Pass Dbnull Or Nothing Value To Sql Server Using Tableadapter If Textbox.text Is Empty
Aug 17, 2009
I have a form with the following on it [code]then everything works as it should (as long as there is data in the text boxes) If there is one of the text boxes is left empty then an error is returned. The text boxes are not bound and the db is set to allow nulls. Is there an easy way to suggest that if name.textbox is empty then input "nothing" or dbnull etc.I have a lot of text boxes (approx 30) and ideally dont want to write if statements for each one. But will if i have to of corse.
I have a View that i am trying to use to fill a TableAdapter with. In my code i fill the table adapter properly the first time, filter my bindingsource and use datarowviews to loop through the rows of data and perform the updates needed (done by a stored procedure). Now the problem is, after these updates take place, i need to fill the tableadapter again so that it reflects these changes. Sometimes the View i am using will have no results, other times it may.[code]This is the exact Error "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."Okay, you'll notice that i fill my view, then filter those results on the column Number equal to 1. I loop through all those results and update the table my view is created off of. After exiting the loop i hit the second .fill which times out after about 20 seconds. After testing, this time out only seems to occur when MyView does not hold any records.
I use Visual Studio 2010 and sqlserver 2008. All work is done in VB.NET. Also, during debugging, i paused on the second fill, went to Toad for Data Analysts and ran a SELECT * FROM MyView which did not time out and returned the empty result table in about 19 seconds. I have also tried doing a dispose on the tableadapter before the second fill but it has a similar time out. Sorry if this answer seems obvious or something, i'm only an Intern and am still learning the language. That seems to have done the trick, from my understanding that lets it run until it finishes (SQLServer will shut it down if the connection stays open longer than it allows). The ta.fill runs at about the same pace as Toad coming in around 19-20 second mark and does not error after multiple tests.
I have already defined in my SELECT statement in TableAdapter to tell it what to do if the parameters are Null:
SELECT a.ID, a.NameID, b.BNameID FROM a INNER JOIN b ON a.ID = b.ID WHERE ((@NameID IS NULL) OR (a.NameID = @NameID)) AND ((@BNameID IS NULL) OR (b.BNameID = @BNameID))
Created dataset with tableadapter.Dragged dataset and tableadapter to the form so I can reference it in code.New records successfully add to the dataset but will not commit back to the database.Gives no error or clue why it won't work.TableAdapter insert statement was created automatically and is parameterized (@p1, @p2, etc.), but I am trying to avoid those parameter.add statements as I want to be able to use a field-by-field format without having to essentially repeat the schema of my database in code with parameter.add statements.Command object and INSERT statements work fine, but then you always have to construct an INSERT statement -- a pain if they're complicated.I want something as simple as working with a ADO recordset,but in .NET.What can I do to accomplish the following without parameter.add statements? [code]
What conditional statement is used to identify if username.text is empty or password.text is empty or both is empty then prompt a msgbox that tells what part is empty. My attempt was bad and my first time to use select case. [code]
Couldnt think of a good name for this post but I tried my best.I have a button which checks with a FTP server if the text in a textbox exists as a file. If it does then form1 opens.Sometimes the connection check times out.So Is it possible to make a small code like this? if form1.show (doesnt show after 10 seconds) then go back to the beggining try again end if
Im trying to retrieve some rows from sql server having datetime column that matches the given value of the textbox in a form. The tables datetime column name is "DepDateDepositDate" and the textbox.text was formatted as longdate eg("Tuesday, April 06, 2010") I have this code below but it seems its not retrieving the data that i wanted.
Dim daBnkBok = New SqlDataAdapter("Select * From DepositRef Where Convert(varchar,DepDateDepositDate, 112) = '" & Convert.ToDateTime(clsGlobals.BankBook.bbDepDate.Text).Date & "' ", bbcons)
I created a button in my form which is used to add a new textbox.But before that, the button should identify if all the textboxes that have been created are empty.If there is an empty one, it would not add a new one.[code]
i have a next button that is enabled only after a textbox is filled its working fine but the problem when a user fills the textbox it will be enabled then clears the textbox it will stay enabled and he can proceed how to stop that ?
I'm trying to track down the cause of an annoying interface bug in an app that was ecently upgraded from VS2003 to VS2008 (the bug did not exist pre-migration).What happens is this :1) User clicks in textbox containing a date.2) User clears date3) User tries to move to another field, but can't. No error messages appear - it's as if the validation failed.Further info :1) The textbox's Text property is bound to a dataview which uses a datatable as its source. The bound field is a nullable datetime field with no constraints or default.2) The Validating event fires and the CancelEventArgs property is not set to Cancel. The Validated, LostFocus and Leave events all fire as well, going LostFocus > Leave > Validating3) I can't see any code changes relating to the control or the datasource with a couple of exceptions. The first is that this :
Me.txtRangeEnd.DataBindings.Add(New System.Windows.Forms.Binding("Text", Me.dvClientNos, "RangeEnd")) has now changed to this :
I have a form with a textbox, and i would like validation to occur so that a blank field is not allowed e.Cancel = String.IsNullOrEmpty(TextBox.Text) Does not always work, because it still allows me overwrite an existing field with blank spaces, and then update.
