This behavior occurs because the Subreport control has an implicit KeepTogether property. By design, the KeepTogether property tries to keep content of a subreport on one page. Because of this behavior, the report engine creates blank space on the main report if the subreport does not fit on the same page as the main report. Then, the report engine creates the subreport on a new page.
View 13 RepliesIs there a way to disable the new VB 2010 implicit line continuations feature in Visual Studio 2010. We are using an TFS 2008 built service which doesn't support the new feature (sources in VS 2010 without errors getting built errors in TFS 2008 built service / we cannot update to TFS 2010 built service).
View 6 RepliesI'm using Crystal Reports within VB.NET and Visual Studio 2005.I have a report with several subreports. I'm setting List(Of MainStuff) as the data sources for the main report. I'm setting List(Of SubreportStuff) as the data source for the subreport. Each SubreportStuff has a key which links back to a particular MainStuff, so the report groups each MainStuff item with its related SubreportStuff items. (Or, at the DB level, SubreportStuff items have a foreign key, which is the primary key in MainStuff.)
Below shows the Load function for the dialog, which contains a CrystalReportsViewer. In the Crystal Reports report editor (within VS 2005) I set the subreport link to pull only the related items into that part of the report.
Imports System.Windows.Forms
Public Class dlgMyReport
Private rpt As New MyReport
Public theMainList As New List(Of MainStuff)
[code]....
This works fine.Now, though, what I'm needing to do is in essence the same thing, but pull items based on the keys in the subreport items. This would mean having a subreport within a subreport. However, it doesn't appear that I can do this (the option for inserting a subreport is grayed out when I try to insert in something that is already a subreport).
I've been googling around to find a way of inserting a subreport by using the designer. So i created a new RDLC report and inserted a subreport on the existing RDLC report. Then i changed the Name property of the subreport to the name of the second RDLC, without the rdlc extension. At execution time it fails with the message:"The ReportName for the subreport Unicre_Report_Comm_SR is not valid. A ReportName can not be an empty string or just white space."
View 1 RepliesI have following simple code:
[Code]...
I suddenly started having a problem with .vb pages refusing to build in ASP.NET 2010. No errors were displayed but the Output window would display something like:
[Code]...
[Code]...
How do I convert this proper? (Option Strict On)
i have created a database application in visual studio 2010 running with visual basic code, the application works great but i want to add a search feature on the dataset bar in the application next to the add and save how do i go about it,
View 1 Repliesi am trying to import a fixed length text file into an access database (accdb). I already have the table created but it doesn't have to be that way. i am wondering if i know the field lengths, can i a use a SELECT INTO query to get the data into access. or do i need a schema file?
View 1 Repliesi am in new dreamincode.net i am trying msflexgird bottom fixed rows vb.net 2010 how can i solve the problem
View 4 RepliesIs there a simple way (without measuring characters using a Graphics object) to check if a font is fixed-width?
View 7 RepliesI am creating an application that will compile code at runtime and then execute that code. My worry is this: Someone might make a malicious script, that deletes files for example. Is there an option in VB.NET that prevents Kill statements and other file operations from executing? Maybe a kind of 'security' feature? If not, is there another approach that I should take?
View 6 Repliestried to dissable the Snap to Grid feature from the "Tools" menu "Options" under the category "Windows form Designer "General" with out any luck, every time I tried to postion any of my controls on the form, I still see the blue and pink alignment lines and I can not align them where I would like to postion my controls on the form, any one can shed some light on this feature or could it be a bug?
View 1 RepliesI'm able to drag and drop a node. The treeview is loaded with files and folders on the HD. The tag of the node has the path to the file/folder. [code] I only want to be able to drag a node into a folder and not into a file, as it does with this code.
View 1 RepliesI am unable to access the TableLayoutPanel feature inside the toolbox in Microsoft Visual Basic Express 2010, I was wondering if this is a feature that is excluded from this package or is it something that I need to download.
View 1 RepliesI'm having a treeview loaded with all the files and subfolders of a path. Each node is getting the filepath as tag. Once I have dragged a node (file/folder) I need to move the file(s)/(sub)folder to the new directory. Each file(s)/(sub)folder needs to get a new tag
View 39 RepliesI have a main Report which consist of (Detail Report)
Transaction #
Amount Due
PaymentType
[code].....
I'm writing a report in VB .NET (using Active Reports) that displays details about a location, and then displays a bunch of images, which are stored in a database. The images are displayed in my main report via a subreport. However, I can't get the images to load. I have two files, the main report (rptMain) and the image subreport (rptSubImages). The sub Detail1_Format in the rptSubImages never gets ran, which is why the images are not appearing, and I can't figure out why! I've included the code below... can anyone pinpoint why my subreport detail section isn't getting called? The rptSubImages report gets initialized, but if I put a stop point inside the detail sub, it never gets caught during debug.
[code]...
fy0910 and fy1011.so when i see the report in schema fy0910 or in fy1011 i have to change every time the schema reference for the subreport,but when i see the report in the specific schema after setting the schema reference then there is no problem in subreport but when i go to another schema then again i have to change the schema reference for sub report.For your kind information there is absolutely no problem in main report.
