Run .net Application In Computer Without Installing The Whole .net Framework?
Mar 11, 2010
I've done a vb.net program. The program basically uses few reference for example system.io etc.In order for my program to run on another computer, the computer need to have .net framework 2.0 installed.Instead of installing the whole framework, can I just pack the references I used in the program together with the vb.net program.? What packager/packer program should I use and how do I go about doing it..?
View 5 Replies
ADVERTISEMENT
Sep 1, 2009
My application runs using Framework 1.1. It runs perfect when the client PCs have Framework 1.1 (without SP).After installing Framework 1.1 SP1, Framework 2.0, 3.0, 3.5 (and their Service packs), it gives a Nullreferenceexception error when adding a row to the datatable. This is the entire exception message
[Code]...
I have checked each of the values getting inserted and they all look fine. I even tried with values hardcoded but in vain. The patches cannot be avoided as they are pushed by our Corporate IT and we have no control over them.
View 1 Replies
Jun 28, 2010
I am a new Visual Basic 2008 Express Edition and just finished and distributed my first program. However, one of my users (Using Windows Vista 64-bit) cannot install my program. He gets the following error An error occurred while installing system components for <PROGRAM NAME> Setup cannot continue untill all system components have been successfully installed. Component .NET Framework 3.5 SP1 has failed to install with the following error message: "Another installation is already in progress. Complete that installation before proceeding with this install." Other 64-bit users on both Windows 7 and Vista don't have this problem.
View 2 Replies
Apr 22, 2012
When I try to install the application from the files it produces when I follow the prompts from Build - > Publish (Visual Studio 2010) onto another computer, and then run the application on the other computer, it wont connect to the SQL database on the original computer. I've been receiving a timeout error or one which says it can't find the server.I have no idea where to start looking to fix this, both computers are running XP and 4.0 .NET Framework. The computers are linked on the same network.I think my connection string is the culprit, but I don't know how it should be set up to run on multiple computers. Here's my connection string:[code]The connection string works on the application I've installed on the original computer, but not the second computer I've tried installing the application on.My second thought was that it could be the server which is wrong, I've just used the name of my computer for that, is this correct? I thought it may be because all the computers are connected on the network.
View 3 Replies
Jun 18, 2011
how to make Autorun installing for win Applicatin Visual studio that installing .net framework and sql server or all needed?
View 1 Replies
Sep 9, 2009
I created a program and published it using the wizard through the "Property" in menu.
When I used the Published program to Install it in my same computer it got installed in "StartMenu".
I didn't get the option to select the Drive for Installing it like what we get when installing other program.
how to make that option to appear on installing the program?
View 8 Replies
Feb 26, 2010
How can I create a VB application in VS2008 without requiring the application be run on a computer with a .NET framework in place?
View 4 Replies
Jun 15, 2010
is .NET framework v4 necessary to run my application created by vb2010 to run on other computer??? cause its large file to download....
View 4 Replies
May 21, 2009
I create Win32 DLL using vb.net (VS2005), for later use in vb6 application. I've try and it's workout (on my pc). I'm wondering if theres a way to distribute that dll files with my vb6 application, without installing net framwework on target pc.
If you wonder why i'm doing this, the answer The current application on target computer still using application that i've develop with vb6. My company have a plan to migrate to VB.net so i have to update a litle by litle so the old application still running until the new one (which i developed using vb.net) is ready to lunch. By the time new application running, my plan/target is i only update a minor change/installation.
View 1 Replies
Oct 29, 2011
As you all know programs created in VB require the .NET framework to be installed on the end-user's computer, BUT when I create my ClickOnce deployment you would think that it would automatically include a .NET 4.0 setup for the end-user... it does not. I have tried creating all sorts of installers which install the Microsoft .NET folder onto the end-user's machine, or the actual .NET executable file. None of these seem to work, even in third party installation creators like InnoSetup. When I go through Microsoft Documentation like this: "How to: Install Prerequisites with a ClickOnce Application" all I get is something I've already tried and does not work.
I need everything in one large setup.exe file. I don't care if it is going to take up so space, as long as it is in one file and everything is embedded together.
How do I package the .NET 4.0 framework AND make it install WITH my VB.NET application IN ONE Setup.exe file? If this isn't possible, where can I find the Actual Files of the .NET 4 Framework?
