this code worked in every form except this form which I named Reregistration the code is working and every thing but the only problem is that the new generated data is not saved in the actual table
Private Sub btnRegister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRegister.Click
If txtPassword1.Text = txtPassword2.Text Then
[Code].....
I'm trying to create a simple Data Grid that will automatically save changes. So far I have a data grid connected to a MS Access 2007 Database that reads the data. I can create new fields in the Data Grid, but I need to program to save the data automatically to the database on update (or on close).
View 6 Repliesam pretty new to VB and i am slowly teaching myself .I am working on a project at the moment which will write to an access database. I have created the database with contains about 40 fields. i Have a form which the user inputs the data into whose controls are bound to the corresponding fields in the database . I have been reading up on what a could but the more i read the more lost i am getting.
View 1 RepliesPrivate Sub Table1BindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Table1BindingNavigatorSaveItem.Click
Dim dg As DialogResult = MessageBox.Show("Would you like to continue saving your changes?", "Save Changes?", MessageBoxButtons.YesNo)
[Code]....
In my project the "teacher" must enter grades in the Grades database then save it and click the Semester Average button(btnSA)to display the grades in the database. Well I can't the the data to save. After I completely fill in the grades and click the save button in my tool strip I get the following error "OleDbException was unhandled: Command text was not set for the command object"
Public Class Form1
Dim connStr As String = "Provider=Microsoft.Jet.OLEDB.4.0;" & "Data Source=GRADEBOOK.MDB"
[code]......
i am getting this error and i cant spot the mistake: No value given for one or more required parameters.
my code:
Sub UpdateCustomer(ByVal HCNNO As Double, ByVal Forename As String, ByVal Surname As String, ByVal DOB As String, ByVal Gender As String, ByVal PasID As String, ByVal
[code].....
rs.Open("select * from CSOptions where OrderNumber = '" & cbstrCurrOrderNumber & "' and OrderLine = " & CBLI, strConn, 2, 2)
If rs.EOF Then
rs.AddNew()
End If
[code]....
I have tried it by the following code [code]there is no error in this code, but it didn't work well.so is there anyone who can help me in making it work?
View 1 RepliesOkay what I have saves my stuff to the database. However, when I rebuild my application the previous data is gone. The data is loaded into datagridview using
[Code]...
My program runs with no errors, but the actual .accdb file does not reflect changes when I make them in the running program. Also when I fill in the text boxes and click the "Add New Item" Button, the "ID" text box displays a -1. "ID" is the primary key in my Access Database.
Imports System.Data.OleDb
Public Class addMemberForm
Inherits System.Windows.Forms.Form
[code].....
I've seen used the datagridview to save the changes.
I don't use a dgv, but rather I connect directly to access and when a text field has text in it, it takes that text and searches, and updates various text boxes with the according information (finds a row, and takes all the data in the columns and adds it into their respective box). There are approximately 5-7 text boxes being used at the same time, and only a few will be changed.
How would I go about updating and saving through the VB program?
Here are some relevant pieces of code:
Dim con As OleDbConnection = New OleDbConnection("Provider=Microsoft.jet.oledb.4.0;data source=C:\InventoryMusic.mdb")
[Code].....
I have a function that i use to save a datagridview row to an access database (which works fine) but i was wondering any one know what i should look up to figure out how to set the row that i am saving to a colour IN the access database. So the row that i save is say red in the access database.
View 10 RepliesHow to save image from picturebox1 to access database.
View 2 RepliesI can save my data to access database and in the access database field I set it to date/time.But problem is when I get the value out from the database.. the format is always month/day/year hour:minutes:seconds example today: 5/2/2011 12:00:00..How to get the value into listview becoming May/2/2011 without the hour..Here's my code to get it from database ListView1.Items(i).SubItems.Add(dt.Rows(i)(14).ToString).The second problem is.When I would like to edit, how can the datetimepicker get the listview value ? [code] info: using access 2003 (.mdb) the Date of Birth field has been set into Date/Time.
View 2 RepliesI have been using an Access Database with no problems, using a form (with a sub-form) to input all of the data. Recently the data on the sub-form is not saving to the tables/reports. I enter the data, save and close the form and re-open the record and it is not there. Previously I have been able to save all data using the form and have not altered the form.
View 3 RepliesI am using thprocedure "UpdateDatabaseBySQL"to save data in to my MS Access table using VS 2010. The problem is, sometimes when I retreive the values from the database, they are blank. But my save procedure worked well. If I pause the app for 10 seconds and query,everything works. So what I did was add System.Threading.
View 22 RepliesI want to save new data from access tables to sql tables without overwriting old data in sql. Data table format for access and sql is same. (using Visual Basic).
View 1 RepliesI have a MS Access database file that I can view with a DataGridView, but I can not save the changes made. User should be able to modify data, and when pressing the "Save" button, these changes should be reflected on the database. That is not happening.I know this is a common question, but I have read dozens of pages trying yo get this to work.
Imports System.Data.OleDb
Public Class Form1
Dim con1 As New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=T:JaimeTest.mdb;Persist Security Info=False")
Dim sql As String = "SELECT * FROM Table1"
[code]....
