder. How can I use *.txt?
View 2 RepliesI am using following code to get directory info. it works well if I search topleveldirectory. But when i search alldirectories, it reaches system level information and throws error. Is there any way to avoid searching system level information folder?
Imports System.IO
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As
[Code].....
I am having trouble with this list box assignment. I am supposed to pull the information from a text file in the debug folder. The problem is the code looks perfect to me, but when I debug, the first line that starts with : lstSummary.items.add returns as being in the wrong format. The code is below.
Private Sub btnSummary_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSummary.Click
Dim strAccount As String
[Code].....
I am getting the following error message when I try to call this program from a shared drive on our network;
System.Security.SecurityException: System.Security.Permissions.SecurityPermission
at EMAILVB.EmialVB.EmailVB_Load(Object sender, EventArgs e)
[code]....
I want to use Msinfo32.exe to save " .nfo" file to specific folder with the help of vb code without poping up-viewing the Msinfo32.exe.
I want all the procedure to handled by code (Run Msinfo32.exe --> File --> Save).
The program is currently trying to pull information from three different database tables and compiling the information onto one screen, to do this i am using three different connections and a function to handle the data at each stage. The issue is as my code hits PageLoadStage of "2" and runs the QueryDatabase() Function i am encountering an error of: "OleDB exception unhandled: No value given for one or more of the required parameters." This occurs on line 15 of the first code snippet. Can anyone explain this and/or identify any code issues if that is the cause.
[Code]...
I was looking for some stuff online, and i was looking through my reference sheets for vb.net, but it seems in the code i have found, there is declare in methods. Below is an example i am talking about. The thing is, that i dont recognize it and believe that it is an earlier version of Visual Basic ( 6 or earlier) which used it. Should i just keep looking for different code?
Public Declare Function RegOpenKey Lib "advapi32.dll" Alias "RegOpenKeyA" (ByVal hKey As Long, ByVal _
lpSubKey As String, phkResult As Long) As Long
Goal: Find information on how to implement a method which will check if a certain DSN exists, and then if it does, extract the information and use the information for connection purposes.
I have a text box where i am entering numbers of double datatype andon the Keytdown event of the textbox some checks take pace and in certain circumstances I want to be able to stop the user from entering other information until they enter the right information in the textbox (where it says right here) . now when I say exit sub the textbox somehow loses focus . but this is not how I want it to be I want the textbox to remain with the focus so the user can change the information . How can i go about this. And the other thing is why is my txtDestPayRate1.Focus() just befor the exit sub not working?
Private Sub txtDestPayRate1_KeyDown1(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles txtDestPayRate1.KeyDown
If e.KeyCode = Keys.Enter Then
[CODE]...
I am designing a backup/restore utility for work.atm i have been able to populate field for PC name, IP address, MAC address, number of printers installed on the PC but i am wondering is it possble to get all the printer information 'with the click of a button' to print all information like the prnmngr.vbs script down.I am able to run a batch file but i wanna get it to go from that app or even embed to batch file to the app and run it form there .
View 4 RepliesI am using VB2005 and trying to put an application together.What it needs to do is retrieve information from a binary file, possibly alter that information, and put it back into a new file.The file is a .wav file with data appened to the end. There is an additional section at the end of the .wav file which stores xml data.I have found that if I open this in a hex editor and make a 1:1 swap on any of the bytes that the application that the file is for can still read the XML.If I tried to add or remove characters from the XML then it would not read. I located a header byte and incremented it to resolve this.
This worked as an excellent bandage to do conversions where the data always needed to be changed to the same thing.What I have been asked to do is build logic that allows for different things to happen depending upon what data is contained within the file.The method that I am currently trying to impliment is:
Read through the file with a system.io.binaryreader
Searche for a bytestream that will signal data is coming
For example:
If System.IO.File.Exists("C: est estread.wav") Then
Dim findit() As Integer = New Integer() {&H3C, &H55, &H73, &H72, &H44, &H65, &H66, &H30, &H31, &H30}
Dim i As Integer[code].....
And then extract all the data till the end of element marker "<" It seemed like there should be a better way and I was looking for some insight. If I proceed with this method, I will have to read the file one time to gather the information and then a second time to write it all out with the header modified for length.This is my first experiene with working with binary files in this way.Also,I've been experiementing with building a string and slapping it back in at the end using the binarywriter.write(string) method.I noticed that it was putting in header characters before the string.These seem to change if I change the length of the string.At one point it was d0 07. Later it became e7 07. Does anyone know of a way to prevent this header from being inserted?