View 2 Replies
Jan 15, 2009
I have written an app using VS2008 and i now want to run this application on another computer. I need to have the dot net framework installed right?
Is it possible to use the VS2008 DVD to install just the .Net Framework on the new computer?
If not how do I install the .Net Framework on this machine?
View 3 Replies
Mar 16, 2010
Visual basic setup stops half way on windows 7 - also get fatal error on installing .net framework 4
View 1 Replies
Nov 7, 2011
I've managed to produce a simple project in vb 2010 express and to publish it onto a cd. I can install the project from the cd and run it successfully on my windows 7 machine where I developed it but trying to install it onto a windows xp machine produces the message:
"An error occurred while downloading a required file...
Details: http://go.micrtosoft.com/fwlink/?linkid=182805
View 8 Replies
Mar 11, 2011
I installed VS2010 SP1/TFS2010 SP1. Now VB solutions that built successfully now fail Rebuild with massive lists of errors, eg:
Error 14 'IsNothing' is not declared. It may be inaccessible due to its protection level. C:ProjectsNewDoxDOXLinkDocType.vb 142 12 DOXLink
Error 12 'ChrW' is not a member of 'VisualBasic'. C:ProjectsNewDoxDOXLinkDOXDBDataSet.Designer.vb 14947 120 DOXLink
Error 44 'Computer' is not a member of 'My'. C:ProjectsNewDoxDOXLinkLanFolder.vb 110 20 DOXLink
Error 15 'vbCrLf' is not declared. It may be inaccessible due to its protection
[code]....
View 1 Replies
Mar 15, 2012
Is it possible to reload a form of the running application from one computer when I executed a function from my other computer with the same application? co'z I want to see the changes of data on my datagrid view?
View 2 Replies
Jan 9, 2012
I realize this post is rather long, but I wanted to give all the information up front instead of people having to ask me for more information.At the end of the re-installation of Visual Studio 2008, there is this message:
"Microsoft SQL Publishing Wizard: [2] Error: Installation failed for component Microsoft SQL Publishing Wizard. MSI returned error code 1638" in the log file dd_error_vs_procore_90.txt.
I have searched on Google for this whole message and found some references to this error, but I have done what they said worked for them and it did not fix the problem for me.When I searched for just "MSI returned error code 1638", I got that it cannot install something because it is already installed:"Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel".In Add/Remove Programs I see these two programs:
Microsoft SQL Server Database Publishing Wizard 1.3
Microsoft SQL Server Database Publishing Wizard 1.4
Are these programs/versions what the error is refering to? Am I safe to remove them and depend on the similarly-named item which would be newly installed with Visual Studio 2008 - "Microsoft SQL Publishing Wizard"? I still use SQL Server 2000 and 2005 on my computer, as well as 2008. I had installed VS 2008 on my computer before without this problem and also have VS 2005 and 2010.
View 1 Replies
Aug 30, 2010
Is it possible to use/run a program (either the .exe from the Debug folder, or the ClickOnce Application from building) made in Visual Basic 2010 on a computer without .NET Framework 4.0, or any .NET Framework at all?
View 5 Replies
Feb 23, 2010
How can I programmatically determine if .net 2 or any other .net framework is on a computer?
View 4 Replies
Apr 24, 2012
I am having a few dramas with running my completed project on another computer. I created my project using Visual Studio 2010 (Microsoft Visual Basic 2010 Express).The error messages I get say that the program is unable to access the .NET framework. This is because the .NET framework is not loaded onto the other computer and loading it is not an option.I've done some searching on the internet and I found instructions for going from a dynamic library to a static library and building, rather than publishing the finished product for C++ 2010. So, I assume that I need to do something similar but I haven't been able to apply this to VB 2010 Express.The finished product needs to be self-contained, so that the .exe file has all the libraries and compilation instructions it needs.So, is someone able to tell me how to link up the files I need and re-package my project so that it works on any computer that runs Windows.
View 24 Replies
May 12, 2009
I am using VS .net 2003 and developing a program that calls Excel. The development computer only has Excel 2003, and the target machine only has Excel 2007. Would it be possible to install Excel 12 Object Library in the development computer without installing Excel 2007?
