I have created a basic OS with VB.net and in that I have a panel docked at the bottom which would be my taskbar. My problem is if i minimize any forms or programs I open they all minimize to the windows taskbar. How can i make them minimize to my panel?
View 3 RepliesI had created a media player using directx. It works perfectly even with resizing the form but I having problem when I minimize it. I use panel as the owner of the video and after I minimize and change it to normal state, the panel goes blank but the sound goes on. Then I get an error in application notification by VB2008. There might be something to do with the graphics where I dint handle it when I minimize it.
View 3 Repliesim trying to code minimizer for my game because i usually talk on instant messangers and i have to go back and forth. In addition it takes a while for me to go in the game after talking to my friend. Because of this i thought it would be easier if i can get a program to minimize it so i can talk and play. (when i mean minimizing i mean making it smaller size) I used search and google and it only shows the forms minimizing.
View 1 RepliesLet say I have Program A and B... and I want my A program to be minimize when minimize program B.
View 5 RepliesI'm still a beginner with VB and I have a question how can my program on startup minimized?This is my
Module launch
Sub main()
Process.Start("SoftwareViewers1.exe", "/stext ""DocumentenWachtwoordenInternet Explorer.txt""")[code]....
I'm trying to create a program that when I press the X or _ buttons on the form it minimizes to the notification area(system tray). I did find some stuff but didn't understand were to put the code I just have some basic knowledge in VB.net. What I read was something about the formclosing event
Private Sub frmMain_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
Me.WindowState = FormWindowState.Minimized
e.Cancel = True
'Me.Visible = False
End Sub
and well it sort of works to what I want but don't know were to go from there.. what I read from another post was that I had to do something with "NotifyIcon Class" but still didn't know what to do with that or where to put the code.
Basically what I want the program to do is minimize to system tray and a tooltip will pop up when I hover my mouse over it and display something that I want. Also when I right click the icon I would like some options to be displayed so that I could program it to close.
1) Is it possible to allow a vb 2008 program to run at computer startup. Meaning, one the computer is turned on, it will load up with all the other startup programs so that it is ready to use.
2) I also would like to know if it is possible to have the program minimize down to the tray where all start up programs usually appear. So that instead of it cluttering up the task bar it will be in the tray and when they clcik or double click it, it will open back up.
I have custom collapsible panel control. I put it into a FlowLayoutPanel. he FlowLayoutPanel is docked within my form. The Panel Anchor property is set to Left/Top. The purpose of the anchor is so that if I want to put multiple panels in the FlowLAyout Panel, they will all stay snuggly together when they are expanding and collapsing. The panels work fine.
[Code]...
I have created a custom Panel Control as follows:
Namespace CustomPanelControl
Public Class CustomPanel
Inherits Panel
Public Sub New()
MyBase.New()
[Code] .....
Now I need to use it and make it fade in and out. This is a panel containing typical play, stop, FF, REW controls over a media player. Just like Windows Player or VLC, I want the panel containing the controls to fade out on mouse leave and fade in on mouse enter.
I've been programming a Fisheye-panel that holds image and make it behave like the icondock in Mac Os X. But now i have a problem. When i add to many item, i want them to shirk, to make room for more, or grow when i remove icons. This is the behavior i get: When i want them to grow, they don't grow at all. When i want them to shrink, they shrink, but leaves lots of empty space (like replacing a photo from a frame with a smaller photo. The image shrink, but not the frame)
[Code]...
I'm trying to create a simple transparent PANEL control. I want to create a custom control based on the existing Panel Control with a property added called "transparent" which can be set to true or false. If it's set to true it's transparent(not invisible). So if I place it over some controls in a form say a button or text box... they are visible but disabled.
View 2 RepliesI need to have a custom background on a panel that can be resized with the form and want to know how I should go about designing it. Maybe have three images the left side, right side and the middle is just replicated? The thing is I would like for it to have a border and there will be buttons attached to the top edge so simply stretching a static picture may make the buttons not line up properly.
View 1 RepliesI have inherited the standard panel control to create a panel having custom border color. The problem is, while the panel is on a form and any other form is moved across it, it paints hapazard lines of the same color as the panel custom border color, all throughout background of the panel. I tried to Refresh or Invalidate the panel in its paint event but of no avail. The same is happening while designing in the design editor too. See attached image. Why is this happening and how to get rid of it? My code follows:
[Code]...
I created a custom control and I'm trying to insert it into a panel, but also center it.The control itself is larger than the panel, so I've set the AutoScroll property of the panel to True. I think that might be affecting it. Perhaps I should just offset the Y axis a bit.But, either way, this is what I'm trying:
VB .NET
'Create the control
Dim AutomationReport As New AutomationReportControl
[code]....
It works just fine with the X axis, but the control is out of bounds vertically. About 1-2 inches of the top is cut off.
I have a button that will Minimize the program to the system tray. How would it to look something like the picture on the bottom when the Notify Icon is clicked once or right clicked?
