I am confused on saving a file to a certain folder. I know how to save files and what not but what I can't figure out is this:I right clicked my project name in VS2010 -->New Folder and added a new folder. Now this folder shows up in my Solution Explorer. How to I reference this folders location?
View 5 Replieshow to access to a folder created inside the project from the code
View 1 RepliesI have added a folder with a bunch of images inside my vs2010 project. I want to reference this folder through code.Since the final prog may be deployed into different location absolute path won't do!
What is the standard way to get the folders relative path?
I am getting this error trying to save an Image to a newly created Folder.
View 8 RepliesPrivate Sub Button21_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button21.Click
If TextBox11.Text = "" Then Exit Sub
MkDir(Dir1.Path + "" + TextBox11.Text)
MsgBox("Folder Created:")
TextBox11.Text = ""
End Subok now the file i have is from my.resources.test1 put this file into the folder that wascreated after mkdir line of code i have tried differnt ways of doing it but dose not work. it seams that this whould be so easy i dont if its me getting a mind block or something
I am using windows application. in that form i place picturebox, openfiledialogue, loadimage, saveimage buttons.using loadimage button to load image into picture box.using saveimage button to save image into one folder(save image into harddisk)at the time of save image first we crop the image like height:100 and width:100 and next it saved to folder.
View 1 RepliesHow would I create a dir Inside %temp%? Then extract the file to it and Open a That folder. So far this is my code.
[Code]...
Private Sub submit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles submit.Click
m_streamWriter.BaseStream.Seek(0, SeekOrigin.End)
i += 1
m_streamWriter.Write("{0}{1}{2}{3}{4} ", i, " ", TextBox4.Text, " ", DateTime.Now.ToLongTimeString() + ControlChars.Lf)
m_streamWriter.WriteLine(" " + ControlChars.Lf)
m_streamWriter.Close()
[Code]...
What I'm trying to achieve is for a file to be copied from a templates folder to a project folder. The project folder path is constructed using the selected item in a combo box and a list box. [Code]
View 4 RepliesTo open a pdf file in my vb.net application I have used the following code. This is working fine while running from code. But when I am trying to package it through setup project and run in the installed application, file not getting opened. I am adding my UserGuide.pdf file inside Database folder in Application folder of setup project.
Try
Dim lStrHelpUserManualPath
As
String =
""
lStrHelpUserManualPath = Application.StartupPath
[Code] .....
creating a new folder on a temporary file and moving/copying a file on the newly created temporary file.
View 4 Repliesi ve created a setup file for my project using vs2005....but it doesnot run on anothor target machine..it says that the machine requires windows installer and dot net framework to run my project how do i do this??
View 3 RepliesEdit: I figured out how to save as new, now all I need to do is save an already created text file.
View 7 RepliesI have been working on this for a while and this is what I got so far.[code]...
View 4 RepliesI have an FTP connection with around 50 folders in it, I have one file that I need to upload to all of these folders, how can I get the list of these folders in there so I can go ahead and upload the file automatically? The folder # keeps increasing and I can't manually keep uploading the file to each folder.
View 2 RepliesI am currently working on a school project in VS2010. I have added a .exe file in the project folder and added it to the Project as a 'Existing Item'. In Project Properties -> Publish -> Application Files the .exe file is shown.
The .exe file runs quite nicely when I use the Process.Start("C:\NameOfMyApplicationFolder\MyProgram.exe") hard code path to the .exe file. However, I am faced with two(2) challenges that I need to overcome. These are they:
1. If published on another machine the .exe file will not run as the hard code path to the .exe file will be different from that on my machine. Therefore I need a way to create a generic path to the .exe file. I have tried these [Process.Start("C:\|DataDirectory|\MyProgram.exe")] AND [Process.Start("Localhost\|DataDirectory|\MyProgram.exe")]; I got an error message that "The system cannot find the file specified".
2. I am putting the Process.Start("xxxxx.\MyProgram.exe") on a button click event. I also want to put the running of the .exe file between two(2) lines of code. The first line of code is basically asking "Do you wish to run the executable file" - YesNo. If 'Yes' is selected the .exe file is run. Here is the problem: When the .exe program is closed the second line of code is to be executed. I have gotten the .exe to run (using the hard code file path) when 'Yes' is selected, and the second line of code to execute if 'No' is selected, but I have not been successful in getting the second line of code to execute after closing the .exe program. I have tried this: [If Process.Start("C:\NameOfMyApplicationFolder\MyProgram.exe").CloseMainWindow = True Then Do line 2 End if]. nothing happens when I close the .exe program.
I would like to know how can I make an executable file wich deletes itself and the folder it's inside.