I tried a for each loop to grab all of the characters from the string, convert them to a byte array and deposit the byte array into the file, but the header remained the same. When I write the byte array generated from a system.io.binaryreader I do not get this header.
I am using Visual Studio 2008 Setup project. I need to copy one folder and the sub folders into the program files but when I tried to copy or add the folder to "Application Folder" in File System editor, I am able to add only files and not folders.
View 1 RepliesHow would I create a dir Inside %temp%? Then extract the file to it and Open a That folder. So far this is my code.
[Code]...
how to change the install folder path in a setup and deployment project/Installer class from program files to C:usersPublic in windows 7 and allusers folder in xp.Want to add MVP with my name.
View 3 RepliesI installed the new one. I then imported an old project made using vb 2008 EE.I found that a few errors were reported.In the project I addressed some function from a dll called "rsource.dll". I used the following function call:Public Declare Function rs_init Lib "rsource.dll" Alias "init" () As Double.The other different thing is the projevt was developed on a 32 bit OS but since then I have upgraded to 64bit (if this makes any difference). he other thing is where is the debugger PAUSE button. has it been removed from vb 2010?Also when i run debug it seems to create the exe in the Build output target folder instead of the default bindebug folder why is this?
View 5 RepliesPrivate Sub Button21_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button21.Click
If TextBox11.Text = "" Then Exit Sub
MkDir(Dir1.Path + "" + TextBox11.Text)
MsgBox("Folder Created:")
TextBox11.Text = ""
End Subok now the file i have is from my.resources.test1 put this file into the folder that wascreated after mkdir line of code i have tried differnt ways of doing it but dose not work. it seams that this whould be so easy i dont if its me getting a mind block or something
Visual Basic 2008/2010 - Save Page As, create a Folder, upload the folder to a specific ftp site I am working on this vb app that will goto a specific site, click on a button(i am still working on the button process) do a save page as, create a folder, save those files to a folder and then upload that folder to a ftp site.
[Code]...
I have the following directory structure in my asp.net webdirectory i want when any body access anypage inside my admin folder then it auto redirect to login page of admin folder until they login
View 1 RepliesI have made this installation program and everything work just fine, but I wish to improve it a little. Atm. all the files being installed is in a seperate folder, and the installation program simply move them to the right location.There is a builder program too.I would like it to add all files from a list to the programs resource.folder instead of a seperate folder.Atm I add the installation file to the destination folder with the following line. [code]
View 2 RepliesCode so far:
Private Sub Button6_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button6.Click
If FolderBrowserDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then
End If
End Sub
I have managed to get drag and drop working if this is any help:
Private Sub ListBox1_DragEnter(ByVal sender As Object, ByVal e As _
System.Windows.Forms.DragEventArgs) Handles ListBox1.DragEnter
If e.Data.GetDataPresent(DataFormats.FileDrop) Then
[code]....
How to add folder to the current users mymusic folder during setup deployment?
View 2 RepliesI have a question regarding publishing vis ClickOnce. For the publish options, there is a Publishing Folder Location and there is a Installation Folder URL. clarify the difference between Publish and Install, and when it would be apropriate for the two to be different?
View 3 RepliesI am wanting to get a complete file/folder listing and then copy these files to another folder.
Here is my
[Code]...
This happens on many folders. How can I get a listing of these folders and also copy these files?
I have the following code works fine in Windows 2000, after i moved to Windows Server 2003, it shows "Permission denied"...
View 1 RepliesSo I've been using some code to generate directories and such in a custom treeview, but am looking to expand upon this idea. While it's not using recursive functions, and only calls functions when expanding levels, I'm not quite sure how to put some of these together.find a way to just search through all folders on the PC. If the folder contains audio files, that folder is than added to an array (searching a folder for audio files and adding that folder to an array is done). It's just recursivly searching all folders on the PC.Here is the code I've been using for the treeview (I'm not sure if it can be adapted):
Public Function ListAllDrives() As String()
Dim arDrives() As String
arDrives = Directory.GetLogicalDrives()[code].....