I am currently working on a vb project. What I am trying to do is reading a XML file and saving all the data in to the Access DB. Once this is done, I read the data from the access Db and display it in the required fields in VB form. Issue is, when i store the value in the access, a weird character is assigned before and after the data. The character is a square box with question mark in it. Also the same character displays on the VB form as well
[Code]...
I'm struggling to work with data in VB 2008, and find it extremely complicated! At first I couldn't even get a database to load, as VB 2008 kept complaining it was created with an older Jet engine.OK, I converted it to a newer Access format that VB 2008 finally accepted.
In trying to find out why changes weren't saved, I found a common problem was VB 2008 wiping out changes.OK I have told the compiler not to copy the older database file back over but to copy newer.Updates then supposedly happened --- no errors were reported --- but the changes were still not saved.It appears the update method didn't exist in the datatableadapter, but I got no error messages about that.
No update done.
I've used the tools to configure the dataset and datatableadapter.Automatic generation of methods like update, add new, delete, etc. were supposedly done.Now, when trapping the error, I'm told the update method isn't a valid one.I found little information on that. It suggested primary keys could be a cause, but adding or deleting a primary key has no effect.I can see the fill method, and it works fine.I can't see the update method. (Apparently it is in SQL which I don't know anyway.)
I keep getting an "Syntax error in Insert Into Statement." error message when trying to save an image to my Access database.
Imports System.IO
Imports System.Data.OleDb
Imports System.Drawing
[code]....
I'm working on a simple data logging program, and I have little to no database experience. I wrote a little VB forms app to log the data to ms access and then graph the data, but I'm having trouble with adding records to the database. First, I created a simple one table database in access. Then, I added the database to the project as a data source, and gave it a data set using the wizard. Right now my code looks like this:
[Code]...
There are no problems during build or run time, but I do not see changes to database after the program runs.
I'm working on a project which are generating some data from my VB.NET software and I wish to save those data into sql server. But my concerns is the speed of saving and the large amount of data. For every 0.5s, one set of data will be generated and the process will keep running for about 8 hours, so at the end of 8 hours, roughly there will be 60,000 set of data generated.May i know what is the best option/method of saving the data into the sql server in not hanging up my software and also keeping the pace with the speed of 0.5s data being generated?
- Speed of 0.5s. I have to maintained for every 0.5s, one data must be generated. Cannot delay too much.
- I can afford delay in the sql database, meant the data might not be necessary close to real time.
I am making a simple program in Visual Studio 2010.My program connects to a MySQL 5.5.8 database running on my computer through XXAMP. I have used the Connector/Net 6.3.7 for MySQL to allow me to do this.
This is the local information for the MySQL server:
Server: 127.0.0.1
Port: 3306 (default)
Username: root
Password: admin
I have successfully created a Data Source for this server. The DataSet is called 'testdbDataSet'.
This is what my program looks like:I do not want to use the navigation bar that Visual Studio gives me at the top. Instead, I want to use the buttons shown below the input fields. The btnAdd button I believe should clear the two fields. It is currently working fine. I want the btnSave button to save the stored values of the two input fields to the database. I do not know how to do this.
this is roughly the add form where i have created... i am suppose to send this information into the database that i am using which is mysql.It is suppose to grab the incident date and the Type and also a count that increases by 1 if the date is the same or else it will be back to one.
This is the code
Dim count As Integer
Dim hotelcode As Integer
[code].....
I am trying to make a program (kinda like a game, but no graphics). Well, everything on that is fine, and ive made this program once before in VB6, but that code is long gone and I am trying to make it again. Well, here is my issue. I want the users to be able to create items on the server end (as well as maps, npcs so on and so forth) and I was wondering if there is a way to do this without using a database? In VB6 I used several ini files, but this is not a recommended way of doing things anymore. I dont want each person that uses this to have to install SqlServer on their computer either.
View 4 Repliesorking with vb 2010 and ms access as data base, just newbie.im trying to save the loged out date and time to my access table by selecting from tblloghist wherein my column SystemUserID is equal to my textbox SysID(located at my form) then it will save the timelogedout by getting the value of lbltime from my form. the problem is the data type property of my column SystemUserId is in autonumber so i got error saying "Data type mismatch in criteria expression"
Dim con As New OleDbConnection
con.ConnectionString = "Provider=microsoft.jet.oledb.4.0; data source =..systemsdb.mdb"
Dim ds As New DataSet
[code].....
In my form i have a datagrid view and two textbox the textbox is bind with the datagrid..now when i click the data in the datagrid the data will go to the textbox (that's i want to happen) but when i click the update button and check my database it doesn't change.. i use ExecuteNonQuery to update my data.[code]...
View 11 RepliesI've been struggling the entire day trying to figure this out. Basically the data in my form won't save to the tableAdapter. To update the database I use:
Me.dataSetName.TableName.Rows.Add (DataRowName)
Me.tableAdapterName.Update(Me.dataSetName.TableName)
The database was created using SSMS 2008 R2 and I'm using VS 2010.
I have confirmed that the data is being stored in the data row (because when I removed data from the data row it wouldn't accept because there are NOT NULL columns) and I have followed the instructions of this form as well:[URl]..
i am getting a error went i update or save a record to my database.
View 3 Replies