I've tried launching cmd, making it wait for 3 seconds and then delete the directory, but it does nothing. The last lines of my code are:
Process.Start("cmd.exe", "/C ping 1.1.1.1 -n 1 -w 3000 > Nul && DEL /F /S " & Application.StartupPath)
Application.Exit()
I have no code specifically for this part of my project just saying this ahead of time.I have not used text files that are inside my project but I want to be able to open the file when I load my form and save it when I close my form.I know how to save manualy and same with opening but that defeats the purpose this has to do as much as possible on its own.All I have are code from a project I made a while back which was a notepad program.[code]however I need this to all happen on its own and it needs to install these text files with the program hence why they are in with the project there are about 30 text files that will need to be with it so if I can get help with one then I can figure the rest out.
View 3 RepliesI support applications in VB6 and VB2003, and I'm trying to upgrade the VB6 app to VB2005, so I have three versions of Visual Studio on my pc. I ran VS2005 and opened the VB6 app to launch the upgrade wizard. It seemed to run fine until it threw an error saying it could not find the project it just created. The project I'm trying to upgrade is called MGxFromSAP.vbp. The error said it could not find MGxFromSAP.vbproj. The project file it actually created is called MGxFromSAP.vbproj.vs7.vbproj. When I try to open this project in VS2005 it says it was created in an earlier version of Visual Studio and needs to be upgraded.Did it perhaps invoke the VB2003 upgrade wizard instead of the new one? How would I be able to tell?
Should I just let VS2005 upgrade the vs7 project or should I try to deinstall the old VS2003 upgrade wizard and rerun the upgrade from scratch?
I created a sign up page for my program using:
Username
Password
Address
State
ETC
How can I save all that info to a file to pull up for later use in the program? All the info was entered into text boxes and at the end of the program I have a button that is named Save Information.
Its a League Organizer, basicly ive started it off with 16 teams and end up with 1(winner) 16 box's on the far left, then 8, then 4, then 2, then 1. the 16 box's have "Team 1" "Team 2" etc... ive put a new/clear/open/save button in that order.
BUT this is my problem..when i save(Save Button) the text file saves all the text wrong it ends up like this...Team 1Team 2Team 3Team 4 Etc...
But i want it to save like this
Team 1
Team 2
Team 3
Team 4
Etc...
The code is...
Dim Save As New SaveFileDialog
Save.Filter = "Text Files (*.txt)|*.txt|ALL FILES (*.*)|*.*"
[CODE]...
I managed to create a folder in the my documents folder by typing the path name and the variable from which the folder must be named. So for example the folder variable1 was created. I want to save a file in that folder and i want the filename to be the date. I managed to do that as well but instead of saving the file into variable1 it is being saved into the my documents folder with filename: variable1(date).
View 8 RepliesI�m using VB.Net 2008 application program.I�m using DataGridView. I have a Print Preview option where i need to print the DataGridView.
Quote:
Using "DataGridView1.Rows.Add" i�m adding rows to datagridview.
I�m using this code for Print Preview.
Dim MyDataGridViewPrinter As DataGridViewPrinter
Private Function SetupThePrinting() As Boolean
Dim MyPrintDialog As PrintDialog = New PrintDialog()
[code]....
I'm using VB.Net 2008 application program.I'm using DataGridView. I have a Print Preview option where i need to print the DataGridView.Using "DataGridView1.Rows.Add" i'm adding rows to datagridview.I'm using this code for Print Preview.[code]If you know how i can Save Print Preview inside text file or Excel, please help me.
View 1 RepliesI have a case where the user or client attaches the document and the document is saved in the data base as byte stream.Now I need to get that binary data and convert it to the corresponding format and save the file in the temp folder in client system using VB.net and then I want to get the path where it was saved so that I can send it to the data base for sending DB email.
View 1 RepliesI would like to load a file from www and save it to folder. I am using Visual studio 2008 an VB in form aplication. So how to load a file from example www.test.gg and saving it to c:/myfolder/
View 3 RepliesThis seems almost to easy to ask, but I must be missing something simple.I've added a folder in the project explorer, by right clicking>add>new folderBut when I run under debug, I am unable to save to that folder as it's not in the debug folder, I get:"A Generic error occurred in GDI+"In this code, the first line saves the bitmap fine (in the debug folder), the second line fails with the above alarm..
"vb"
If Not value Is Nothing Then value.Save(Application.StartupPath & "Image.bmp")
If Not value Is Nothing Then value.Save(Application.StartupPath & "ImageImage.bmp")
[code].....
Whenever I create files in VB.net, the results go by default in the bin/Debug folder. I would like them to go in bin/Debug/Test without having to write the actual location, since the project folder may change from user to user (i.e. they don't place their project in the same folder I do).
View 8 Repliesusing VB.Net 2008 application program.Im using Dat
Code:
Dim MyDataGridViewPrinter As DataGridViewPrinter
Private Function SetupThePrinting() As Boolean
[code].......
based on the title, I want my textfile created can save at any location folder .
View 19 Replies