Reference A Backgroundworker On A User Control That Is On A Tabpage?
Mar 31, 2011
I have a GUI that allows a user to add tabpages to a tab control. Everytime the user adds a tab, a user control is placed on the new tab. The user control has a background worker on it, as well as several other controls. My question is this: Can I access the backgroundworker specific to a tabpage? In other words, can I tell the program to use the backgroundworker found on tab index 0 to run a process, and then tell the backgroundworker on tab index 1 to run a different process?
View 1 Replies
ADVERTISEMENT
Jun 10, 2012
I am trying to display an usercontrol(has several panels one on top of the other panel) on tabpage. I am using below code to achieve this.
[Code]...
View 1 Replies
Nov 19, 2009
I have a application with a tabcontrol. I dynamically open new tabs on which there is a custom control which is made of a graph and a datagridview with data. I fill this from a csv file. when I open few tabs like this my application memory goes over 120 MB. When I remove the tab I call the dispose on the custom control and a dispose for the tab. But the memory stays where it was (120+MB). It goes down only if I minimize the program. And when I show it again its around 10MB.
View 3 Replies
Nov 16, 2010
I have created a user control and am able to add it to a page with out any problems, but how to I reference a control that is inside of the user control For example if I have a text box inside the user control and want to set the text property through code or get the text property, How can I reference the control inside the user control. I have tried a few different things but nothing seems to work when I type the usercontrolname.control.property I just get an error.
View 3 Replies
Jan 16, 2012
Been searching a trying examples for a couple of days and always fall back to the "null reference" error on this one. I have a set of instructions coming from a SQL database and the number of instructions is a variable. Therefore, I have a TabControl which I add TabPages to at RunTime depending on the number of instructions there are. The TabPages are then created with the names; Step1, Step2, Step3, etc.Each TabPage is made with the same controls and all of the controls are named the same from page to page (e.g. "instr" is the name of a TextBox control that exists on every TabPage).I can successfully create a GetControl method that will return the correct TabPage, but I cannot reference any controls on that TabPage.I can only change properties of the TabPage.If I try to reference a specific control on that TabPage, like the "instr" TextBox control, I get the null reference error.[code]
View 9 Replies
Feb 5, 2012
I have a really simple user control.Using the Designer I put two TextBoxes on it, nothing else.Here's the entire .vb file for this user control:[code]
View 6 Replies
Feb 10, 2012
I have created a custom user control (JCUserControl), and I am using it in the Main Window. And my Main Window has no codebehind. I have this in the JCUserControl codebehind:
Private Sub ImmediateRadioButton_Checked(sender As System.Object, e As System.Windows.RoutedEventArgs) Handles ImmediateRadioButton.Checked
SomeTextBox.IsEnabled = False
End Sub
When I run it, it fails with the NullReferenceException. If I comment out the SomeTextBox.IsEnabled = false, it runs without any problems.
Edit: Found out that I could just check if the radio buttons are loaded before doing whatever I want to do.
Private Sub ImmediateRadioButton_Checked(sender As System.Object, e As System.Windows.RoutedEventArgs) Handles ImmediateRadioButton.Checked
If ImmediateRadioButton.IsLoaded Then
SomeTextBox.IsEnabled = False
End If
End Sub
View 1 Replies
Jan 31, 2012
I try to disable a tabpages in .net but it doesn't work properly , if try to do this Me.TabControl1.TabPages(1).Enabled = False it let me enter to de tabpages .
Bhagabat Dayal Dash Software Developer Qlogix Solutions(India)
View 1 Replies
Mar 4, 2010
How can I edit the time on my form. I have a one tabpage Schedule on which I want to set time according to user's choice. (I know how to display current time). If current time is 5.50.55 PM then user can set anything for eg. 6.45.12 AM according to he want to schedule.
View 2 Replies
Jun 5, 2012
I am trying to display an usercontrol(has a panel) on tabpage. I am using below code to achieve this.[code]...
