I made a project in VB.NET 2008. When I update my project I change the assembly version but the problem is that when the user gets the new version they lose their user settings.[code]Note the version number in the path. Is there any way save in a location not affected by changing the version?
View 1 Replies
I am just not happy with the fact that the user.config file gtets saved in the user's account folder. Is there a way to save it in the Application's Startup Folder instead? I couldn't find any configuration properties within the PROJECT PROPERTIES which would let me change the file location.
View 2 RepliesI'm looking for a way to specify the location for the User.config file that is used for storing the My.Settings object. It appears that this is not possible. The problem for me is, I don't want to be responsible for creating several different files on the users computer that really have no use and are difficult to find and clean once an update is released. For most users, this is not a serious problem, as many will probably never update the software, and most will probably only go through a couple of updates. On my system, there are config files for every build of the application, and the same to a lesser extent will be true for my beta testers.
I can understand that MS wants to make sure that no two applications will use the same location for storing application data, but a simple [UserData] [CompanyName][ApplicationName] for storing application data will probably suffice for 99.9999 percent of the legitimate applications in the world. Bogging a user's system down with erroneous files, no matter how small, is an unnecessary drain on system resources and a potential source of problems for the user. It's bad enough that most programs leave bits and pieces of themselves all over a user's system after De-installation - this to me seems only to exaggerate this problem.
Is the only way to get around this problem to write a whole new Settings Class? Is there a way to change the location of the UserConfig file to a more friendly (and more predictable) location that I am not finding for myself? It would seem that having at least the OPTION to specify a location for the User.Config file would be OBVIOUS and easy to implement, so why did they leave this out?
I've just started using user settings. This works ok however I'm having problems with the location of user.config.
When I run the project in Studio, user.config seems to be stored in a different place than when I build the project.
In fact every time I build it the location seems to change - users therefore lose their settings every time the project is built, which seems pretty useless.
The GUID & Assembly names etc do not change.
the My.Settings data is saved in the AppDataLocal folder for a user based on company.Then, inside the company folder there will be a folder for any applications published by that company, which contain the user.config file for that program.
C:Documents and SettingsRobert BurkeLocal SettingsApplication DataSerysoftSysPad.exe_Url_qr40iotmbi1lvvl4b5lecnfpoqogr5uw
The thing is, the folder for each program has a string of random alphanumeric characters at the end. I noticed that on both my XP and Win7 machine, the string is the same. What I am wanting to do is save the user.config file, but the only way to do this, seemingly, would be to hardcode that folder into the path to get the user.config file from.
how that string is generated, and what may possibly cause it to change in other releases even though, so far, it has stayed the same for several of my releases. I don't want to release a version one day and the string change and then it break my program.
My application is a service application, and it needs to load a set of configuration that the user can change. I was using the System.Configuration classes to set up the app.config file, and then I was going to give the user the option of editing this file to change configuration.
Can I move this file to a custom directory, something like C:settingsapp.config? Or is it forced to reside in the app directory?
Im trying to make a program that works a bit like the log in on a computer. But i cant make it load a different .config file depending on what username is used. I want it to load a config file from different directories that match the username. eg if the username was bob then it could be: C:MyProgramLoginBobapp.config I've been teaching myself and this has had me stuck for ages.
View 16 RepliesI have an application that has a load of values in its app.exe.config file. The application is used by a few users, and the settings would change on a regular basis. so im having to change the config file, and send it out to all users.
I'd love to move the config file to the network somewhere and point the app to this file. ive tried to use;
Imports System.Configuration.ConfigurationManager
OpenExeConfiguration("I:app configHelpDeskQuickCallLogger.exe.config")
But i cant get it to read in the values.
I am creating a windows service in VS2010, and in order to store a user's input during installation I've been told to write it to a file called app.config.However i cannot find this app.config file? Does it create one in a windows service project? or just in a WCF windows service project?
View 1 Repliesin vb.net i am trying to save application settings but for USER but i cannot find the user.config file
when does this file get created?
i searched my entire hardrive. i also searched the entire project.
I am writting an appplication that will allow a user to open word and then save that file in a specific location, so it becomes 'attached' to what they were working on.
I thought the best way to do this was to make a change in the registry then open word, so far i have[code]...
i would like to be able to set the change the default file location. for example if i do a filestream on a "file.txt", i want it to look by default in the desktop. is there somewhere in the settings of vb.net express 2008 where i can change this default location of working with files?
View 1 RepliesIs there equivalent for getevn/setenv functions in VB.NET. I have looked at system.Environment.GetEnvironmentVariable but it gives the system environment variables like USERNAME, COMPUTERNAME etc. I need to get the variables that are stored in config.user file. Is there any way to do that in VB>NET.
View 2 RepliesSomehow the User.Config file was corrupted for an instance of my VB .NET app. When access one of my user level config property (My.Settings.MyProp) I get the a ConfigurationErrorsException with the message "Configuration system failed to initialize." I looked at the User.Config file and found that it is empty, it can be opened but there is no XML text contained within.I would like to programmatically fix the file if an exception is seen. When I attempt to use any of my user level properties, I continue to get the same exception. I've tried calling the Reset() but that yeilds the same exception. I then tried Save() to see if it would write out a default version, but it appears to do nothing (the file is not updated). My.Settings appears to be useless at this point.How can I reinitialize the User.Config file to the default config settings without deleting the old file? I would think that there should be some mechanism for restoring this file back to its default. And how can I update/reinitialize the My.Settings instance so that I can access the properties normally?
