im trying to make an example program for a teacher friend of mine
Springfield
Toledo
Youngstown
[Code]....
thats just what i have so far but im really having trouble getting the other part into a 2d array. i want the second half to look like this when done: the oppsite of what it looks like in the file.
001
359
203948
in my text file i have two part. Called bottom and top. So i need to read the Top part first then and match the line with bottom part. Its like this
[Code]...
What my program does is load a file (password list), then progressively reads each line of text in the file whilst writing each line to a new file. After X amount of lines have been written, it should start writing the lines of text to a new document until the initial password list has been split into X amount of password lists. The problem I have is that after hours of tweaking, all I can get it to do is write either blank ocuments, or write all of the lines to only one file. I really need it to be able to split into multiple files, preferably at runtime rather than loading a whole text document into the program in a textbox or array then writing it to new files.Below is the source:
Imports System
Imports System.Windows.Forms
Imports System.IO
[code].....
Can I save an array into my .bin file then read the array again just like a string or Integer??
View 2 RepliesI'm trying to read a text file by use a array for an interactive map. In the text file I stored shop names such as:
Label2.Tag = "test"
Label3.Tag = "House"
When I hover over a label it will display the name in another label such as "lblShowName".
So far I have the array that reads the text file.
dim shopNames() as string = io.file.readalllines("fileName")
I'm trying to read specific values from the text file (below)[code]...
How do I store only the data I require in the array? I've tried split and substring but cannot work out a usable method - I need on the text after the colon for each line.
I'm looking for some code to write /read an array to a text file in vb6.i have an array of a fixed size, and i need to write that into a text file, then later in another program i need to access that text file and write every element to a new array of the same size.the elements will be integer values, but "Long" datatypes. there will be no strings or anything else, just whole numbers.
View 2 RepliesI'm trying to do is to read the lines from a text file, and transfer them to an array.[code]...
View 3 Replies�On load read data from units.txt into an array of structures;�Allow the user to choose a major and then add units to a study plan.Note your program must not allow the user to add units not in the major and a unit can only be added once to a study plan;�Save student first name & last name, student number, unit codes to a user selected file (e.g. fred.txt); �Allow the user to select a student file to load using a common dialog control ;�Display the units for that student.
The program must have the following features:�It must use a common dialog control for saving data;�The program must have at least one general procedure; �The program must demonstrate the use of an array (array of structures recommended).I've attached a copy of the text file needed to be loaded.
if i have a text file that reads
gsf
hot
dmg
bp
comp
how can i pull it into an array and if the textbox = any of the lines then execute event something like this
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If Me.textbox1.text = (textfile contents) then
timer1.interval = 500
[code]....
im just not sure on how to initiate the calling of the text file into an array.or if i could call lines from a richtextbox and if textbox1.text = a line in the rtb then execute. I guess what ever would be simpler.
I am unable to read from the text file in VB. I want to read the contents for text file and store them in array. See my code below and the text file. How should I read this text file.
'Purpose : This program will read student name & final marks for a set of students from the text file and then calculate & display class average, class standard deviation, number of students above class average, name of student with highest mark, number of students with A's(90-100), B's (80 < 90), C's (65 < 80), D's (50 - < 65) and F's (<50).Calculate for standard deviation of a set of numbers:Step1. :Find the average Step2. : Square the difference between each number and the average
[Code]...
How can I write and read a string array to a text file?
View 2 RepliesI have to text file in the following format :
Word[tab][tab]Word[Carriage Return]
Word[tab][tab]Word[Carriage Return]
Word[tab][tab]Word[Carriage Return]
I want to get all the words before the tab into one array or to create a new text file and the all the words after the tab into another array or create a new text file too.
Here my function to get the words before tab into an array :
Protected Sub MakeWordListBeforeTab()
Dim filename As String = "D:lao�0001.txt"
'read from file'
[Code].....
I wrote the above function to get all words before tab but I got all the words into array. I've been trying to use the Split method above. What is another method to split those words ?
I know this can be done with regular expression but I don't know regex yet. If you can show me how to get this done with regex it'll be awesome.
I have a Comma Separated value file in .txt format... simply put, its a bunch of data delimited by commas and text qualifier is separated with ""For example:
"So and so","1234","Blah Blah", "Foo","Bar","","","",""
"foofoo","barbar","etc.."
Where ever there is a carriage return it signifies a new row and every comma separates a new column from another.My next step is to go into VB.net and create an array using these values and having the commas serve as the delimeter and somehow making the array into a table where the text files' format matches the array After that array has been created, I need to select only certain parts of that array and store the value into a variable for later use.... how to make the array and selecting the certain info out of it..
Im trying to do it myself but im not sure how you get letters inputed in a text box to determine which part in the array it is. Here is the problem:
[Code]...