I have textbox that is empty and where the cursor is flashing and I wish to move to other textboxes.What happens is that the error message is displayed first and when I press OK, only then can I move to the other textboxes. How do I stop this happening. Am I missing some code.
DesterateDan Private Sub salesInput_Validating(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles salesInput.Validating
I am trying to save a new object to the database using petapoco.I have an object that uses a Guid for the primary key.Here is an example of the objects primary key property.
<PetaPoco.Column()> _ Public ReadOnly Property Primkey() As Guid Implements IStandardDocument.Primkey Get
The sql that is generated is an update with a primkey of 00000000-0000-0000-0000-000000000000 instead of an insert. So new records are never inserted.If I have an existing object with a valid guid the update and delete all work correctly.
Ive got a Form application in VB.NET.I have many text boxes on one form (about 20). Is there anyway to check them all at once to see if they are empty instead of writing out a massive line of code to check each one individually such as
If txt1.text = "" Or txt2.text="" Then msgbox("Please fill in all boxes")
I am using VB.net to create a simple winform. I have the option to save the data I input on that form. I am trying to prevent the user not to save the data if textbox10 is empty. I tried the while loop but I go into an infinite loop. The code is below. The if statement gives the error but allows the user to save.
I started editing an existing code (basicaly to learn vb) without any real previous experience. Well let's get to the point;I have a form that gathers data from db ordering by user ID (on click count).I have one DataGridView with a list of user,some have data in db, some have not. I came so far that if I CLICK on a user that have data, all data is dissplayed in 6 dinamyc textboxes.If user has no data inly first (emty) row with 6 dinamyc textboxes is created.
BUT THE POINT IS (my question to you) - I have a button that simultaneously adds a row of dinamyc textboxes bellow and multiplyies textbox04 (name is clickcount & 4) and textbox05 and displays the result in textbox06.I want to add a messagebox that shows if textbox04 & 05 are empty and in that case exits sub. Here is my code so far:
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click 'Reset warnings[code].......
Adding a records with ms access.if my form load is empty in my textbox and press ok button will show a message box "Records Failled".I'll try to run it and i got an error "Data type mismatch in criteria expression." [code]
My code so far: If newpound.Text.Length = 0 Then Else Dim newpound1 As Integer Static savedpound1 As Integer savedpound.Text = newpound.Text newpound1 = newpound1 savedpound1 = savedpound1 newpound.Clear() End If
What can I put between Then and Else to ignore Dim newpound>newpound.clear? If the text box is empty and it moves on to the next one.
I have an ASP.Net 2.0 textbox which I need to be validated as having some content, but where whitespace alone is valid input. A required field validator seems to reject a pure whitespace input as invalid. A regular expression validator won't fire at all on empty content. Is there a simpler way round this than using a custom validator control?
i have a form with 4 text boxes on them when the user selects add the information from the textboxes saves to my database im just wondering does anyone know how i would make an error message appear if one of the textboxes was blank and stop the new data being saved until all textboxes have data in them?i did write the following peice of code but it did not work Private Sub Button1_Click(ByVal sender As System.Object, ByVal e_
When im using a loop in my program and i'm trying to use an Error Provider to pop up whenever a textbox in my groupbox is empty for some reason I cannot get it to work, can anyone tell me what i'm doing wrong?
For Each ctrl As Control In GroupBox1.Controls
If TypeOf ctrl Is TextBox Then If CType(ctrl, TextBox).Text = "" Then
[CODE].............
I'm not receiving any type of error, it's just that when a textbox is blank the error provider is not doing anything.
how I can allow the program to exit while the textbox is empty but I can't figure out how it works really..it will not allow me to exit,enter, or tab out of the textbox while its empty.
Private Sub gradeTextBox_KeyPress(sender As Object, e As System.Windows.Forms.KeyPressEventArgs) Handles gradeTextBox.KeyPress Select Case e.KeyChar Case "0" To "9", vbBack, vbCr e.Handled = False
I am using VB.net to create a simple winform. I have the option to save the data I input on that form. I am trying to prevent the user not to save the data if textbox10 is empty. I tried the 'while' loop but I go into an infinite loop. The code is below. The 'if' statement gives the error but allows the user to save.
While Len(Me.techniciansTextBox.Text) = 0 MessageBox.Show("Please Enter a Technician To continue") End While