View 17 RepliesI have a program that runs fine in the debugger. I started on the project in x86 mode this January and I've always been able to run it outside of the debugger, but this is the first time I've seen this error.The error says "ConfigurationErrorException was unhandled: Configuration system failed to initialize."The InnerException of the error said that the error was in the user.config file, and it gave me the directory of the user.config file that it was using. So I clicked synchronize in the project settings thinking that it would overwrite the current user.config file and that would probably fix the error. When it showed the confirmation dialog that it would delete the user.config file, I noticed that it had "vshost" in the directory.
View 1 RepliesAfter reading through a bunch of stuff, I was curious what production developers use for config files. I know that there is an app.config file that can be modified by the user of the program w/ settings. I also know I can create my own .xml file or .ini file to store settings as well. I wanted to know from the production side, what do you use and why?
View 1 RepliesI know that when using my.settings that when I exit my app that it saves them and then next reload it imports my.settings back.
My question, is there a way to create this user.config file on the apps first load?
I am trying to obtain a file path that users manually enter on a web page, and then write it to the web.config file.
View 4 RepliesDon't know if this is possible, but I'd like a config section to be generated when another developer adds my dll to their project. This way they don't have to look up in code or a doc as to what they need to put in their config file.
View 3 Replieson my program i have an activation in it and in order to activate the program you need to enter a code that is stored in the settings. so i was looking through my computer and i found the programs config file. and so I opened it and i found all of the codes for the activation. I need to find out how to make the file so the user doesn't have access to it and then how to move it to a more hidden place in the C: drive.
View 3 RepliesIs it possible to have location authorization nodes in a web.config be external?
Such that I could take all of the nodes simlar to
[Code]...
And move them outside of the web.config or something simlar? I find these nodes at an extreme amount of noise to a web.config when they're relatively static. Normally my approach would be to config source something like this but since it falls under the root node I'm not sure of it's possible with these nodes.
I've been getting "Connection forcibly closed" errors and in researching a resolution, I have seen suggestions to money with the following web.config options, which currently are not set in my web app. Before I change them, I'd like to know what they are currently set to. Can someone tell me how to read these values from .NET code, preferably VB.NET, though C# is fine.
[Code]...
A Windows service written in VB.NET is using the My.Settings namespace for simplicity. There are only three settings to read, and these are read within the constructor of the ServiceLauncher.
I am attempting to install the service as such:
installutil GID.ServiceLauncher.exe
And this is successful, however the config settings it is using are not the ones within the GID.ServiceLauncher.exe.config file, instead it is using the ones baked into the app as Default Settings within Settings.Designer.vb (marked with DefaultSettingValueAttribute). [The questionable wisdom of Microsoft not allowing a developer to ignore default settings is another question entirely].
How can I further diagnose this issue, and maybe force a reload of settings? I tried calling My.Settings.Default.Reload, however this did nothing. All settings are application settings, and only differ by "value" from those in the auto generated file.
I have successfully attached the debugger using System.Diagnostics.Debugger.Launch() and true enough, the settings are still the default settings.
In anticipation of the question, the background: The reason for requiring configuration settings is because this is a very straightforward service that simply executes an exe; and this exe is in configurable location. There are other reasons also, such as I wish to have the service name configurable without recompiling.
How do you read the default values from the appName.exe.config file? My application only reads these values on first installation. Subsequently, it reads the updated values sitting in the user.config file.
View 2 Repliesset a default printer run time(value from appsettings on app.config)
View 1 Repliesis there any tool to validate configuration file?
View 1 RepliesI need to print the contents of 3 textboxs to default printer. what examples I have found dont seem to work. I was trying the documentprint1 component as i thought it would be easy but cant figure out how to tell it what to print the second part is to print a variable (string) to the printer as well.no need for user to select just straight to default printer with its default settings
View 1 RepliesEvery time I compile my app and the version number changes (I have an auto-incrementing build number), I lose the user-configured app.config settings, since they're stored in the AppData folder for a specific version. Essentially, every release of my application starts from scratch as far as user settings go.
While this is a mild annoyance in development, it raises the question as I approach deployment/release - if I use the app.config to store my user settings, will the user's personalized settings be hosed every time they install a patch that changes the version number of my app? If so, is there an easy way to "upgrade" the settings from the previous release? I know that using HKCU in the registry is another option, but I like the ease of the My.Settings namespace, and I'd like to stay with app.config.
I need to set a string stored in registry as the default location of a setup file how to do in vb.net (visual studio 2008)
View 1 RepliesI'm a beginner. I recently developed an application in C#. Now I wanna develop its setup. I read a few articles online, followed them, found it very easy. I also changed the default location of application folder from C:Program Files to C:. My application folder is containing a few folders besides exe and dlls which I added manually.
Now here the problem starts, when I install the application and change the location say from c: to d:, my files (all files including exe and dll) are going to user's given location. But my folders (all folders in application folder) are going to c: (which is default location given while creating setup). But I want output files and that folders at same location