The problem is that the control size is blown up when I run the application.
View 1 Replies
Sep 15, 2010
I am using Visual Studio 2008 and recently a weird bug has appeared.In my forms I have a tab control with multiple tab pages. I can place a control on a tab page fine, but when I move it by way of clicking it and dragging it to another location, it leaves behind an outline of where it should be. Looking around, it has moved to the first tab page
View 2 Replies
Jan 8, 2009
I am using System.Windows.Forms.TabPage to store an entire TabPage for later use in My.Settings. Here is a brief description of the application.
I have a TabControl that has 3 tabs. One for user input, another tab for equipment settings, and then a final tab for Oven settings. On the user input tab, if the user de-selects the checkbox for Oven, the oven tab is saved to My.Settings and hidden.
I can then run the application without oven control. After running, lets say the user would like to re-run, this time with the oven. They go back to the input tab and re-select the Oven checkbox. However, the Oven tab doesn't re-appear. When stepping through the code, the is nothing stored in My.Settings for the oven tab page. Why not?
Also, I can open the application, and check, then uncheck the oven checkbox and the tab is hidden, then returns. I can do this all day. However, after running the tab will not return.
View 5 Replies
Aug 17, 2010
I am having a bit of a problem adding an MSTSCLib.MsRdpClient7 control to a tabpage form.The code snippet at hand:
Dim t As TabPage = New TabPage
Dim rdpcount As Integer = 0
If Not rdp Is Nothing Then rdpcount = UBound(rdp)
Debug.Print("Current RDP count: " & rdpcount.ToString)
[code]....
This code bombs on that last line with the following error:
System.InvalidCastException was unhandled
Message="Unable to cast COM object of type 'MSTSCLib.MsRdpClient7Class' to class type 'System.Windows.Forms.Control'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface."
View 3 Replies
Feb 18, 2010
How can i make a control in a tabpage when y program is running i got this [code]but this doesnt create it in the tabpage
View 1 Replies
Feb 22, 2011
I'm struggling how to set up MDI interface where I have a tabpage control on the parent form. Each individual tab page should act as a parent to multiple child forms but within a tabcontrol there is no IsMdiContainer property like on the form.Is it possible to set a tabcontrol to act as a parent?
View 1 Replies
Jun 11, 2012
I want to make a new RichTextBox contorl when a new tab page is created. I also need that control to be the child of the tab page. I created a class for the tab control. And a class for the RichTextBox control. I dont know how to start this. I have made a class for the RTB because I figured I could override the sub new procedure but you can't so i just declared it as public and set what I needed it to do. But it doesn't work.
View 1 Replies
Nov 3, 2009
I want to make a new RichTextBox contorl when a new tab page is created. I also need that control to be the child of the tab page.
I created a class for the tab control. And a class for the RichTextBox control.
I dont know how to start this. I have made a class for the RTB because I figured I could override the sub new procedure but you can't so i just declared it as public and set what I needed it to do. But it doesn't work.
View 7 Replies
Feb 4, 2010
I have a tabgroup with 2 tabs. During runtime, I wish to add new ones. Though I can get the tabs added, I cannot seem to add the ListBox that is supposed to go with it.
In the code below, I added '*' to indicate a line I added to try and fix the problem, but (obviously) don't work.
Dim newTab As New TabPage("Group " + g.userLabel.ToString())
newTab.Name = "Tab" + g.userLabel.ToString
TabGroups.TabPages.Add(newTab)
[Code].....
View 2 Replies
Mar 8, 2009
I would want it that upon pressing the Tab key in the last control of the TabPage then it will go to the next tabpage and focus on the first control there that has its TabStop set to true. I could trap the Tab key in my current implementation but is there be an easier way?
View 13 Replies
Mar 13, 2009
I want to customize the tab control the tabpage headers shoud fill the tabcontrol header. if there are only two tab pages then the header should be divided into two parts and please give me good info about tabcontrol custonmization for better look and work
View 1 Replies
Nov 6, 2009
I have an application going here Form1 has a panel on it named TargetPnl. I need my TargetPnl to display my user control named Vviewer when I click my SearchBtn and also need it to disappear when I click another button.