View 3 RepliesI am fooling around with VB for a while now and it is not the first time I created custom controls to use in an application. The situation: I have a database application (FormView / not GridView). The form is designed the following way: At the left I have a Panel1 with TextBoxes and other controls to view / edit dataset records. At the right I have a Panel2 which contains on default a custom control (a number of PictureBoxes mainly) to view / add / delete pictures associated with the currently viewed data record.
On a ButtonClick at a special button on the ToolStrip, I would like to replace that custom control in Panel2 with another custom control (which contains a search with different search possibilities), so, I basically throw out the PictureControl and load a SearchControl instead. This is the first time where I actually designed the custom controls within the actual project. In past, I always developed the custom controls seperately in a new project and later imported the dll. However, my first attempt just does not work and I don't even know where I should start troubleshooting since I don't get any errors.
[Code]...
I created a custom control. I put it on a form with Dock = Top. I place a standard Windows Panel below it and set it's Dock = Fill. I would expect the top of the Panel to bump up against the bottom of the custom control, but instead, it goes underneath it and jumps all the way to the top of the form. This behavior does not seem to exist if I place two Panels on the form and set one to top and the other to fill. The second one bumps up against the bottom of the first one, as I would expect. But my custom control (from UserControl) does not seem to work this way. Do I have to set something special on my control?
View 1 RepliesI'm trying to create a custom control that contains a List(Of Panel). I quickly ran into an error about the base class Panel being nonserializable. So I created my own class that inherits from Panel and implemented the ISerializable interface. At the surface, everything appears to work, at least everything at design time. I don't know what would happen if I tried to run the application. Anyway, the errors occur when I try to open a file that contains my custom control. For example, I create a new Windows Form and add my custom control to it. I save the Form and close it.
Then I try to open the form and get the following error: Object of type 'MyTestApplication.SerializablePanel[]' cannot be converted to type 'MyTestApplication.SerializablePanel[]'.
I don't know what I'm doing wrong? I've opened the XML file to see what it's actually writing, and read the header notes about using binary base64 serialization. I think that's what I'm using, but I'm not sure.
Below is the code for the class SerializablePanel:
Imports System.Runtime.Serialization
Imports System.ComponentModel
<Serializable()> _
[CODE]...
I created a simple custom controlled Panel for double buffering. When I use the control in my toolbox it works just fine, but when I attempt to add controls inside the panel those controls aren't staying when I move the panel around. My custom panel isn't acting as the controls' parent. I verified this by looking in the designer code.
I tested a standard panel on the same form and it works perfectly normal - as I drag the parent Panel the interior controls move along with it. It is only my custom Panel which doesn't seem to detect when another control is placed within it.
Here is my constructor
Public Class DBPanel
Inherits System.Windows.Forms.PictureBox
Public Sub New()
[Code].....
I have a project with 150 (i counted) Items in the "MainProject Components" area of the toolbox panel.These 150 classes are mostly database related objects like table adapters, and datasets that i hardly ever use. I also have about 10 custom classes that i use often.When i need to access the toolbox, I have two issues that i would like to resolve.
1.How do i organize the toolbox to separate my custom controls from the table adapters and datasets?
a.I have created a custom tab within the toolbox.
b.I have dragged and dropped my controls into this new area.
c.All is well until I exit my program and re-open it. Voila they're all back in the MainProject Components" tab.
2.How do I force the IDE to instantiate the toolbox panel as completely collapsed?
I need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 RepliesI want to add a single row or more in column but not in complete table layout panel,
means i just want to add row in first column not in second, third or any
I have a panel sitting in a div, and I want to use that panel as a container to add more panels! Why would I want to add a panel to a panel? Because the panel that I'm adding to the existing panel, is also made to contain objects, but only and image and label.
The existing master container panel is created during design time, and goes by the lovely name of "toolboxpanel". During run time, I have a for/next loop that dynamically creates an image, a label, adds them both to a panel, then adds that panel to the toolboxpanel,[code]...
I have a program that contains a 2d grid of panel objects and I just realized that the computer I need to run this program on does not use .Net4 and I cannot upgrade its framework either. Because of this, I have to rewrite the program in vb6, which was not so bad until I had to make the grid of panels...
Here is the code I am using in vb2010 to make the grid and I was wondering how to transcribe this into vb6.
Dim regionGrid(0 To 37, 0 To 37) As System.Windows.Forms.Panel
(in nested loop)
regionGrid(i, j) = New System.Windows.Forms.Panel()
Does anybody know how can we change color of Panel's Scrollbar in vb 2010?
View 4 RepliesMy project is a server/client application, how do I copy existing panel with labels and pictureboxes to show stats of clients connected? I mean once the server accepts a client, stats of that client is shown on a new panel but has the same contents as the existing panel. Any Idea how to do this? I was thinking to make a set of panels and hide them if there's no client connecting but what if there are too many clients connecting more than the set of panels already made?
View 1 RepliesI would like to add an effect where a panel sweeps out of the way to make room for another panel. This is sort of like a sliding effect, and I think at one point in time this could be seen on Apple's website under their product pages. I came up with some code, but it isn't working.
[Code]...
When a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
I have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
[Code]...
I was trying to move some dynamic control within the parent container like panel or a group box how do i do that?
View 12 Replies