View 4 Replies
Jan 29, 2009
I am developing a computer application designed to monitor the network and CPU statistics on a computer remotely. The monitored computer would have my program installed and the monitoring computer would display, in a form, the information being sent from the remote client.The application does not send any information regarding packets, user names, passwords, etc. It is solely meant for monitoring CPU performance and Network resources remotely.
What would be the best method to send this information over to my host machine?I am programing in Visual Studio 2008 on windows XP. The client machine is also XP. I know this sounds a little shady, but it is required for my little business (http://www.iquorum.net) to monitor what and when something happens on our machines when I and my employees are away.
View 2 Replies
Jun 1, 2008
I have to create an online application which i can apply it on every employee's computer in my company and i have create the application on visual basic 2008 and SQL 2005 using windows application and database. The problem is i do not understand how am i going to run the application on every employee's conputer. Because i have create the application on my computer, must i install SQL on every employee's computer? or any other software i have to used.
View 8 Replies
May 30, 2009
i can publish my app fine.it creates the setup and the rest of the files, whatever they are.on my operating system, the setup runs fine.when trying to install it on another system, it asks for the microsoft 3.5.net.this update can take quite a while.how can i publish my app, in such a way that it can run from the files in the setup and not have to have any other addons, as .net framework. i know it's possible, since i was able to install other software before i had the .net framework.
View 19 Replies
Jun 9, 2009
i built a very simple application in vb.net, installed it, it worked. then i did some very slight updates, build it, tried to install it but got the following errors. i restarted computer, uninstalled app for the uninstall menu, and tried to run setup.exe and still have been getting this error.
PLATFORM VERSION INFO
Windows : 5.1.2600.196608 (Win32NT)
Common Language Runtime : 2.0.50727.3053
[code]....
View 3 Replies
Nov 3, 2009
I want to distribute this program I've made and it has a database it needs to install. So I made the setup project and put the database in the "application folder".
I built the setup project and ran it. It does successfully copy the database file into the application folder. But when I run the program it says file cannot be found, even though the file does exist and at the path specified where the program says it cannot find the file.
View 4 Replies
Feb 7, 2012
i have made a few of my own vb application using visual studio 2008.but after i publish those applications,i have to install it in order to run it.also, .net framework 3.5 is also needed.so,is there a language SIMILAR to visual basic that can make standard exe's without the need to install and no additional files necessary???? is c# something like that?
View 9 Replies
Sep 1, 2011
We are using a Windows 7 virtual machine as a testing platform for our VB 6 application. Th application utilizes an Access database.The application locates the database by looking at a configuration (ini) file.When I install the application on the virtual machine, it places a database where InstallShield directs it to and writes that path to the ini file. All well and good.However,somehow a second copy of the database is created in a user local folder.
If the user uses the "run as administrator" option, the application uses the database that is in the location designated in the ini file and that works fine. But if the user does not select the "run as administrator" option, the application apparently somehow attempts to use the local database and is unable to locate it.
Is this behavior is peculiar to the virtual machine, or is it something we need to be concerned about on "real" Windows 7 systems?If it is peculiar to the virtual machine, is there some way to get the virtual machine to behave more normally?
View 6 Replies
Jan 7, 2011
Is it possible to create a VB.Net application which users can just run without installing it first.If not, is it possible in another .Net language.The application only has to run under Windows (>= XP).
View 4 Replies
Jun 14, 2012
I am not an expert in using vb.net, but I am trying to make my vb.net project accessible to others. I've done it before (about 5 years ago) with another program. This program is basically the same just for a different product line for us. I have all the files on a server. I published everything to a directory on the server...the directory is in the same spot as the other directory. I checked all of my project properties and have now made sure they are the same as my other project. The publishing works fine. But, when I try to run the setup.exe or the .application file, I an error message that pulls up a log file. I've looked all over and found similar log files, but no solution that seemed to work. Here is what the log file is telling me. Any help would be great. I am thinking it is something simple...remember I am not an expert. And, I know I got the other one to work a few years ago when I moved it from visual basic 6.0 to vb.net. I am using Visual Basic 2008 Express Edition to work with my project.
[Code]...
View 2 Replies
Dec 14, 2010
I have created my windows from app. and published it. but i was wondering if there is any way to publish it so that the user doesnt have to install to there hard drive so when they click the .exe file it just runs the program Does anyone know of any good walkthrough's or could you let me know how to do this?
View 7 Replies