View 1 Replies
Aug 22, 2010
I have multiple TcpClient connections to my program. The connections exist as instances of a UserConnection class, that fires events on logon attempt and when receiving messages. My program also holds a Users object, which is a list of a User class objects, holding saved data (username, password etc) for each user that is allowed to log in.
It seems convenient to put a reference object of the respective user, in the UserConnection class (when successful login is verified). Hence, when an event is raised by the connection, the connection object will hold the user reference. As any event handler logic will need to know which user is responsible for the event.
If I don't make a user reference in the UserConnection class, then I need to loop through the users (less than 20) each time, to find the correct user. Not a big deal maybe, but i'm looking to understand how it would be done by an experienced programmer.
When data needs to be sent to a user, I need to access a UserConnection object. Hence the User class also holds a reference to the UserConnection class.
View 3 Replies
Mar 13, 2009
I want to customize the tab control the tabpage headers shoud fill the tabcontrol header. if there are only two tab pages then the header should be divided into two parts
and give me good info about tabcontrol custonmization for better look and work
View 1 Replies
Apr 11, 2009
how can i call a VB function - deleteevent() in usercontrol.ascx.vb from a javascript function in clickhandler(e) in usercontrol.ascx. The call should cause a postback because I need the usercontrol to display the changes.I am currently trying to do it by using a linkbutton with style display:none, and calling its click event from the javascript function. But i dunno how to call the click event.
View 2 Replies
Oct 17, 2011
I have an aspx page that has two different user controls. I want to find user control A and be able to set properties, etc., from user control B.
I was thinking I could do something like this:
Dim CMFilters As Control = Me.Parent.FindControl("CMFilters")
...but that doesnt work to be able to set properties and call methods. I somehow need to get the user control and and declare it as that user control type.
View 2 Replies
Sep 23, 2009
Is it possible to create a WebBrowser control in a background thread in BackgroundWorker?
Private Sub BackgroundWorker1_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Using web1 As New WebBrowser[code].....
Does anyone know a way to create a background WebBrowser? I would like to do it to extract info from websites then spit out the various HTML DOM arrays
View 4 Replies
Jul 22, 2010
I used BackGroundWorker control on a Windows desktop program. It worked great and I would like to use it with other languages. Which languages does it work with -- ASP.NET, Silverlight, WPF, Class libraries (dll), console applications, services,
WCF? I see that it is in the System.ComponentModel namespace. Is that used by more than Windows desktop programs? If it's not used everywhere, is there an equivalent class on other platforms?
View 6 Replies
Dec 14, 2009
in my button click event i ececure
If BackgroundWorker4.IsBusy Then
BackgroundWorker1.CancelAsync()
End If[code]....
after proceess completed if press the button again.i got the following error msg
This BackgroundWorker is currently busy and cannot run multiple tasks concurrently.
View 6 Replies
Dec 22, 2010
In a user control I have the code shown below.
I now realize that it is incorrect because the container's InitializeComponent property initializations have not run yet and they must be run prior to Refresh being called.
How (where) can I run Refreash after the container has initialized this user control.[cod]e...
View 1 Replies
Aug 31, 2009
i am using vb.net 2005 to developed desktop application I am having two windows form user control , the first control name con.vb containing the design and code for connecting to database and getting a list of my project values in combo box.
Now the second user control report.vb which i am using to generate some reports , since the code behind is using connection to connect to various project database , so i want to get the value of
First user control into another how i can get the i have tried the below but its giving me error in run time but no error in design or code behind -
MR.MainForm.Connection1.project_combobox.SelectedV alue.ToString
Error i am getting is :
System.NullReferenceException was unhandled
Message="Object reference not set to an instance of an object."
Source="MDR"
View 1 Replies