View 1 RepliesI have created a working report, included a sub-report that is linked to another RDLC file in the same project.The sub report fails to load with : Data retrieval failed for the subreport, 'Subreport1', located at: WML_WS.MediaCur.rdlc. Please check the log files for more information.My question is, where are the 'log files'.I have the following code:
ublic Class frmProofSheet
Public Property Caption() As String
Public Property BookingNo() As String[code]....
Am developing a resume data retrieving software where data is stored in one parent table and 4 child tables as such:
Resume_table ----> Parent table
holds ----> Res_ID, Emp_ID, Lang_ID, Task_ID & some other static data
Employee_Table--->which is referenced directly to Resume_Table.Emp_ID similarly ol other 3 tables are referenced to the main parent table Storing and retrieving data is all working fine as long as I am retrieving 1 record for each child tables But some times there might be couple of languages and only single records for other child tables.In dat case as the four child tables are ol in separate subreports whch are called onto the main report whch prints as cv gives redundancy in data i.e by giving duplication of ol records twice which were single records during entry, which i think follows the language table if it consist of 2 records.am using a join query to call these records onto crystal report...
[code]....
Ok a fellow employee created a CrystalReport that has several sub reports on it. They needed some kind of interface to pass the parameters to the report so I'm doing that in vb.net. This seemed very simple at first, here is the code for setting the parameters and showing the report.
[Code]...
I have a crystal report with a bunch of parameterized fields that are being filled by code and displayed through CRViewer. I need to add a few sections in here to execute a query to return a dataset and display this in the same report. I am not sure if the best way to do this with a subreport. I am trying to add a subreport and then set the datasource of the subreport to my dataset, but I cannot get it to work.
Lets say there is a customers table. I have FirstName LastName as parametirized fields displayed on the form along with address and basic customer information.
I want to place a subreport showing all orders this customer has made on the SAME report. The is an association table with multiple orders possible.
The report is being placed in a class that can be called by a VB.NET app. Therefore I cannot create the dataconnection for the subreport in the UI (or maybe I can and pass params later).
I am successfully populating the parameterized field by doing the following:
Dim myRpt As New RunReport.RunReport
myRpt.Load("myReport.rpt")
'Set Labels
[Code]....
This will be one report I just need to display the subreport section to handle all possible orders.
I created a report [RptContacts] to show the data of all the contact persons in my SQL server database.
The report has a row group on the column [PK_Contact] in the datasource (IQueryable).
An other report [RptCommunications], which will serve as subreport in the main report, shows all the communications we had with each contact person. The datasource (IQueryable) for this report contains the column [FK_Contact] referring to the contact person with whom we had the communication.
I added [RptCommunications] as subreport to [RptContacts]. In de Subreport Properties/General, I indicated both under "Name:" and "Use this report as a subreport:"RptCommunications.
How can I make sure that for every value of [PK_Contact] in the main report [RptContacts], I see the correct records in the subreport [RptCommunications] corresponding with the right contact person. In other words, how can I make sure that for every communication in the subreport, [FK_Contact] = [PK_Contact] in the main report?
I have a very complex multi-page form I am developing in the Crystal Reports which is included in VS2008. There is always 1 Page A. There may be 1 or more page B. There may be 1 or more Page C. Page A has 7 subreports and a header from the main table. Pages B and C hold overflow records that won't fit on Page A.
Page(s) B holds 1 subreport and a header from the main table. Page(s) C holds 3 subreports and a header from the main table.
My problem is the page header on pages B and C does not print except on the first page B or C and I need it to print at the top of each one. (There could be many) Pages B and C are currently subreports but evidently that doesn't work. I have to format the report this way, it's a gov't form. Does anyone know how to get a subreport (which is actually a working report) and which can grow past a single page, to display a page header at the top of each new page?
I'm using Visual Studio 2005 and writing in VB.NET.I have a subreport in a Crystal Reports report consisting of a list of log entries. Sometimes the list of log entries is long enough that it would extend onto the next page. What I see happening is that the list appears on the next page, leaving a big blank space at the bottom of the first page.
I've tried unchecking the "Keep Together" boxes in the "Experts" in a number of different places (sections, groups, etc.) but see no change in the output.I'm guessing that this isn't the right way to go, but do you know what is?
I've been working on a report and it has 2 subreports, one of them can outgrow the region destinated for it (on a preprinted paper), and I want to break the subreport on a new page of the main report (with page header and page footer).
View 2 RepliesI've frequently coded something along the lines of the sample below(with stuff like Dispose ommited for clarity. ). My question is, are the volatiles needed as shown? Or does the ManualResetEvent.Set have an implicit memory barrier as I've read Thread.Start does? Or would an explicit MemoryBarrier call be better than the volatiles? Or is it completely wrong? Also, the fact that the "implicit memory barrier behavior" in some operations is not documented as far as I've seen is quite frutrating, is there a list of these operations somewhere?
class OneUseBackgroundOp
{
background args[code].....
If default 'sa' account has sys_admin permissions for the whole SQL instance and all its databases. On the database itself, if I don't have db_datareader permission enabled, I would assume it doesn't need it as it is implied but I was wondering in .net, is there way to check if db_datareader has explicitly been enabled and not just implied from the 'sa' being a sys_admin.
View 1 RepliesI do the following:
Dim rw() as exportDataset.vendorPricingRow = ExportDataset.vendorPricing.Select("field1 = 1")