I am working on an assignment where I need to have a product list that is loaded into a list box upon the form loading. This is generated from a txt file in the /debug folder upon loading. Now my question is how do I have the product names show up in the list box when there are 3 separate parts to each product. The product, the cost, and the quantity in inventory, and all I want to show up is the product in the listbox, where the rest show up elsewhere.
CODE:
'This procedure loads the data for the array from txt file. As well as loading the Product.txt file into the system when the program loads.
CODE:
My problem is that I've created a program where I have 6 textboxes and I coded the program to write the text that is in the textboxes into a txt file. But, when reading, I want it to read just a part of each line. Check this example of the textfile[cod]e...
View 3 RepliesHow do I read a raw byte array from any file, and write that byte array back into a new file?
View 3 RepliesI want to create a second array identical to a portion of a second array, but can't figure out how.
For example if I have Array1=("One","Two","Three","Four")
and I want Array2=("Two","Three")
Is there a simple command to do this?
Im wondering how would i work with a text file. which would allow me to Read the next Record, Cut record out of the program.
View 15 RepliesI have a raster and want to read the data of the cells and store each data as a different variable The file is like this How can I read and store each data as one single variable, like an array?
ncols 7
nrows 8
xllcorner 578538.62
[Code]....
I have been trying to research how to get a file (basically a csv file) from a url to an array and my search has come up with some examples, but not quite what I am looking for. Would appreciated any direction and or other examples of folks that have done this before.Basically we have a cloud computer set up (Hadoop) and the output of some of our processes is what I am trying to get to.[code]....
View 1 RepliesI have a function that reads a character array from a file, converts it to a byte array, then writes it to a Network Analyzer. The problem is the conversion takes forever as the size of the array is about 287,000.... Here is the code..
Code:
Dim objSR As New IO.StreamReader(strPath)
Dim charA As Array = objSR.ReadToEnd.ToCharArray
ReDim bytedata(UBound(charA))
[Code].....
How can I convert a file to an integer array? I have been using this method but I'm hoping there is an easier way:
Dim StreamRead As New System.IO.StreamReader(FileName)
Dim file() As Integer
Dim loops As Integer = -1
[code].....
The file I need to read in is a square 8x8 or NxN. the chars are separated by spaces and at the end of the line I believe a crlf. When I try to read in the file i get the crlf's when i use this [Code]
View 1 RepliesIs there any special way of reading a pdf file into a byte array? The reason I ask...I want to fax a pdf file using faxDocument and FaxServer. My current code is working fine for everything else. Now I know that in the documention it says it should not work for pdf. But I can get some pdfs to send and some do not. When I fax a pdf through windows, it works. [code]....
View 5 RepliesSome binary files have application variables at the end if you open it with a text editor you can see these variables. Now when I read these files into the processor memory the program does not work properly, however if I read a file without this it works fine. So how can I read a byte[] array to EOF so that when I pass that byte array into win32 api create-process it will create the process without corrupting the program?
View 3 RepliesHow can I convert a file to an integer array?
Dim StreamRead As New System.IO.StreamReader(FileName)
Dim file() As Integer
Dim loops As Integer = -1
[code]....
I've never had to work with them before, and I think I've got everything down except one big thing: I'm setting it up so that different settings have different values depending on what file is being read. I need to know how to tell vb to take a specific item in an array and make the setting equal to it. I know how to make it read the file and add each new line into the array, just need to make sure I'll have to correct method to get the item in the array to match up the setting.
View 3 RepliesI have developed a vb.net dll (.net 3.5) which does the following :
- I have data of several stock market companies.
- They are stored in several folders under a main folder.
- These files are random access files.
- There can be around 4000 files in total for example.
I wrote a program which reads a current csv file and stores contents in array. Then I store name and path of companies in folders (which I was talking about). Then I match one company from csv (stored in array) to companies in user's folder (again reading from array). If found I insert data in the file (random access file). This whole process takes for eg. 2 min my system. A similar program was written years ago by someone in powerbasic which takes slight less time if run one but if run for multiple csv files it takes only a few seconds doing the same thing for other files. When I do the same thing (by writing code to .net dll) and making a dummy app to run it, no matter how many times I run it takes same time. And is way slower than the earlier one (PB) one I was talking about. But if I paste the same code in my win (.net) app and not use .net dll then it runs a bit faster.
I need to show status so if I pass my form's label reference to .net dll and it updates it does that slow down process a lot. As I mentioned I am trying to process the files and it takes longer in .net. What should I do to get best performance? Unfortunately due to unexplainable reasons I cannot change the format or use a db. The files which I am reading/writing (random access files) are use by other products so I have to stick to that format. What I am doing is storing the location of those files in array so that I don't have to search folder again. that is not taking time. But opening reading and writing files is time consuming if I am doing it for few thousand of them. A similar program in powerbasic (developed years ago) runs fast. Running code thru .net dll is slower than running it thru program. Why?
